Signed-off-by: NHani Benhabiles <kroosec@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When this flag is set, the server tells the client that it can send another
option if the server received a request with an option that it doesn't
understand instead of directly closing the connection.

Also add link to the most up-to-date documentation.
Signed-off-by: NHani Benhabiles <kroosec@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These values aren't used in this case.

Currently, the from field in the request sent by the nbd kernel module leading
to a false error message when ending the connection with the client.

$ qemu-nbd some.img -v
// After nbd-client -d /dev/nbd0
nbd.c:nbd_trip():L1031: From: 18446744073709551104, Len: 0, Size: 20971520,
Offset: 0
nbd.c:nbd_trip():L1032: requested operation past EOF--bad client?
nbd.c:nbd_receive_request():L638: read failed
Signed-off-by: NHani Benhabiles <kroosec@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NHani Benhabiles <hani@linux.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

qemu-nbd is one of the few valid users of qerror_report_err.  Move
the error-reporting socket wrappers there.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Before:
    $ ./qemu-io-old
    qemu-io-old> open -r -o file.driver=nbd
    one of path and host must be specified.
    qemu-io-old: can't open device (null): Could not open image: Invalid argument
    $ ./qemu-io-old
    qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
    path and host may not be used at the same time.
    qemu-io-old: can't open device (null): Could not open image: Invalid argument

After:
    $ ./qemu-io
    qemu-io> open -r -o file.driver=nbd
    qemu-io: can't open device (null): one of path and host must be specified.
    $ ./qemu-io
    qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
    qemu-io: can't open device (null): path and host may not be used at the same time.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The caller might handle non-blocking using coroutine. Leave the choice
to the caller to use a blocking or non-blocking negotiate.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Previously, nbd calls drive_get_ref() on the drive of bs. A BDS doesn't
always have associated dinfo, which nbd doesn't care either. We already
have BDS ref count, so use it to make it safe for a BDS w/o blockdev.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.
Signed-off-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The Linux nbd driver recently increased the maximum supported request
size up to 32 MB:

  commit 078be02b80359a541928c899c2631f39628f56df
  Author: Michal Belczyk <belczyk@bsd.krakow.pl>
  Date:   Tue Apr 30 15:28:28 2013 -0700

      nbd: increase default and max request sizes

      Raise the default max request size for nbd to 128KB (from 127KB) to get it
      4KB aligned.  This patch also allows the max request size to be increased
      (via /sys/block/nbd<x>/queue/max_sectors_kb) to 32MB.

QEMU's 1 MB buffers are too small to handle these requests.

This patch allocates data buffers dynamically and allows up to 32 MB per
request.
Reported-by: NNick Thomas <nick@bytemark.co.uk>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use GLib's efficient slice allocator instead of open-coding the request
freelist.  This patch simplifies the NBDRequest code.

Now we qemu_blockalign() the req->data buffer each time but the next
patch switches from a fixed size buffer to a dynamic size anyway.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

The NBD block supports an URL syntax, for which a URL parser returns
separate hostname and port fields. It also supports the traditional qemu
syntax encoded in a filename. Until now, after parsing the URL to get
each piece of information, a new string is built to be fed to socket
functions.

Instead of building a string in the URL case that is immediately parsed
again, parse the string in both cases and use the QemuOpts interface to
qemu-sockets.c.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reported-by: NMichal Privoznik <mprivoznik@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We do not need BLKROSET if the kernel supports setting flags.
Also, always do BLKROSET even for a read-write export, otherwise
the read-only state remains "sticky" after the invocation of
"qemu-nbd -r".
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Before:

    $ qemu-system-x86_64 nbd:localhost:12345
    inet_connect_opts: connect(ipv4,yakj.usersys.redhat.com,127.0.0.1,12345): Connection refused
    qemu-system-x86_64: could not open disk image nbd:localhost:12345: Connection refused

After:

    $ x86_64-softmmu/qemu-system-x86_64 nbd:localhost:12345
    qemu-system-x86_64: Failed to connect to socket: Connection refused
    qemu-system-x86_64: could not open disk image nbd:localhost:12345: Connection refused
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This lets me adjust the clients to do proper error propagation first,
thus avoiding temporary regressions in the quality of the error messages.
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No need to add non blocking parameters to the blocking inet_connect
add block parameter for inet_connect_opts instead of using QemuOpt "block".
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Allow negotiation to receive the name of the requested export from
the client.  Passing a NULL export to nbd_client_new will cause
the server to send the extended negotiation header.  The exp field
is then filled during negotiation.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add an API to register and find named exports.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In order to exit cleanly from qemu-nbd, add a callback that triggers
when an NBDExport is closed.  In the case of qemu-nbd it will exit the
main loop.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Track the NBDClients of each NBDExport, and use it to implement
nbd_export_close.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We will use a similar two-phase destruction for NBDExport, so we need
each NBDClient to add a reference to NBDExport.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Because nbd_client_close removes the I/O handlers for the client
socket, there is no way that any suspended coroutines are restarted.
This will be a problem with the QEMU embedded NBD server, because
we will have a QMP command to forcibly close all connections with
the clients.

Instead, we can exploit the reference counting of NBDClients; shutdown the
client socket, which will make it readable and writeable.  Also call the
close callback, which will release the user's reference.  The coroutines
then will fail and exit cleanly, and release all remaining references,
until the last refcount finally triggers the closure of the client.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

After the next patch, the close callback will have to release its
reference.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is not desirable when embedding the NBD server inside QEMU.
Move the bdrv_close to qemu-nbd.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We will need the NBDClient in nbd_send_negotiate to store the
export requested by the client.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Avoid magic numbers and magic size computations; hide them behind
constants.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's used to indicate the special case where a valid file-descriptor
is returned (ie. success) but the connection can't be completed
w/o blocking.

This is needed because QERR_SOCKET_CONNECT_IN_PROGRESS is not
treated like an error and a future commit will drop it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Add a new argument in inet_listen()/inet_listen_opts()
to pass back listen error.

Change nbd, qemu-char, vnc to use new interface.
Signed-off-by: NAmos Kong <akong@redhat.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a bool argument to inet_connect() to assign if set socket
to block/nonblock, and delete original argument 'socktype'
that is unused.
Add a new argument to inet_connect()/inet_connect_opts(),
to pass back connect error by error class.

Retry to connect when -EINTR is got. Connect's successful
for nonblock socket when following errors are got, user
should wait for connecting by select():
  -EINPROGRESS
  -EWOULDBLOCK (win32)
  -WSAEALREADY (win32)

Change nbd, vnc to use new interface.
Signed-off-by: NAmos Kong <akong@redhat.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Right now, nbd_wr_sync will hang if no data at all is available on the
socket and the other side is not going to provide any.  Relax this by
making it loop only for writes or partial reads.  This fixes a race
where one thread is executing qemu_aio_wait() and another is executing
main_loop_wait().  Then, the select() call in main_loop_wait() can return
stale data and call the "readable" callback with no data in the socket.
Reported-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In the next patch we need to look at the return code of nbd_wr_sync.
To avoid percolating the socket_error() ugliness all around, let's
handle errors by returning negative errno values.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>