- 27 4月, 2012 3 次提交
-
-
由 Stefan Hajnoczi 提交于
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Stefan Hajnoczi 提交于
There are at least two different errors that can occur in block_job_set_speed(): the job might not support setting speeds or the value might be invalid. Use the Error mechanism to report the error where it occurs. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Stefan Hajnoczi 提交于
The block job API uses -errno return values internally and we convert these to Error in the QMP functions. This is ugly because the Error should be created at the point where we still have all the relevant information. More importantly, it is hard to add new error cases to this case since we quickly run out of -errno values without losing information. Go ahead and use Error directly and don't convert later. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 20 4月, 2012 1 次提交
-
-
由 Kevin Wolf 提交于
This adds the basic infrastructure to qcow2 to handle version 3 images. It includes code to create v3 images, allow header updates for v3 images and checks feature bits. It still misses support for zero clusters, so this is not a fully compliant implementation of v3 yet. The default for creating new images stays at v2 for now. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 05 4月, 2012 3 次提交
-
-
由 Paolo Bonzini 提交于
I am not sure that these are really proper GtkDoc, but they follow the existing documentation in block_int.h. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Streaming can issue I/O while qcow2_close is running. This causes the L2 caches to become very confused or, alternatively, could cause a segfault when the streaming coroutine is reentered after closing its block device. The fix is to cancel streaming jobs when closing their underlying device. The cancellation must be synchronous, on the other hand qemu_aio_wait will not restart a coroutine that is sleeping in co_sleep. So add a flag saying whether streaming has in-flight I/O. If the busy flag is false, the coroutine is quiescent and, when cancelled, will not issue any new I/O. This protects streaming against closing, but not against deleting. We have a reference count protecting us against concurrent deletion, but I still added an assertion to ensure nothing bad happens. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
And remove several block_int.h inclusions that should not be there. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 29 2月, 2012 3 次提交
-
-
由 Jeff Cody 提交于
This is a QAPI/QMP only command to take a snapshot of a group of devices. This is similar to the blockdev-snapshot-sync command, except blockdev-group-snapshot-sync accepts a list devices, filenames, and formats. It is attempted to keep the snapshot of the group atomic; if the creation or open of any of the new snapshots fails, then all of the new snapshots are abandoned, and the name of the snapshot image that failed is returned. The failure case should not interrupt any operations. Rather than use bdrv_close() along with a subsequent bdrv_open() to perform the pivot, the original image is never closed and the new image is placed 'in front' of the original image via manipulation of the BlockDriverState fields. Thus, once the new snapshot image has been successfully created, there are no more failure points before pivoting to the new snapshot. This allows the group of disks to remain consistent with each other, even across snapshot failures. Signed-off-by: NJeff Cody <jcody@redhat.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
These were never used. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
sync_aiocb is unused since commit ce1a14dc (Dynamically allocate AIO Completion Blocks., 2006-08-07). private is unused since commit 56a14938 (drive cleanup fixes., 2009-09-25). Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 23 2月, 2012 1 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Acked-by: NKevin Wolf <kwolf@redhat.com>
-
- 09 2月, 2012 1 次提交
-
-
由 Stefan Hajnoczi 提交于
The ability to zero regions of an image file is a useful primitive for higher-level features such as image streaming or zero write detection. Image formats may support an optimized metadata representation instead of writing zeroes into the image file. This allows zero writes to be potentially faster than regular write operations and also preserve sparseness of the image file. The .bdrv_co_write_zeroes() interface should be implemented by block drivers that wish to provide efficient zeroing. Note that this operation is different from the discard operation, which may leave the contents of the region indeterminate. That means discarded blocks are not guaranteed to contain zeroes and may contain junk data instead. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 26 1月, 2012 4 次提交
-
-
由 Marcelo Tosatti 提交于
Add support for streaming data from an intermediate section of the image chain (see patch and documentation for details). Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Previously copy-on-read could only be enabled for all requests to a block device. This means requests coming from the guest as well as QEMU's internal requests would perform copy-on-read when enabled. For image streaming we want to support finer-grained behavior than just populating the image file from its backing image. Image streaming supports partial streaming where a common backing image is preserved. In this case guest requests should not perform copy-on-read because they would indiscriminately copy data which should be left in a backing image from the backing chain. Introduce a per-request flag for copy-on-read so that a block device can process both regular and copy-on-read requests. Overlapping reads and writes still need to be serialized for correctness when copy-on-read is happening, so add an in-flight reference count to track this. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 05 12月, 2011 6 次提交
-
-
由 Stefan Hajnoczi 提交于
The bdrv_enable_copy_on_read()/bdrv_disable_copy_on_read() functions can be used to programmatically enable or disable copy-on-read for a block device. Later patches add the actual copy-on-read logic. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
