- 03 10月, 2010 2 次提交
-
-
由 Stefan Weil 提交于
Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
Since version 4.4.x, gcc supports additional format attributes. __attribute__ ((format (gnu_printf, 1, 2))) should be used instead of __attribute__ ((format (printf, 1, 2)) because QEMU always uses standard format strings (even with mingw32). The patch replaces format attribute printf / __printf__ by macro GCC_FMT_ATTR which uses gnu_printf if supported. It also removes an #ifdef __GNUC__ (not needed any longer). Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 02 7月, 2010 2 次提交
-
-
由 Jan Kiszka 提交于
Ported commands that are marked 'user_only' will not be considered for QMP monitor sessions. This allows to implement new commands that do not (yet) provide a sufficiently stable interface for QMP use. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Jan Kiszka 提交于
As we want to add more flags to monitor commands, convert the only so far existing one accordingly. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 04 5月, 2010 1 次提交
-
-
由 Luiz Capitulino 提交于
It's emitted when the Virtual Machine resumes execution. We currently have the STOP event but don't have the matching RESUME one, this means that clients are notified when the VM is stopped but don't get anything when it resumes. Let's fix that as it's already causing some trouble to libvirt. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 3月, 2010 1 次提交
-
-
由 Markus Armbruster 提交于
Missed in commit 827b0813. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 17 3月, 2010 1 次提交
-
-
由 Markus Armbruster 提交于
-
- 16 3月, 2010 3 次提交
-
-
由 Markus Armbruster 提交于
-
由 Markus Armbruster 提交于
This separates the monitor part from the QError part.
-
由 Markus Armbruster 提交于
Commits 376253ec..731b0364 introduced global variable cur_mon, which points to the "default monitor" (if any), except during execution of monitor_read() or monitor_control_read() it points to the monitor from which we're reading instead (the "current monitor"). Monitor command handlers run within monitor_read() or monitor_control_read(). Default monitor and current monitor are really separate things, and squashing them together is confusing and error-prone. For instance, usb_host_scan() can run both in "info usbhost" and periodically via usb_host_auto_check(). It prints to cur_mon, which is what we want in the former case: the monitor executing "info usbhost". But since that's the default monitor in the latter case, it periodically spams the default monitor there. A few places use cur_mon to log stuff to the default monitor. If we ever log something while cur_mon points to current monitor instead of default monitor, the log temporarily "jumps" to another monitor. Whether that can or cannot happen isn't always obvious. Maybe logging to the default monitor (which may not even exist) is a bad idea, and we should log to stderr or a logfile instead. But that's outside the scope of this commit. Change cur_mon to point to the current monitor. Create new default_mon to point to the default monitor. Update users of cur_mon accordingly. This fixes the periodical spamming of the default monitor by usb_host_scan(). It also stops "log jumping", should that problem exist.
-
- 09 3月, 2010 3 次提交
-
-
由 Luiz Capitulino 提交于
It's emitted whenever the watchdog device's timer expires. The action taken is provided in the 'data' member. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Emitted whenever the RTC time changes. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This event has been introduced in the first round of QMP commits, turns out that it's based on the usage of the EXCP_DEBUG macro, which has discussable semantics when exposed through QMP. As libvirt doesn't use this, let's just drop it. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 20 2月, 2010 1 次提交
-
-
由 Luiz Capitulino 提交于
Not that trivial as the call chain also has to be modified. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 2月, 2010 1 次提交
-
-
由 Luiz Capitulino 提交于
This commit adds the basic definitions for the BLOCK_IO_ERROR event, but actual event emission will be introduced by the next commits. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 1月, 2010 1 次提交
-
-
由 Adam Litke 提交于
Qemu has a number of commands that can operate asynchronously (savevm, migrate, etc) and it will be getting more. For these commands, the user monitor needs to be suspended, but QMP monitors could continue to to accept other commands. This patch introduces a new command API that isolates the details of handling different monitor types from the actual command execution. A monitor command can use this API by implementing the mhandler.cmd_async handler (or info_async if appropriate). This function is responsible for submitting the command and does not return any data although it may raise errors. When the command completes, the QMPCompletion callback should be invoked with its opaque data and the command result. The process for submitting and completing an asynchronous command is different for QMP and user monitors. A user monitor must be suspended at submit time and resumed at completion time. The user_print() function must be passed to the QMPCompletion callback so the result can be displayed properly. QMP monitors are simpler. No submit time setup is required. When the command completes, monitor_protocol_emitter() writes the result in JSON format. This API can also be used to implement synchronous commands. In this case, the cmd_async handler should immediately call the QMPCompletion callback. It is my hope that this new interface will work for all commands, leading to a drastically simplified monitor.c once all commands are ported. Signed-off-by: NAdam Litke <agl@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 20 1月, 2010 3 次提交
