Fixes cold reset in vmware graphic modes. We need to split up the reset
function for this purpose, breaking out init-once bits.

Cc: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If the polarity bit is set in the redirection table, the input level
simply has to inverted as it is low active in this case.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Polarity of external interrupts needs to be handled in the IOAPIC.
Passing it to the APIC is pointless. So remove all these arguments.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In TCG mode, iothread and vcpus run in lock-step. So it's pointless to
send a signal from qemu_cpu_kick to the vcpu thread - if we got here,
the receiver already left the vcpu loop.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Polling until select returns empty fdsets helps to reduce the switches
between iothread and vcpus. The benefit of this patch is best visible
when running an SMP guest on an SMP host in emulation mode.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If we call select without a timeout, it's more efficient to keep the
global mutex locked as we may otherwise just play ping pong with a
vcpu thread contending for it. This is particularly important for TCG
mode where we run in lock-step with the vcpu thread.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The legacy functions that we're wrapping expect that offset
to be included in the register.  Indeed, they generally
expect the absolute address and then mask off the "high" bits.

The FDC is the first converted device with a non-zero offset.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>

After 312b4234, the APIC and PCI devices are colliding with each other.  This
is harmless in practice because the APIC accesses are special cased and never
make there way onto the bus.

Avi is working on a proper fix, but until that's ready, avoid printing the
warning.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The current implementation of PAM and the PCI holes is broken in several
ways:

  - PCI BARs are not restricted to the PCI hole (a BAR may hide memory)
  - PCI devices do not respect PAM (if a PCI device maps a region while
    PAM maps the region to RAM, the request will be honored)

This patch fixes things by introducing a pci address space, and using
memory region aliases to represent PAM regions, SMRAM, and PCI holes.

The memory hierarchy looks something like

system_memory
 |
 +--- low memory alias (0-0xe0000000)
 |      |
 |      +-- ram@0
 |
 +--- high memory alias (0x100000000-EOM)
 |      |
 |      +-- ram@0xe0000000
 |
 +--- pci hole alias (end of low memory-0x100000000)
 |      |
 |      +-- pci@end-of-low-memory
 |
 |
 +--- pam[n] (0xc0000-0xc3fff etc) (when set to pci, priority 1)
 |      |
 |      +-- pci@0xc4000 etc
 |
 +--- smram (0xa0000-0xbffff) (when set to pci/vga, priority 1)
        |
        +-- pci@0xa0000 etc

ram (simple ram region)

pci
 |
 +--- BARn
 |
 +--- VGA 0xa0000-0xbffff
 |
 +--- ROMs
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Instead, use the bus accessors, or get the address space directly
from the board constructor.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Returns the PCI address space.  Useful for bridges that can obscure
part of the PCI address space.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A helper that returns the address space used by ISA devices.  Useful
for getting rid of isa_mem_base, multiple ISA buses, or ISA buses behind
bridges.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This problem with this function is that it is not reversible - it is
impossible to know where things are registered and unregister them
exactly.  As there are no more users, we can remove it.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Not a huge step forward, but at least we now have a 1:1 relationship
between registration and unregistration.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This tells the sysbus code it need not use IO_MEM_UNASSIGNED.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

sysbus_init_mmio_cb() uses the destructive IO_MEM_UNASSIGNED to remove a
region.  Provide an alternative that calls an unmap callback, so the removal
may be done non-destructively.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Clumsy due to the lack of clipping support, needed for
changing exposed ram size.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Assuming that mmcfg size cannot change at runtime.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Somewhat clumsy since it needs a variable sized region.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Avoid #include hell.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Improvements to the libtool support in QEMU. Replace hard coded
libtool in the infrastructure with $(LIBTOOL) and allow
overriding the libtool binary used via the configure
script.
Reviewed-by: NAndreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: NBrad Smith <brad@comstyle.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

SetFilePointer returns INVALID_SET_FILE_POINTER when it fails.
In addition, GetLastError must be checked.

The first call of SetFilePointer did not use INVALID_SET_FILE_POINTER,
the second call used wrong error handling.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Without this change, when using -Wl,--as-needed with GNU linker, the
libraries would be discarded.
Signed-off-by: NDiego Elio Pettenò <flameeyes@flameeyes.eu>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix code format to make checkpatch.pl happy.
Signed-off-by: NRobert Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some guests will use the standard MII status register
to verify link state.  They will not notice link changes
unless this register is updated.

Verified with Linux 3.0 and Windows XP guests.

Without this patch, ethtool will report speed and duplex as
unknown when the link is down, but still report the link as
up.  This is because the Linux e1000 driver checks the
mac_reg[STATUS] register link state before it checks speed
and duplex, but uses the phy_reg[PHY_STATUS] register for
the actual link state check.  Fix by updating both registers
on link state changes.

Linux guest before:

 (qemu) set_link e1000.0 off

 kvm-sid:~# ethtool eth0
 Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Speed: Unknown!
        Duplex: Unknown! (255)
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: Unknown
        Supports Wake-on: umbg
        Wake-on: d
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: yes

 (qemu) set_link e1000.0 on

Linux guest after:

 (qemu) set_link e1000.0 off
 [   63.384221] e1000: eth0 NIC Link is Down

 kvm-sid:~# ethtool eth0
 Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Speed: Unknown!
        Duplex: Unknown! (255)
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: Unknown
        Supports Wake-on: umbg
        Wake-on: d
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: no

 (qemu) set_link e1000.0 on
 [   84.304582] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>