The block layer does not know about pending requests. This information is necessary for copy-on-read since overlapping requests must be serialized to prevent races that corrupt the image. The BlockDriverState gets a new tracked_request list field which contains all pending requests. Each request is a BdrvTrackedRequest record with sector_num, nb_sectors, and is_write fields. Note that request tracking is always enabled but hopefully this extra work is so small that it doesn't justify adding an enable/disable flag. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Now that all block drivers have been converted to .bdrv_co_is_allocated() we can drop .bdrv_is_allocated(). Note that the public bdrv_is_allocated() interface is still available but is in fact a synchronous wrapper around .bdrv_co_is_allocated(). Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
This patch adds the .bdrv_co_is_allocated() interface which is identical to .bdrv_is_allocated() but runs in coroutine context. Running in coroutine context implies that other coroutines might be performing I/O at the same time. Therefore it must be safe to run while the following BlockDriver functions are in-flight: .bdrv_co_readv() .bdrv_co_writev() .bdrv_co_flush() .bdrv_co_is_allocated() The new .bdrv_co_is_allocated() interface is useful because it can be used when a VM is running, whereas .bdrv_is_allocated() is a synchronous interface that does not cope with parallel requests. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Zhi Yong Wu 提交于
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Zhi Yong Wu 提交于
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 22 11月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
Image files have two types of data: immutable data that describes things like image size, backing files, etc. and mutable data that includes offset and reference count tables. Today, image formats aggressively cache mutable data to improve performance. In some cases, this happens before a guest even starts. When dealing with live migration, since a file is open on two machines, the caching of meta data can lead to data corruption. This patch addresses this by introducing a mechanism to invalidate any cached mutable data a block driver may have which is then used by the live migration code. NB, this still requires coherent shared storage. Addressing migration without coherent shared storage (i.e. NFS) requires additional work. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 11月, 2011 2 次提交
-
-
由 Kevin Wolf 提交于
qcow2 has a writeback metadata cache, so flushing a qcow2 image actually consists of writing back that cache to the protocol and only then flushes the protocol in order to get everything stable on disk. This introduces a separate bdrv_co_flush_to_os to reflect the split. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
There are two different types of flush that you can do: Flushing one level up to the OS (i.e. writing data to the host page cache) or flushing it all the way down to the disk. The existing functions flush to the disk, reflect this in the function name. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 27 10月, 2011 2 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
A future commit will convert bdrv_info() to the QAPI and it won't provide IOS_INVAL. Luckily all we have to do is to add a new 'iostatus_enabled' member to BlockDriverState and use it instead. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 21 10月, 2011 4 次提交
-
-
由 Paolo Bonzini 提交于
Since coroutine operation is now mandatory, convert both bdrv_discard implementations to coroutines. For qcow2, this means taking the lock around the operation. raw-posix remains synchronous. The bdrv_discard callback is then unused and can be eliminated. Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Since coroutine operation is now mandatory, convert all bdrv_flush implementations to coroutines. For qcow2, this means taking the lock. Other implementations are simpler and just forward bdrv_flush to the underlying protocol, so they can avoid the lock. The bdrv_flush callback is then unused and can be eliminated. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This similarly adds support for coroutine and asynchronous discard. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Add coroutine support for flush and apply the same emulation that we already do for read/write. bdrv_aio_flush is simplified to always go through a coroutine. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 11 10月, 2011 1 次提交
-
-
由 Luiz Capitulino 提交于
This commit adds support to the BlockDriverState type to keep track of devices' I/O status. There are three possible status: BDRV_IOS_OK (no error), BDRV_IOS_ENOSPC (no space error) and BDRV_IOS_FAILED (any other error). The distinction between no space and other errors is important because a management application may want to watch for no space in order to extend the space assigned to the VM and put it to run again. Qemu devices supporting the I/O status feature have to enable it explicitly by calling bdrv_iostatus_enable() _and_ have to be configured to stop the VM on errors (ie. werror=stop|enospc or rerror=stop). In case of multiple errors being triggered in sequence only the first one is stored. The I/O status is always reset to BDRV_IOS_OK when the 'cont' command is issued. Next commits will add support to some devices and extend the query-block/info block commands to return the I/O status information. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 12 9月, 2011 5 次提交
-
-
由 Markus Armbruster 提交于
It's convenience stuff for block device models, so block.h isn't the ideal home either, but better than block_int.h. Permits moving some #include "block_int.h" from device model .h into .c. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
It's a confused mess (see previous commit). No users remain. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
While there, make the locked parameter bool. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Requires new BlockDevOps member is_medium_locked(). Implement for IDE and SCSI CD-ROMs. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Commit 4be9762a is now completely redone. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 06 9月, 2011 3 次提交
-
-
由 Markus Armbruster 提交于
Device models should be able to use it without an unclean include of block_int.h. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
hw/fdc.c is the only one that cares. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Multiplexing callbacks complicates matters needlessly. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-