Store the TPM interface, the actual object may be different from
TPMState. Keep a reference on the interface, and check the backend
wasn't already initialized.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This is a better location than hw/tpm, since we are going to use the
interface from outside hw/tpm.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This field slipped in commit 5086bf97.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

HMP pull 2017-12-14

# gpg: Signature made Thu 14 Dec 2017 12:46:41 GMT
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-hmp-20171214:
  tests: test-hmp: print command execution result
  hmp-commands: Remove the deprecated usb_add and usb_del
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * xilinx_spips: set reset values correctly
 * MAINTAINERS: fix an email address
 * hw/display/tc6393xb: limit irq handler index to TC6393XB_GPIOS
 * nvic: Make systick banked for v8M
 * refactor get_phys_addr() so we can return the right format PAR
   for ATS operations
 * implement v8M TT instruction
 * fix some minor v8M bugs
 * Implement reset for GICv3 ITS
 * xlnx-zcu102: Add support for the ZynqMP QSPI

# gpg: Signature made Wed 13 Dec 2017 18:01:31 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20171213: (43 commits)
  xilinx_spips: Use memset instead of a for loop to zero registers
  xilinx_spips: Set all of the reset values
  xilinx_spips: Update the QSPI Mod ID reset value
  MAINTAINERS: replace the unavailable email address
  hw/display/tc6393xb: limit irq handler index to TC6393XB_GPIOS
  nvic: Make systick banked
  nvic: Make nvic_sysreg_ns_ops work with any MemoryRegion
  target/arm: Extend PAR format determination
  target/arm: Remove fsr argument from get_phys_addr() and arm_tlb_fill()
  target/arm: Ignore fsr from get_phys_addr() in do_ats_write()
  target/arm: Use ARMMMUFaultInfo in deliver_fault()
  target/arm: Convert get_phys_addr_pmsav8() to not return FSC values
  target/arm: Convert get_phys_addr_pmsav7() to not return FSC values
  target/arm: Convert get_phys_addr_pmsav5() to not return FSC values
  target/arm: Convert get_phys_addr_lpae() to not return FSC values
  target/arm: Convert get_phys_addr_v6() to not return FSC values
  target/arm: Convert get_phys_addr_v5() to not return FSC values
  target/arm: Remove fsr argument from arm_ld*_ptw()
  target/arm: Provide fault type enum and FSR conversion functions
  target/arm: Implement TT instruction
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

VFIO updates for v2.12

 - Fix bug failing to register all but the first group attached to
   a container with kvm-vfio device (Alex Williamson)

 - Explicit QLIST init (Yi Lui)

 - SPAPR IOMMU v1 fallback (Alexey Kardashevskiy)

 - Remove unused structure fields (Alexey Kardashevskiy)

# gpg: Signature made Wed 13 Dec 2017 18:03:48 GMT
# gpg:                using RSA key 0x239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B  8A90 239B 9B6E 3BB0 8B22

* remotes/awilliam/tags/vfio-update-20171213.0:
  vfio-pci: Remove unused fields from VFIOMSIXInfo
  vfio/spapr: Allow fallback to SPAPR TCE IOMMU v1
  vfio/common: init giommu_list and hostwin_list of vfio container
  vfio: Fix vfio-kvm group registration
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Provide HMP monitor command execution result as it would be seen
by user who established an HMP monitor session.

Currently many commands may silently fail without any sign of that.
This patch let this info to be printed once test is running in
verbose mode.

For the future it might be useful to fail the test if command has
failed, however it would require a bit of rework inside test
engine itself.

A simple example of silent failure without reporting it would to
add some non-existent HMP command into 'hmp_cmds' list. In this case
test will report it successfully passed without error.
Signed-off-by: NVadim Galitsyn <vadim.galitsyn@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20171023151310.6462-5-vadim.galitsyn@profitbricks.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

It's easy to use device_add and device_del as replacement instead.
The usb_add and usb_del commands are deprecated since QEMU 2.10,
and nobody complained that they are still needed, so let's get rid
of them now to make the HMP interface a little bit less overloaded.
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1512073140-17672-1-git-send-email-thuth@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

