- 30 7月, 2011 10 次提交
-
-
由 Peter Maydell 提交于
Writing to a NAND device cannot set bits, it can only clear them; implement this rather than simply copying the data. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Juha Riihimäki 提交于
After receiving READ STATUS command all subsequent IO reads should return the status register value until another command is issued. Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: NRiku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Juha Riihimäki 提交于
Support NAND devices which are wider than 8 bits. Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: NRiku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Andrzej Zaborowski 提交于
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Juha Riihimäki 提交于
Add support for NAND devices of over 1Gb. Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: NRiku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Peter Maydell 提交于
Pass the BlockDeviceState to the nand_init() function rather than having it look it up via drive_get() itself. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Peter Maydell 提交于
Since lm832x has been qdev'ified, its users will generally have a DeviceState pointer rather than an i2c_slave pointer, so adjust lm832x_key_event's prototype to suit. This allows the n810 (its only user) to actually pass a correct pointer to it rather than NULL. The effect is that we no longer segfault when a key is pressed. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Juha Riihimäki 提交于
Convert the OMAP GPIO module to qdev. Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: NRiku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Peter Maydell 提交于
The OMAP2430 has a fifth GPIO module which earlier OMAP2 models lack; add the clock definition for it. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Juha Riihimäki 提交于
Add helper function omap_l4_region_base() to return the base address of a particular region of an L4 target agent. Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: NRiku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
- 29 7月, 2011 30 次提交
-
-
由 Anthony Liguori 提交于
-
由 Anthony Liguori 提交于
-
由 Anthony Liguori 提交于
-
由 Anthony Liguori 提交于
-
由 TeLeMan 提交于
The breakage was introduced by the commit 13661089Signed-off-by: NTeLeMan <geleman@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
This allows to specify -machine options without setting an explicit machine type. We will pick the default machine in this case. Requesting the list of available machines is still possible via '-machine ?' e.g. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
It's already allowed by the example; there are about 1800 instances in the tree; and disallowing it would lead to if (a) { ... } else { if (b) { ... } else { if (c) { ... } else { if (d) { ... } else { ... } } } } instead of if (a) { ... } else if (b) { ... } else if (c) { ... } else if (d) { ... } else { ... } which is more readable. Acked-by: NBlue Swirl <blauwirbel@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Berger 提交于
This patch fixes a compilation error in xen-mapcache.c . /home/stefanb/qemu/qemu-git/xen-mapcache.c: In function ‘xen_ram_addr_from_mapcache’: /home/stefanb/qemu/qemu-git/xen-mapcache.c:240:42: error: variable ‘pentry’ set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Göran Weinholt 提交于
Multiboot images can specify a bss segment. The boot loader must clear the memory of the bss and ensure that no modules or structures are allocated inside it. Several fields are provided in the Multiboot header that were previously not used properly. The header is now used to determine how much data should be read from the image and how much memory should be reserved to the bss segment. Signed-off-by: NGöran Weinholt <goran@weinholt.se> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Alon Levy 提交于
This is required for building libcacard which doesn't itself require zlib without bringing in this requirement to the build environment. Signed-off-by: NAlon Levy <alevy@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jes Sorensen 提交于
Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Dr. David Alan Gilbert 提交于
When writing the last sector of an SD card using WRITE_MULTIPLE_BLOCK QEmu throws an error saying that we've run off the end, and leaves itself in the wrong state. Tested on ARM Vexpress model. Signed-off-by: NDr. David Alan Gilbert <david.gilbert@linaro.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
This is just code movement, and moving the fpu/ include path from target-dependent to target-independent Make variables. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Most definitions in softfloat.h are really target-independent, but the file is not because it includes definitions of the default NaN values. Change those to variables to allow including softfloat.h from files that are not compiled per-target. By making them const, the compiler is allowed to optimize them into softfloat functions that use them. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
This is not a CPU interface, and a configure test would not be too precise. So just add it to qemu-common.h. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 wayne 提交于
Added options to let qemu transfer two configuration files to bios: "bootsplash.bmp" and "etc/boot-menu-wait", which could be specified by command -boot splash=P,splash-time=T P is jpg/bmp file name or an absolute path, T have a max value of 0xffff, unit is ms. With these two options, if user invoke qemu with menu=on option, then a splash picture would be showed in a given time. For example: qemu -boot menu=on,splash=/root/boot.bmp,splash-time=5000 would make boot.bmp shown as a brand with 5 seconds in the booting up process. This feature need the new seabios's support, which could be got from git. Signed-off-by: NWayne Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Allow registering sysbus device memory using a MemoryRegion. Once all users are converted, sysbus_init_mmio() and sysbus_init_mmio_cb() will be removed. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Allow registering a BAR using a MemoryRegion. Once all users are converted, pci_register_bar() and pci_register_bar_simple() will be removed. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
This is now done sloppily, via get_system_memory(). Eventually callers will be converted to stop using that. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
While eventually this should come from the machine initialization function, take a short cut to avoid converting all machines now. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
The I/O port space is byte addressable, even for word and long accesses. An example is the VMware svga card, which has long ports on offsets 0, 1, and 2. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Allocate the root memory region and initialize it. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Allow changes to the memory hierarchy to be accumulated and made visible all at once. This reduces computational effort, especially when an accelerator (e.g. kvm) is involved. Useful when a single register update causes multiple changes to an address space. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Instead of adding and deleting regions in one pass, do a delete pass followed by an add pass. This fixes the following case: from: 0x0000-0x0fff ram (a1) 0x1000-0x1fff mmio (a2) 0x2000-0x2fff ram (a3) to: 0x0000-0x2fff ram (b1) The single pass algorithm removed a1, added b2, then removed a2 and a3, which caused the wrong memory map to be built. The two pass algorithm removes a1, a2, and a3, then adds b1. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
As with the rest of the memory API, the caller associates an eventfd with an address, and the memory API takes care of registering or unregistering when the address is made visible or invisible to the guest. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
This eases the transition to the new API. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-