Prepare for making slirp/ a standalone project.

Remove some useless includes while at it.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-5-marcandre.lureau@redhat.com>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

Replace:
- u_char -> uint8_t
- u_short -> uint16_t
- u_long -> uint32_t
- u_int -> unsigned
- caddr_t -> char *
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

Except for the migration code which is gated by WITH_QEMU, only
include our own headers, so libslirp can be built standalone.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

There are not many, and they are all simple mistakes that ended up
being committed.  Remove them.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: NWainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Tracked down with an ugly, brittle and probably buggy Perl script.

Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Tested-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

qemu/osdep.h is included in some headers twice - one time
should be sufficient.
Also remove the inclusion of time.h since that is already
done by osdep.h, too (this makes scripts/clean-includes
happy again).
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Basically, this patch adds some switch in various TCP functions to
prepare them for the IPv6 case.

To have something to "switch" in tcp_input() and tcp_respond(), a new
argument is used to give them the sa_family of the addresses they are
working on.

This patch does not include the entailed reindentation, to make proofread
easier. Reindentation is adressed in the following no-op patch.
Signed-off-by: NGuillaume Subiron <maethor@subiron.org>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Disambiguation : icmp_error is renamed into icmp_send_error, since it
doesn't manage errors, but only sends ICMP Error messages.
Signed-off-by: NYann Bordenave <meow@meowstars.org>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-10-git-send-email-peter.maydell@linaro.org

Casting pointers to long won't work on 64 bit Windows.
It is not needed with the right format strings.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch cleans up return sentences in the end of void functions.
Reported-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>

Close & free sockets when shutting down a slirp instance, also release
all buffers.

CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

cppcheck detected two rather strange comments which were not
correctly written as C comments.

They did not cause any harm because they were framed by
#ifdef notdef ... #endif, so they were never compiled.

Fix them nevertheless (we could also remove the unused code).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Linux 3.0 gained support for unprivileged ICMP ping sockets. Use this
feature to forward guest pings to the outer world. The host admin has to
set the ping_group_range in order to grant access to those sockets. To
allow ping for the users group (GID 100):

echo 100 100 > /proc/sys/net/ipv4/ping_group_range
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Remove this pointless wrapping.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This aligns the code to what the documentation claims: Allow everything
but requests that would have to be routed outside of the virtual LAN.

So we need to drop the unneeded IP-level filter, allow TFTP requests,
and add the missing protocol-level filter to ICMP.

CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Packets with TTL=1 may be directed to local network (DHCP/DNS servers for example), so don't discard them
This is required by old versions of NetBSD which send DHCP DISCOVER packets with TTL=1
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

There is no need to have a second set of integral types.
Replace them by the standard types from stdint.h.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix unmatched bracket in commented out code
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The essence of this patch is to stuff (almost) all global variables of
the slirp stack into the structure Slirp. In this step, we still keep
the structure as global variable, directly accessible by the whole
stack. Changes to the external interface of slirp will be applied in
the following patches.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently, ip_id is always initialized to 0 on slirp startup (despite
the broken attempt to derive it from the clock). This is good for
reproducibility. But it is not preserved across save/restore. This patch
therefore drops the dead initialization code from ip_init and introduces
ip_id to the persistent slirp state.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As agreed on the mailing list, there is no interest in keeping the
usually disabled slirp statistics in the tree. So this patch removes
them.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

After all its years inside the qemu tree, there is no point in keeping
the dead code paths of slirp. This patch is a first round of removing
usually commented out code parts. More cleanups need to follow (and
maybe finally a proper reindention).
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The user mode IP stack is currently only minimally configurable /wrt to
its virtual IP addresses. This is unfortunate if some guest has a fixed
idea of which IP addresses to use.

Therefore this patch prepares the stack for fully configurable IP
addresses and masks. The user interface and default addresses remain
untouched in this step, they will be enhanced in the following patch.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix Sparse warnings:
 * use NULL instead of plain 0
 * rearrange header include order to avoid redefining types accidentally
 * ANSIfy SLIRP
 * avoid "restrict" keyword
 * add static



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6736 c046a42c-6fe2-441c-8c8c-71466251a162

Fix SIGSEGV crash in networking code (bug was introduced in r6288).
Thanks to Gleb Natapov for finding this fix.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6545 c046a42c-6fe2-441c-8c8c-71466251a162

According to the FSF, the 4-clause BSD license, which slirp is covered under,
is not compatible with the GPL or LGPL[1].

[1] http://www.fsf.org/licensing/licenses/index_html#GPLIncompatibleLicenses

There are three declared copyright holders in slirp that use the 4-clause
BSD license, the Regents of UC Berkley, Danny Gasparovski, and Kelly Price.
Below are the appropriate permissions to remove the advertise clause from slirp
from each party.

Special thanks go to Richard Fontana from Red Hat for contacting all of the
necessary authors to resolve this issue!

Regents of UC Berkley:
From ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change

July 22, 1999

To All Licensees, Distributors of Any Version of BSD:

As you know, certain of the Berkeley Software Distribution ("BSD") source
code files require that further distributions of products containing all or
portions of the software, acknowledge within their advertising materials
that such products contain software developed by UC Berkeley and its
contributors.

Specifically, the provision reads:

"     * 3. All advertising materials mentioning features or use of this software
      *    must display the following acknowledgement:
      *    This product includes software developed by the University of
      *    California, Berkeley and its contributors."

Effective immediately, licensees and distributors are no longer required to
include the acknowledgement within advertising materials.  Accordingly, the
foregoing paragraph of those BSD Unix files containing it is hereby deleted
in its entirety.

William Hoskins
Director, Office of Technology Licensing
University of California, Berkeley

Danny Gasparovski:

Subject: RE: Slirp license
Date: Thu, 8 Jan 2009 10:51:00 +1100
From: "Gasparovski, Daniel" <Daniel.Gasparovski@ato.gov.au>
To: "Richard Fontana" <rfontana@redhat.com>

Hi Richard,

I have no objection to having Slirp code in QEMU be licensed under the
3-clause BSD license.

Thanks for taking the effort to consult me about this.


Dan ...

Kelly Price:

Date: Thu, 8 Jan 2009 19:38:56 -0500
From: "Kelly Price" <strredwolf@gmail.com>
To: "Richard Fontana" <rfontana@redhat.com>
Subject: Re: Slirp license

Thanks for contacting me, Richard.  I'm glad you were able to find
Dan, as I've been "keeping the light on" for Slirp.  I have no use for
it now, and I have little time for it (now holding onto Keenspot's
Comic Genesis and having a regular US state government position). If
Dan would like to return to the project, I'd love to give it back to
him.

As for copyright, I don't own all of it.  Dan does, so I will defer to
him.  Any of my patches I will gladly license to the 3-part BSD
license.  My interest in re-licensing was because we didn't have ready
info to contact Dan.  If Dan would like to port Slirp back out of
QEMU, a lot of us 64-bit users would be grateful.

Feel free to share this email address with Dan.  I will be glad to
effect a transfer of the project to him and Mr. Bellard of the QEMU
project.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6451 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NGleb Natapov <gleb@redhat.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6288 c046a42c-6fe2-441c-8c8c-71466251a162

Add "slirp firewall" to permit connection only to vmchannel addresses.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6241 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3452 c046a42c-6fe2-441c-8c8c-71466251a162

Add 'info slirp' command to monitor to display statistics
Disable Slirp debugging code by default


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3451 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1880 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@733 c046a42c-6fe2-441c-8c8c-71466251a162