Use memset() instead of a for loop to zero all of the registers.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NKONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: NFrancisco Iglesias <frasse.iglesias@gmail.com>
Message-id: c076e907f355923864cb1afde31b938ffb677778.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Following the ZynqMP register spec let's ensure that all reset values
are set.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NFrancisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 19836f3e0a298b13343c5a59c87425355e7fd8bd.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update the reset value to match the latest ZynqMP register spec.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NKONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: NFrancisco Iglesias <frasse.iglesias@gmail.com>
Message-id: c03e51d041db7f055596084891aeb1e856e32b9f.1513104804.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since I'm not working as an assignee in Linaro, replace the Linaro email
address with my personal one.
Signed-off-by: NZhaoshenglong <zhaoshenglong@huawei.com>
Message-id: 1513058845-9768-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The ctz32() routine could return a value greater than
TC6393XB_GPIOS=16, because the device has 24 GPIO level
bits but we only implement 16 outgoing lines. This could
lead to an OOB array access. Mask 'level' to avoid it.
Reported-by: NMoguofang <moguofang@huawei.com>
Signed-off-by: NPrasad J Pandit <pjp@fedoraproject.org>
Message-id: 20171212041539.25700-1-ppandit@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For the v8M security extension, there should be two systick
devices, which use separate banked systick exceptions. The
register interface is banked in the same way as for other
banked registers, including the existence of an NS alias
region for secure code to access the nonsecure timer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1512154296-5652-3-git-send-email-peter.maydell@linaro.org

Generalize nvic_sysreg_ns_ops so that we can pass it an
arbitrary MemoryRegion which it will use as the underlying
register implementation to apply the NS-alias behaviour
to. We'll want this so we can do the same with systick.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1512154296-5652-2-git-send-email-peter.maydell@linaro.org

Now that do_ats_write() is entirely in control of whether to
generate a 32-bit PAR or a 64-bit PAR, we can make it use the
correct (complicated) condition for doing so.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1512503192-2239-13-git-send-email-peter.maydell@linaro.org
[PMM: Rebased Edgar's patch on top of get_phys_addr() refactoring;
 use arm_s1_regime_using_lpae_format() rather than
 regime_using_lpae_format() because the latter will assert
 if passed ARMMMUIdx_S12NSE0 or ARMMMUIdx_S12NSE1;
 updated commit message appropriately]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

All of the callers of get_phys_addr() and arm_tlb_fill() now ignore
the FSR values they return, so we can just remove the argument
entirely.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-12-git-send-email-peter.maydell@linaro.org

In do_ats_write(), rather than using the FSR value from get_phys_addr(),
construct the PAR values using the information in the ARMMMUFaultInfo
struct. This allows us to create a PAR of the correct format regardless
of what the translation table format is.

For the moment we leave the condition for "when should this be a
64 bit PAR" as it was previously; this will need to be fixed to
properly support AArch32 Hyp mode.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-11-git-send-email-peter.maydell@linaro.org

Now that ARMMMUFaultInfo is guaranteed to have enough information
to construct a fault status code, we can pass it in to the
deliver_fault() function and let it generate the correct type
of FSR for the destination, rather than relying on the value
provided by get_phys_addr().

I don't think there are any cases the old code was getting
wrong, but this is more obviously correct.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-10-git-send-email-peter.maydell@linaro.org

Make get_phys_addr_pmsav8() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-9-git-send-email-peter.maydell@linaro.org

Make get_phys_addr_pmsav7() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-8-git-send-email-peter.maydell@linaro.org

Make get_phys_addr_pmsav5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.

Note that PMSAv5 does not define any guest-visible fault status
register, so the different "fsr" values we were previously
returning are entirely arbitrary. So we can just switch to using
the most appropriae fi->type values without worrying that we
need to special-case FaultInfo->FSC conversion for PMSAv5.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-7-git-send-email-peter.maydell@linaro.org

Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-6-git-send-email-peter.maydell@linaro.org

Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-5-git-send-email-peter.maydell@linaro.org

Make get_phys_addr_v5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-4-git-send-email-peter.maydell@linaro.org

All the callers of arm_ldq_ptw() and arm_ldl_ptw() ignore the value
that those functions store in the fsr argument on failure: if they
return failure to their callers they will always overwrite the fsr
value with something else.

Remove the argument from these functions and S1_ptw_translate().
This will simplify removing fsr from the calling functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-3-git-send-email-peter.maydell@linaro.org

Currently get_phys_addr() and its various subfunctions return
a hard-coded fault status register value for translation
failures. This is awkward because FSR values these days may
be either long-descriptor format or short-descriptor format.
Worse, the right FSR type to use doesn't depend only on the
translation table being walked -- some cases, like fault
info reported to AArch32 EL2 for some kinds of ATS operation,
must be in long-descriptor format even if the translation
table being walked was short format. We can't get those cases
right with our current approach.

