/public/qobject_is_equal_conversion: OK

=================================================================
==14396==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 56 byte(s) in 1 object(s) allocated from:
    #0 0x7f07682c5850 in malloc (/lib64/libasan.so.4+0xde850)
    #1 0x7f0767d12f0c in g_malloc ../glib/gmem.c:94
    #2 0x7f0767d131cf in g_malloc_n ../glib/gmem.c:331
    #3 0x562bd767371f in do_test_equality /home/elmarco/src/qq/tests/check-qobject.c:49
    #4 0x562bd7674a35 in qobject_is_equal_dict_test /home/elmarco/src/qq/tests/check-qobject.c:267
    #5 0x7f0767d37b04 in test_case_run ../glib/gtestutils.c:2237
    #6 0x7f0767d37ec4 in g_test_run_suite_internal ../glib/gtestutils.c:2321
    #7 0x7f0767d37f6d in g_test_run_suite_internal ../glib/gtestutils.c:2333
    #8 0x7f0767d38184 in g_test_run_suite ../glib/gtestutils.c:2408
    #9 0x7f0767d36e0d in g_test_run ../glib/gtestutils.c:1674
    #10 0x562bd7674e75 in main /home/elmarco/src/qq/tests/check-qobject.c:327
    #11 0x7f0766009039 in __libc_start_main (/lib64/libc.so.6+0x21039)
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-9-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a new test with --enable-debug using clang/asan/ubsan, remove
--enable-debug from test-clang & test-mingw.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180104160523.22995-7-marcandre.lureau@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Build fedora image with ASAN/UBSan support.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180104160523.22995-6-marcandre.lureau@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When --enable-debug is turned on, configure doesn't set -O level, and
uses default compiler -O0 level, which is slow.

Instead, use -Og if supported by the compiler (optimize debugging
experience), or -O1 (keeps code somewhat debuggable and works around
compiler bugs).

Unfortunately, gcc has many false-positive maybe-uninitialized
errors with Og and O1 (f27 gcc 7.2.1 20170915):

/home/elmarco/src/qemu/hw/ipmi/isa_ipmi_kcs.c: In function ‘ipmi_kcs_ioport_read’:
/home/elmarco/src/qemu/hw/ipmi/isa_ipmi_kcs.c:279:12: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
     return ret;
            ^~~
cc1: all warnings being treated as errors
make: *** [/home/elmarco/src/qemu/rules.mak:66: hw/ipmi/isa_ipmi_kcs.o] Error 1
make: *** Waiting for unfinished jobs....
/home/elmarco/src/qemu/hw/ide/ahci.c: In function ‘ahci_populate_sglist’:
/home/elmarco/src/qemu/hw/ide/ahci.c:903:58: error: ‘tbl_entry_size’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
         if ((off_idx == -1) || (off_pos < 0) || (off_pos > tbl_entry_size)) {
                                                 ~~~~~~~~~^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [/home/elmarco/src/qemu/rules.mak:66: hw/ide/ahci.o] Error 1
/home/elmarco/src/qemu/hw/display/qxl.c: In function ‘qxl_add_memslot’:
/home/elmarco/src/qemu/hw/display/qxl.c:1397:52: error: ‘pci_start’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
     memslot.virt_end   = virt_start + (guest_end   - pci_start);
                                       ~~~~~~~~~~~~~^~~~~~~~~~~~
/home/elmarco/src/qemu/hw/display/qxl.c:1389:9: error: ‘pci_region’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
         qxl_set_guest_bug(d, "%s: pci_region = %d", __func__, pci_region);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

There seems to be a long list of related bugs in upstream GCC, some of
them are being fixed very recently:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=24639

For now, let's workaround it by using Wno-maybe-uninitialized (gcc-only).
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180104160523.22995-5-marcandre.lureau@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

$ make print-CFLAGS
CFLAGS=-fsanitize=address -Og -g

Trick from various sources:
https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile
https://www.cmcrossroads.com/article/printing-value-makefile-variableSigned-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180104160523.22995-4-marcandre.lureau@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move generic make flags in MAKEFLAGS (SUBDIR_MAKEFLAGS is more qemu specific).

