Commit 6f1834a2 exposed a bug in openpic_kvm where we don't filter
for memory events that only happen to the region we want to know
events about.

Add proper filtering, fixing the e500plat target with KVM.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Message-id: 1396431718-14908-1-git-send-email-agraf@suse.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/bonzini/scsi-next:
  iscsi: always query max WRITE SAME length
  iscsi: ignore flushes on scsi-generic devices
  iscsi: recognize "invalid field" ASCQ from WRITE SAME command
  scsi-bus: remove bogus assertion
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Change over to my proper Xilinx email. s/petalogix.com/xilinx.com.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: cdff0c388c70df06217c467dcfb89267b7911feb.1396506607.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Max WRITE SAME length is also used when the UNMAP bit is zero, so it
should be queried even if LBPWS=0.  Same for the optimal transfer
length.

However, the write_zeroes_alignment only matters for UNMAP=1 so we
still restrict it to LBPWS=1.
Reviewed-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Non-block SCSI devices do not support flushing, but we may still send
them requests via bdrv_flush_all.  Just ignore them.
Reviewed-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Some targets may return "invalid field" as the ASCQ from WRITE SAME
if they support the command only without the UNMAP field.  Recognize
that, and return ENOTSUP just like for "invalid operation code".
Reviewed-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This assertion is invalid, because get_sg_list can return an
empty sg-list even for commands that transfer no data (such
as SYNCHRONIZE CACHE).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Tracing pull request

# gpg: Signature made Tue 01 Apr 2014 19:08:48 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/tracing-pull-request:
  trace: add workaround for SystemTap PR13296
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

SystemTap sdt.h sometimes results in compiled probes without sufficient
information to extract arguments.  This can be solved in a slightly
hacky way by encouraging the compiler to place arguments into registers.

This patch fixes the apic_reset_irq_delivered() trace event on Fedora 20
with gcc-4.8.2-7.fc20 and systemtap-sdt-devel-2.4-2.fc20 on x86_64.
Signed-off-by: NFrank Ch. Eigler <fche@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Block pull request

# gpg: Signature made Tue 01 Apr 2014 18:11:16 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request: (51 commits)
  qcow2: link all L2 meta updates in preallocate()
  parallels: Sanity check for s->tracks (CVE-2014-0142)
  parallels: Fix catalog size integer overflow (CVE-2014-0143)
  qcow2: Limit snapshot table size
  qcow2: Check maximum L1 size in qcow2_snapshot_load_tmp() (CVE-2014-0143)
  qcow2: Fix L1 allocation size in qcow2_snapshot_load_tmp() (CVE-2014-0145)
  qcow2: Fix NULL dereference in qcow2_open() error path (CVE-2014-0146)
  qcow2: Fix copy_sectors() with VM state
  block: Limit request size (CVE-2014-0143)
  block: vdi bounds check qemu-io tests
  dmg: prevent chunk buffer overflow (CVE-2014-0145)
  dmg: use uint64_t consistently for sectors and lengths
  dmg: sanitize chunk length and sectorcount (CVE-2014-0145)
  dmg: use appropriate types when reading chunks
  dmg: drop broken bdrv_pread() loop
  dmg: prevent out-of-bounds array access on terminator
  dmg: coding style and indentation cleanup
  qcow2: Fix new L1 table size check (CVE-2014-0143)
  qcow2: Protect against some integer overflows in bdrv_check
  qcow2: Fix types in qcow2_alloc_clusters and alloc_clusters_noref
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

input bugfixes for 2.0

# gpg: Signature made Tue 01 Apr 2014 10:16:43 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-input-7:
  input: add sanity check
  input: mouse_set should check input device type.
  input: fix input_event_key_number trace event
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

preallocate() only links the first QCowL2Meta's data clusters into the
L2 table and ignores any chained QCowL2Metas in the linked list.

Chains of QCowL2Meta structs are built up when contiguous clusters span
L2 tables.  Each QCowL2Meta describes one L2 table update.  This is a
rare case in preallocate() but can happen.

This patch fixes preallocate() by iterating over the whole list of
QCowL2Metas.  Compare with the qcow2_co_writev() function's
implementation, which is similar but also also handles request
dependencies.  preallocate() only performs one allocation at a time so
there can be no dependencies.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This avoids a possible division by zero.

Convert s->tracks to unsigned as well because it feels better than
surviving just because the results of calculations with s->tracks are
converted to unsigned anyway.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The first test case would cause a huge memory allocation, leading to a
qemu abort; the second one to a too small malloc() for the catalog
(smaller than s->catalog_size), which causes a read-only out-of-bounds
array access and on big endian hosts an endianess conversion for an
undefined memory area.

The sample image used here is not an original Parallels image. It was
created using an hexeditor on the basis of the struct that qemu uses.
Good enough for trying to crash the driver, but not for ensuring
compatibility.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Even with a limit of 64k snapshots, each snapshot could have a filename
and an ID with up to 64k, which would still lead to pretty large
allocations, which could potentially lead to qemu aborting. Limit the
total size of the snapshot table to an average of 1k per entry when
the limit of 64k snapshots is fully used. This should be plenty for any
reasonable user.

This also fixes potential integer overflows of s->snapshot_size.
Suggested-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This avoids an unbounded allocation.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

For the L1 table to loaded for an internal snapshot, the code allocated
only enough memory to hold the currently active L1 table. If the
snapshot's L1 table is actually larger than the current one, this leads
to a buffer overflow.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The qcow2 code assumes that s->snapshots is non-NULL if s->nb_snapshots
!= 0. By having the initialisation of both fields separated in
qcow2_open(), any error occuring in between would cause the error path
to dereference NULL in qcow2_free_snapshots() if the image had any
snapshots.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

bs->total_sectors is not the highest possible sector number that could
be involved in a copy on write operation: VM state is after the end of
the virtual disk. This resulted in wrong values for the number of
sectors to be copied (n).