Provide fields in the ARMMMUFaultInfo struct which allow
get_phys_addr() to provide sufficient information for a caller to
construct an FSR value themselves, and utility functions which do
this for both long and short format FSR values, as a first step in
switching get_phys_addr() and its children to only returning the
failure cause in the ARMMMUFaultInfo struct.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NStefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-2-git-send-email-peter.maydell@linaro.org

Implement the TT instruction which queries the security
state and access permissions of a memory location.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-8-git-send-email-peter.maydell@linaro.org

For the TT instruction we're going to need to do an MPU lookup that
also tells us which MPU region the access hit. This requires us
to do the MPU lookup without first doing the SAU security access
check, so pull the MPU lookup parts of get_phys_addr_pmsav8()
out into their own function.

The TT instruction also needs to know the MPU region number which
the lookup hit, so provide this information to the caller of the
MPU lookup code, even though get_phys_addr_pmsav8() doesn't
need to know it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-7-git-send-email-peter.maydell@linaro.org
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>

The TT instruction is going to need to look up the MMU index
for a specified security and privilege state. Refactor the
existing arm_v7m_mmu_idx_for_secstate() into a version that
lets you specify the privilege state and one that uses the
current state of the CPU.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-6-git-send-email-peter.maydell@linaro.org
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>

For M profile, we currently have an mmu index MNegPri for
"requested execution priority negative". This fails to
distinguish "requested execution priority negative, privileged"
from "requested execution priority negative, usermode", but
the two can return different results for MPU lookups. Fix this
by splitting MNegPri into MNegPriPriv and MNegPriUser, and
similarly for the Secure equivalent MSNegPri.

This takes us from 6 M profile MMU modes to 8, which means
we need to bump NB_MMU_MODES; this is OK since the point
where we are forced to reduce TLB sizes is 9 MMU modes.

(It would in theory be possible to stick with 6 MMU indexes:
{mpu-disabled,user,privileged} x {secure,nonsecure} since
in the MPU-disabled case the result of an MPU lookup is
always the same for both user and privileged code. However
we would then need to rework the TB flags handling to put
user/priv into the TB flags separately from the mmuidx.
Adding an extra couple of mmu indexes is simpler.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-5-git-send-email-peter.maydell@linaro.org

When we added the ARMMMUIdx_MSUser MMU index we forgot to
add it to the case statement in regime_is_user(), so we
weren't treating it as unprivileged when doing MPU lookups.
Correct the omission.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-4-git-send-email-peter.maydell@linaro.org
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>

In ARMv7M the CPU ignores explicit writes to CONTROL.SPSEL
in Handler mode. In v8M the behaviour is slightly different:
writes to the bit are permitted but will have no effect.

We've already done the hard work to handle the value in
CONTROL.SPSEL being out of sync with what stack pointer is
actually in use, so all we need to do to fix this last loose
end is to update the condition we use to guard whether we
call write_v7m_control_spsel() on the register write.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-3-git-send-email-peter.maydell@linaro.org

For v8M it is possible for the CONTROL.SPSEL bit value and the
current stack to be out of sync. This means we need to update
the checks used in reads and writes of the PSP and MSP special
registers to use v7m_using_psp() rather than directly checking
the SPSEL bit in the control register.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>

Voiding the ITS caches is not supposed to happen via
individual register writes. So we introduced a dedicated
ITS KVM device ioctl to perform a cold reset of the ITS:
KVM_DEV_ARM_VGIC_GRP_CTRL/KVM_DEV_ARM_ITS_CTRL_RESET. Let's
use this latter if the kernel supports it.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1511883692-11511-5-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update headers against v4.15-rc1.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1511883692-11511-4-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

At the moment the ITS is not properly reset and this causes
various bugs on save/restore. We implement a minimalist reset
through individual register writes but for kernel versions
before v4.15 this fails voiding the vITS cache. We cannot
claim we have a comprehensive reset (hence the error message)
but that's better than nothing.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1511883692-11511-3-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

From the very beginning, post_load() was called from common
reset. This is not standard and obliged to discriminate the
reset case from the restore case using the iidr value.

Let's get rid of that call.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1511883692-11511-2-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the ZynqMP QSPI (consisting of the Generic QSPI and Legacy
QSPI) and connect Numonyx n25q512a11 flashes to it.
Signed-off-by: NFrancisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20171126231634.9531-14-frasse.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the Zynq Ultrascale MPSoc Generic QSPI.
Signed-off-by: NFrancisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20171126231634.9531-13-frasse.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>