At the moment, when irqfd is in use but a vector is masked,
qemu will poll it and handle vector masks in userspace.
Since almost no one ever looks at the pending bits,
it is better to defer this until pending bits
are actually read.
Implement this optimization using the new poll notifier.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Update all users.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Move bindings from opaque to DeviceState.
This gives us better type safety with no performance cost.
Add macros to make future QOM work easier.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

update all users so we can remove the makefile hack.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

For the virtio-blk device (via virtio-pci) the property "config-wce" is
defined in two places.  First, it's defined from the
DEFINE_VIRTIO_BLK_FEATURES macro, second it's defined directly in
virtio-pci, just two lines above the call to that macro.

The direct definition in virtio-pci.c is broken, since it operates on the
'config_wce' field of VirtIOBlkConf, which is never used anywhere else.
Therefore, this patch removes both the extra property definition and the
redundant field it works on.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Paul 'Rusty' Russell <rusty@rustcorp.com.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This allows you to specify:

  $ qemu -device virtio-rng-pci

And things will Just Work with a reasonable default.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This adds parameters to virtio-rng-pci to allow rate limiting the entropy a
guest receives.  An example command line:

$ qemu -device virtio-rng-pci,max-bytes=1024,period=1000

Would limit entropy collection to 1Kb/s.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The Linux kernel already has a virtio-rng driver, this is the device
implementation.

When the guest asks for entropy from the virtio hwrng, it puts a buffer
in the vq.  We then put entropy into that buffer, and push it back to
the guest.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
---
aliguori: converted to new RngBackend interface
aliguori: remove entropy needed event
aliguori: fix migration

Signed-off-by: NAlexander Graf <agraf@suse.de>

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific).  Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

  git rebase -i --exec 'find -name "*.[ch]"
                        | xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

No need to expose the fd-based interface, everyone will already be fine
with the more handy EventNotifier variant. Rename the latter to clarify
that we are still talking about irqfds here.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The facility to use/unuse vectors dynamically is helpful
for virtio but little else: everyone just seems to use
vectors in their init function.

Avoid clearing msix vector use info on reset and load.
For virtio, clear it explicitly.
This should fix regressions reported with ivshmem - though
I didn't test this, I verified that virtio keeps
working like it did.
Tested-by: NCam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QEMU has a policy of keeping a stable guest device ABI.  When new guest device
features are introduced they must not change hardware info seen by existing
guests.  This is important because operating systems or applications may
"fingerprint" the hardware and refuse to run when the hardware changes.  To
always get the latest guest device ABI, run with x86 machine type "pc".

This patch hides the new VIRTIO_BLK_F_CONFIG_WCE virtio feature bit from
existing machine types.  Only pc-1.2 and later will expose this feature
by default.

For more info on the VIRTIO_BLK_F_CONFIG_WCE feature bit, see:

  commit 13e3dce0
  Author: Paolo Bonzini <pbonzini@redhat.com>
  Date:   Thu Aug 9 16:07:19 2012 +0200

      virtio-blk: support VIRTIO_BLK_F_CONFIG_WCE

      Also rename VIRTIO_BLK_F_WCACHE to VIRTIO_BLK_F_WCE for consistency with
      the spec.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Anthony Liguori <aliguori@us.ibm.com> reported:

  This broke qemu-test because it changed the pc-1.0 machine type:

  Setting guest RANDOM seed to 47167
  *** Running tests ***
  Running test /tests/finger-print.sh...		OK
  --- fingerprints/pc-1.0.x86_64	2011-12-18 13:08:40.000000000 -0600
  +++ fingerprint.txt	2012-08-12 13:30:48.000000000 -0500
  @@ -55,7 +55,7 @@
   /sys/bus/pci/devices/0000:00:06.0/subsystem_device=0x0002
   /sys/bus/pci/devices/0000:00:06.0/class=0x010000
   /sys/bus/pci/devices/0000:00:06.0/revision=0x00
  -/sys/bus/pci/devices/0000:00:06.0/virtio/host-features=0x710006d4
  +/sys/bus/pci/devices/0000:00:06.0/virtio/host-features=0x71000ed4
   /sys/class/dmi/id/bios_vendor=Bochs
   /sys/class/dmi/id/bios_date=01/01/2007
   /sys/class/dmi/id/bios_version=Bochs
  Guest fingerprint changed for pc-1.0!
Reported-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Decouple another x86-specific assumption about what irqchips imply.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Commit b1f416aa breaks vhost_net
because it always registers the virtio_pci_host_notifier_read() handler
function on the ioeventfd, even when vhost_net.ko is using the ioeventfd.
The result is both QEMU and vhost_net.ko polling on the same eventfd
and the virtio_net.ko guest driver seeing inconsistent results:

  # ifconfig eth0 192.168.0.1 netmask 255.255.255.0
  virtio_net virtio0: output:id 0 is not a head!

To fix this, proceed the same as we do for irqfd: add a parameter to
virtio_queue_set_host_notifier_fd_handler and in that case only set
the notifier, not the handler.

Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While virtio-scsi does support multiqueue, the default number of
interrupt vectors is not enough to actually enable usage of
multiple queues in the driver; this is because with only 2
vectors the driver will not be able to use a separate
interrupt for each request queue.  Derive the desired number
of vectors from the number of request queues.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Probably due to bad merge months ago, virtio-scsi-pci did not have
ioeventfd support.  Fix this and enable it by default, as is the
case for other virtio-pci devices.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Geometry needs to be qdev properties, because it belongs to the
disk's guest part.

Maintain backward compatibility exactly like for serial: fall back to
DriveInfo's geometry, set with -drive cyls=...

Bonus: info qtree now shows the geometry.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

All transports can use the same event handler for the irqfd, though the
exact mechanics of the assignment will be specific.  Note that there
are three states: handled by the kernel, handled in userspace, disabled.

This also lets virtio use event_notifier_set_handler.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

All transports can use the same event handler for the ioeventfd, though
the exact setup (address/memory region) will be specific.

This lets virtio use event_notifier_set_handler.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Under Win32, EventNotifiers will not have event_notifier_get_fd, so we
cannot call it in common code such as hw/virtio-pci.c.  Pass a pointer to
the notifier, and only retrieve the file descriptor in kvm-specific code.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Not a single driver has any possibility of failure on their
exit function, let's keep it that way.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Simple conversion.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Also this functions is better invoked by the core than by each and every
device. This allows to drop the config_write callbacks from ich and
intel-hda.

CC: Alexander Graf <agraf@suse.de>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

There is no point in pushing this burden to the devices, they tend to
forget to call them (like intel-hda, ahci, xhci did). Instead, reset
functions are now called from pci_device_reset. They do nothing if
MSI/MSI-X is not in use.

CC: Alexander Graf <agraf@suse.de>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

VIRTIO_BLK_F_SCSI is supposed to mean whether the host can *parse*
SCSI requests, not *execute* them.  You could run QEMU with scsi=on
and a file-backed disk, and QEMU would fail all SCSI requests even
though it advertises VIRTIO_BLK_F_SCSI.

Because we need to do this to fix a migration compatibility problem
related to how QEMU is invoked by management, we must do this
unconditionally even on older machine types.  This more or less assumes
that no one ever invoked QEMU with scsi=off.

Here is how testing goes:

- old QEMU, scsi=on -> new QEMU, scsi=on
- new QEMU, scsi=on -> old QEMU, scsi=on
- old QEMU, scsi=off -> new QEMU, scsi=on
- new QEMU, scsi=off -> old QEMU, scsi=on
        ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine)

- old QEMU, scsi=off -> new QEMU, scsi=off
        ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine)

- old QEMU, scsi=on -> new QEMU, scsi=off
        ok, bug fixed

- new QEMU, scsi=on -> old QEMU, scsi=off
        doesn't work (same as: old QEMU, scsi=on -> old QEMU, scsi=off)

- new QEMU, scsi=off -> old QEMU, scsi=off
        broken by the patch
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We will have to add another field to the virtio-blk configuration in
the next patch.  Avoid a proliferation of arguments to virtio_blk_init.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move it from virtio_blk_exit_pci to virtio_blk_exit.

This is included here because the next patch removes proxy->block.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make use of the new vector notifier to track changes of the MSI-X
configuration of virtio PCI devices. On enabling events, we establish
the required virtual IRQ to MSI-X message route and link the signaling
eventfd file descriptor to this vIRQ line. That way, vhost-generated
interrupts can be directly delivered to an in-kernel MSI-X consumer like
the x86 APIC.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

There are no outside references to virtio_portio.
Add missing 'static' specifier.
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Currently the virtio balloon device, when using the virtio-pci interface
advertises itself with PCI class code MEMORY_RAM.  This is wrong; the
balloon is vaguely related to memory, but is nothing like a PCI memory
device in the meaning of the class code, and this code is not required
or suggested by the virtio PCI specification.

Worse, this patch causes problems on the pseries machine, because the
firmware, seeing this class code, advertises the device as memory in the
device tree, and then a guest kernel bug causes it to see this "memory"
before the real system memory, leading to a crash in early boot.

This patch fixes the problem by removing the bogus PCI class code on the
balloon device.  The backwards compatibility PC machines get new compat
properties so that they don't change.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add a useless virtio SCSI HBA device:

  qemu -device virtio-scsi-pci
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Replace device_init() with generalized type_init().

While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Limit them to the device_add functionality.  Device aliases were a hack based
on the fact that virtio was modeled the wrong way.  The mechanism for aliasing
is very limited in that only one alias can exist for any device.

We have to support it for the purposes of compatibility but we only need to
support it in device_add so restrict it to that piece of code.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
 - Use a table for aliases (Paolo)

This was done in a mostly automated fashion.  I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.

The first step was a sed-based addition of the parent type to the subclass
registration functions.

The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.

Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.

We are almost fully converted to QOM after this commit.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These are various small stylistic changes which help make things more
consistent such that the automated conversion script can be simpler.

It's not necessary to agree or disagree with these style changes because all
of this code is going to be rewritten by the patch monkey script anyway.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>