-
-
由 Luiz Capitulino 提交于
It's emitted when a VNC client session is activated by QEMU, client's information such as port, IP and auth ID (if the session is authenticated) are provided. Event example: { "event": "VNC_INITIALIZED", "timestamp": {"seconds": 1263475302, "microseconds": 150772}, "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0"}, "client": { "family": "ipv4", "service": "46089", "host": "127.0.0.1", "sasl_username": "lcapitulino" } } } Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It's emitted when a VNC client disconnects from QEMU, client's information such as port and IP address are provided. Event example: { "event": "VNC_DISCONNECTED", "timestamp": { "seconds": 1262976601, "microseconds": 975795 }, "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0" }, "client": { "family": "ipv4", "service": "58425", "host": "127.0.0.1", "sasl_username": "foo" } } } Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It's emitted when a VNC client connects to QEMU, client's information such as port and IP address are provided. Note that this event is emitted right when the connection is established. This means that it happens before authentication procedure and session initialization. Event example: { "event": "VNC_CONNECTED", "timestamp": { "seconds": 1262976601, "microseconds": 975795 }, "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0" }, "client": { "family": "ipv4", "service": "58425", "host": "127.0.0.1" } } } Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 12 12月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
This reverts commit adcb181a. Conflicts: monitor.h Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 12月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Partially fixes mingw32 build. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 03 12月, 2009 4 次提交
-
-
由 Luiz Capitulino 提交于
Debug, shutdown, reset, powerdown and stop are all basic events, as they are very simple they can be added in the same commit. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Asynchronous events are generated with a call to monitor_protocol_event(). This function builds the right data-type and emit the event right away. The emitted data is always a JSON object and its format is as follows: { "event": json-string, "timestamp": { "seconds": json-number, "microseconds": json-number }, "data": json-value } This design is based on ideas by Amit Shah <amit.shah@redhat.com>. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This commit adds a flag called 'control' to the '-monitor' command-line option. This flag enables control mode. The syntax is: qemu [...] -monitor control,<device> Where <device> is a chardev (excluding 'vc', for obvious reasons). For example: $ qemu [...] -monitor control,tcp:localhost:4444,server Will run QEMU in control mode, waiting for a client TCP connection on localhost port 4444. NOTE: I've tried using QemuOpts for this, but turns out that it will try to parse the device part, which should be untouched. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This flag will be set when Monitor enters "control mode", in which the output will be defined by the QEMU Monitor Protocol. This also introduces a macro to check if the flag is set. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 9月, 2009 1 次提交
-
-
由 Luiz Capitulino 提交于
Command handlers will have to use QDict functions, so export qdict.h through monitor.h. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 7月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 06 3月, 2009 4 次提交
-
-
由 aliguori 提交于
This allows to create monitor terminals that do not make use of the interactive readline back-end but rather send complete commands. The pass-through monitor interface of the gdbstub will be an example. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6717 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Currently all registered (and activate) monitor terminals work in broadcast mode: Everyone sees what someone else types on some other terminal and what the monitor reports back. This model is broken when you have a management monitor terminal that is automatically operated and some other terminal used for independent guest inspection. Such additional terminals can be multiplexed device channels or a gdb frontend connected to QEMU's stub. Therefore, this patch decouples the buffers and states of all monitor terminals, allowing the user to operate them independently. It finally starts to use the 'mon' parameter that was introduced earlier with the API rework. It also defines the default monitor: the first instantance that has the MONITOR_IS_DEFAULT flag set, and that is the monitor created via the "-monitor" command line switch (or "vc" if none is given). As the patch requires to rework the monitor suspension interface, it also takes the freedom to make it "truely" suspending (so far suspending meant suppressing the prompt, but inputs were still processed). Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6715 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
There is no use for the hide/show banner option, and it is applied inconsistently anyway (or what makes the difference between -serial mon:stdio and -nographic for the monitor?). So drop this mode. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6713 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
-