The code that checks for the end of the image isn't required any more
because the code hasn't been calling the block layer's bdrv_read() for a
long time; instead, it directly calls qcow2_readv(), which doesn't error
out on VM state sector numbers.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Limiting the size of a single request to INT_MAX not only fixes a
direct integer overflow in bdrv_check_request() (which would only
trigger bad behaviour with ridiculously huge images, as in close to
2^64 bytes), but can also prevent overflows in all block drivers.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This test checks for proper bounds checking of some VDI input
headers.  The following is checked:

1. Max image size (1024TB) with the appropriate Blocks In Image
   value (0x3fffffff) is detected as valid.

2. Image size exceeding max (1024TB) is seen as invalid

3. Valid image size but with Blocks In Image value that is too
   small fails

4. Blocks In Image size exceeding max (0x3fffffff) is seen as invalid

5. 64MB image, with 64 Blocks In Image, and 1MB Block Size is seen
   as valid

6. Block Size < 1MB not supported

7. Block Size > 1MB not supported

[Max Reitz <mreitz@redhat.com> pointed out that "1MB + 1" in the test
case is wrong.  Change to "1MB + 64KB" to match the 0x110000 value.
--Stefan]
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Both compressed and uncompressed I/O is buffered.  dmg_open() calculates
the maximum buffer size needed from the metadata in the image file.

There is currently a buffer overflow since ->lengths[] is accounted
against the maximum compressed buffer size but actually uses the
uncompressed buffer:

  switch (s->types[chunk]) {
  case 1: /* copy */
      ret = bdrv_pread(bs->file, s->offsets[chunk],
                       s->uncompressed_chunk, s->lengths[chunk]);

We must account against the maximum uncompressed buffer size for type=1
chunks.

This patch fixes the maximum buffer size calculation to take into
account the chunk type.  It is critical that we update the correct
maximum since there are two buffers ->compressed_chunk and
->uncompressed_chunk.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The DMG metadata is stored as uint64_t, so use the same type for
sector_num.  int was a particularly poor choice since it is only 32-bit
and would truncate large values.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Chunk length and sectorcount are used for decompression buffers as well
as the bdrv_pread() count argument.  Ensure that they have reasonable
values so neither memory allocation nor conversion from uint64_t to int
will cause problems.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use the right types instead of signed int:

  size_t new_size;

  This is a byte count for g_realloc() that is calculated from uint32_t
  and size_t values.

  uint32_t chunk_count;

  Use the same type as s->n_chunks, which is used together with
  chunk_count.

This patch is a cleanup and does not fix bugs.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

It is not necessary to check errno for EINTR and the block layer does
not produce short reads.  Therefore we can drop the loop that attempts
to read a compressed chunk.

The loop is buggy because it incorrectly adds the transferred bytes
twice:

  do {
      ret = bdrv_pread(...);
      i += ret;
  } while (ret >= 0 && ret + i < s->lengths[chunk]);

Luckily we can drop the loop completely and perform a single
bdrv_pread().
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When a terminator is reached the base for offsets and sectors is stored.
The following records that are processed will use this base value.

If the first record we encounter is a terminator, then calculating the
base values would result in out-of-bounds array accesses.  Don't do
that.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Clean up the mix of tabs and spaces, as well as the coding style
violations in block/dmg.c.  There are no semantic changes since this
patch simply reformats the code.

This patch is necessary before we can make meaningful changes to this
file, due to the inconsistent formatting and confusing indentation.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The size in bytes is assigned to an int later, so check that instead of
the number of entries.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

In order to avoid integer overflows.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If the size becomes larger than what qcow2_open() would accept, fail the
growing operation.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This ensures that the checks catch all invalid cluster indexes
instead of returning the refcount of a wrong cluster.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

free_cluster_index is only correct if update_refcount() was called from
an allocation function, and even there it's brittle because it's used to
protect unfinished allocations which still have a refcount of 0 - if it
moves in the wrong place, the unfinished allocation can be corrupted.

So not using it any more seems to be a good idea. Instead, use the
first requested cluster to do the calculations. Return -EAGAIN if
unfinished allocations could become invalid and let the caller restart
its search for some free clusters.

The context of creating a snapsnot is one situation where
update_refcount() is called outside of a cluster allocation. For this
case, the change fixes a buffer overflow if a cluster is referenced in
an L2 table that cannot be represented by an existing refcount block.
(new_table[refcount_table_index] was out of bounds)

[Bump the qemu-iotests 026 refblock_alloc.write leak count from 10 to
11.
--Stefan]
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

len could become negative and would pass the check then. Nothing bad
happened because bdrv_pread() happens to return an error for negative
length values, but make variables for sizes unsigned anyway.

This patch also changes the behaviour to error out on invalid lengths
instead of silently truncating it to 1023.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This avoids an unbounded allocation.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This avoid unbounded memory allocation and fixes a potential buffer
overflow on 32 bit hosts.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The end of the refcount table must not exceed INT64_MAX so that integer
overflows are avoided.

Also check for misaligned refcount table. Such images are invalid and
probably the result of data corruption. Error out to avoid further
corruption.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Limit the in-memory reference count table size to 8 MB, it's enough in
practice. This fixes an unbounded allocation as well as a buffer
overflow in qcow2_refcount_init().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Header, header extension and the backing file name must all be stored in
the first cluster. Setting the backing file to a much higher value
allowed header extensions to become much bigger than we want them to be
(unbounded allocation).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>