So drivers can clear their mem io table entries on exit back to unassigned
state.

Also make the io mem index allocation dynamic.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6601 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6531 c046a42c-6fe2-441c-8c8c-71466251a162

Original idea&code by Kevin Wolf, split-up in two patches and added more
archs.

This patch introduces a flag to log CPU resets. Useful for tracing
unexpected resets (such as those triggered by x86 triple faults).
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6452 c046a42c-6fe2-441c-8c8c-71466251a162

The target memory mapping API may fail if the bounce buffer resources
are exhausted.  Add a notification mechanism to allow clients to retry
the mapping operation when resources become available again.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6395 c046a42c-6fe2-441c-8c8c-71466251a162

Devices accessing large amounts of memory (as with DMA) will wish to obtain
a pointer to guest memory rather than access it indirectly via
cpu_physical_memory_rw().  Add a new API to convert target addresses to
host pointers.

In case the target address does not correspond to RAM, a bounce buffer is
allocated.  To prevent the guest from causing the host to allocate unbounded
amounts of bounce buffer, this memory is limited (currently to one page).
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6394 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6339 c046a42c-6fe2-441c-8c8c-71466251a162

This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162

Latest changes to the cpu_breakpoint/watchpoint API broke cpu_copy. This
patch fixes it by cloning the breakpoint and watchpoint lists
appropriately.

Thanks to Lionel Landwerlin for pointing out.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6321 c046a42c-6fe2-441c-8c8c-71466251a162

The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: NStuart Brady <stuart.brady@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6140 c046a42c-6fe2-441c-8c8c-71466251a162

MMIO exits are more expensive in KVM or Xen than in QEMU because they 
involve, at least, privilege transitions.  However, MMIO write 
operations can be effectively batched if those writes do not have side 
effects.

Good examples of this include VGA pixel operations when in a planar 
mode.  As it turns out, we can get a nice boost in other areas too.  
Laurent mentioned a 9.7% performance boost in iperf with the coalesced 
MMIO changes for the e1000 when he originally posted this work for KVM.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5961 c046a42c-6fe2-441c-8c8c-71466251a162

Paul's comment on my first approach to fix the h2g usage in
page_find_alloc finally open my eyes about what the code is actually
supposed to do:

With the help of h2g_valid we can no cleanly check if a freshly allocate
page (for host usage) is guest-reachable and, in case it is, mark it
reserved in the guest's address range.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5957 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5852 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5846 c046a42c-6fe2-441c-8c8c-71466251a162

Unfortunately this range is so narrow that I'm not sure if it makes more
sense to always use memory load to pc kind of branch instead.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5844 c046a42c-6fe2-441c-8c8c-71466251a162

This switches cpu_break/watchpoint_* to TAILQ wrappers, simplifying the
code and also fixing a use after release issue in
cpu_break/watchpoint_remove_all.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5799 c046a42c-6fe2-441c-8c8c-71466251a162

Hypervisors like KVM perform badly while doing mmio on
a loop, because it'll generate an exit on each access.
This is the case with VGA, which results in very bad
performance.

In this patch, we map the linear frame buffer as RAM,
make sure it has dirty region tracking enabled, and then
just let the region to be written.

Cleanups suggestions by:
  Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5793 c046a42c-6fe2-441c-8c8c-71466251a162

ENOBUFS is not defined on Win32.  Use ENOMEM instead which is more portable.

This was reported by Hervé Poussineau.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5749 c046a42c-6fe2-441c-8c8c-71466251a162

Add another breakpoint/watchpoint type to BP_GDB: BP_CPU. This type is
intended for hardware-assisted break/watchpoint emulations like the x86
architecture requires.

To keep the highest priority for BP_GDB breakpoints, this type is
always inserted at the head of break/watchpoint lists, thus is found
first when looking up the origin of a debug interruption.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5746 c046a42c-6fe2-441c-8c8c-71466251a162

When one watchpoint is hit, others might have triggered as well. To
support users of the watchpoint API which need to detect such cases,
the BP_WATCHPOINT_HIT flag is introduced and maintained.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5744 c046a42c-6fe2-441c-8c8c-71466251a162

Now that we can properly restore the pc on watchpoint hits, there is no
more need for prematurely terminating TBs if watchpoints are present.
Remove all related bits.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5742 c046a42c-6fe2-441c-8c8c-71466251a162

In order to provide accurate information about the triggering
instruction, this patch adds the required bits to restore the pc if the
access happened inside a TB. With the BP_STOP_BEFORE_ACCESS flag, the
watchpoint user can control if the debug trap should be issued on or
after the accessing instruction.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5741 c046a42c-6fe2-441c-8c8c-71466251a162

This adds length support for watchpoints. To keep things simple, only
aligned watchpoints are accepted.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5740 c046a42c-6fe2-441c-8c8c-71466251a162

This patch prepares the QEMU cpu_watchpoint/breakpoint API to allow the
succeeding enhancements this series comes with.

First of all, it overcomes MAX_BREAKPOINTS/MAX_WATCHPOINTS by switching
to dynamically allocated data structures that are kept in linked lists.
This also allows to return a stable reference to the related objects,
required for later introduced x86 debug register support.

Breakpoints and watchpoints are stored with their full information set
and an additional flag field that makes them easily extensible for use
beyond pure guest debugging.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5738 c046a42c-6fe2-441c-8c8c-71466251a162

This patch refactors the way the CPU state is handled that is associated
with a TB. The basic motivation is to move more arch specific code out
of generic files. Specifically the long #ifdef clutter in tb_find_fast()
has to be overcome in order to avoid duplicating it for the gdb
watchpoint fixes (patch "Restore pc on watchpoint hits").
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5736 c046a42c-6fe2-441c-8c8c-71466251a162

Unfortunately, -linux-user doesn't use osdep as it replaces some of those
functions with specific ones.  The code #ifdef code in exec.c needs to
remain in place so instead of introducing a qemu_getpagesize() let's just
use getpagesize() in the non-Windows implementation of qemu_vmalloc.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5703 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5701 c046a42c-6fe2-441c-8c8c-71466251a162

Attached patch fixes some warnings which only happen on Windows.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5639 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds very basic KVM support.  KVM is a kernel module for Linux that
allows userspace programs to make use of hardware virtualization support.  It
current supports x86 hardware virtualization using Intel VT-x or AMD-V.  It
also supports IA64 VT-i, PPC 440, and S390.

This patch only implements the bare minimum support to get a guest booting.  It
has very little impact the rest of QEMU and attempts to integrate nicely with
the rest of QEMU.

Even though this implementation is basic, it is significantly faster than TCG.
Booting and shutting down a Linux guest:

w/TCG:  1:32.36 elapsed  84% CPU

w/KVM:  0:31.14 elapsed  59% CPU

Right now, KVM is disabled by default and must be explicitly enabled with
 -enable-kvm.  We can enable it by default later when we have had better
testing.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5627 c046a42c-6fe2-441c-8c8c-71466251a162

Move up the warp around test because line
'end = TARGET_PAGE_ALIGN(start+len);'
can interfere with it.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5563 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5436 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds a dirty tracking bit for live migration.  We use 0x08 because
kqemu uses 0x04.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5433 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5420 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5415 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5397 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5392 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NJuergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5331 c046a42c-6fe2-441c-8c8c-71466251a162

Don't truncate code_gen_buffer_size calculation to int, as it will give
unpredicted results on 64 bit systems when booting large guests.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5310 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5275 c046a42c-6fe2-441c-8c8c-71466251a162