Use --quiet to silence make 'is up to date' message.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180104160523.22995-3-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When linking qemu-ga under some configuration (when gthread-2.0.pc
doesn't have -pthread, as happening atm with meson build), you may
have this linking issue:

/usr/bin/ld: libqemuutil.a(qemu-thread-posix.o): undefined reference to symbol 'pthread_setname_np@@GLIBC_2.12'
/usr/lib64/libpthread.so.0: error adding symbols: DSO missing from command line

Make sure qemu-ga links with the pthread library, by adding correct
flags to libs_qga.

This is really a QEMU bug, because it's QEMU code that's using pthread
functions, and so we must explicitly link against pthreads. The bug
was just masked by the fact that often some pkg-config or another for
one of our dependencies will add -pthread to the link line anyway.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20180104160523.22995-2-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's a replacement of g_timeout_add[_seconds]() for chardevs.  Chardevs
now can have dedicated gcontext, we should always bind chardev tasks
onto those gcontext rather than the default main context.  Since there
are quite a few of g_timeout_add[_seconds]() callers, a new function
qemu_chr_timeout_add_ms() is introduced.

One thing to mention is that, terminal3270 is still always running on
main gcontext.  However let's convert that as well since it's still part
of chardev codes and in case one day we'll miss that when we move it out
of main gcontext too.

Also, convert all the timers from GSource tags into GSource pointers.
Gsource tag IDs and g_source_remove()s can only work with default
gcontext, while now these GSources can logically be attached to other
contexts.  So let's use explicit g_source_destroy() plus another
g_source_unref() to remove a timer.

Note: when in the timer handler, we don't need the g_source_destroy()
any more since that'll be done automatically if the timer handler
returns false (and that's what all the current handlers do).

Yet another note: in pty_chr_rearm_timer() we take special care for
ms=1000.  This patch merged the two cases into one.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-4-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The idle task will be attached to main gcontext even if the chardev
backend is running in another gcontext.  Fix the only caller by
extending the g_idle_add() logic into the more powerful
g_source_attach().  It's basically g_idle_add_full() implementation, but
with the chardev's gcontext passed in.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-3-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In commit 6bbb6c06 ("chardev: use per-dev context for
io_add_watch_poll", 2017-09-22) all the chardev watches are converted to
use per-chardev gcontext to support chardev to be run outside default
main thread.  However that's still missing one call from the frontend
code.  Touch that up.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-2-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Certain PMU-related MSRs are not supported for CPUs with PMU
architecture below version 2. KVM rejects any access to them (see
intel_is_valid_msr_idx routine in KVM), and QEMU fails on the following
assertion:

  kvm_put_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.

QEMU also could fail if KVM exposes less fixed counters then 3. It could
happen if host system run inside another hypervisor, which is tweaking
PMU-related CPUID. To prevent possible fail, number of fixed counters now is
obtained in the same way as number of GP counters.
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NJan Dakinevich <jan.dakinevich@virtuozzo.com>
Message-Id: <1514383466-7257-1-git-send-email-jan.dakinevich@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

HPET saves its state by calculating the current time and recovers timer
offset using this calculated value. But these calculations include
divisions and multiplications. Therefore the timer state cannot be recovered
precise enough.
This patch introduces saving of the original value of the offset to
preserve the determinism of the timer.
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: NMaria Klimushenkova <maria.klimushenkova@ispras.ru>
Reviewed-by: NJuan Quintela <quintela@redhat.com>

--
v3: Added compat property for correct migration.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When -no-acpi option is used with Q35 machine type, no guest ACPI is
built, but the ACPI device is still created, so only checking the
presence of ACPI device before memory plug/unplug is not enough in
such cases. Check whether ACPI is disabled globally in addition and
fail memory plug/unplug if it's disabled.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171222015120.31730-1-haozhong.zhang@intel.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

scsi_disk_emulate_command passes in_buf == NULL when sent a REQUEST
SENSE command.  Check for in_len == 0 before dereferencing in_buf.

Fixes: f68d98b2Reported-by: NRoman Kagan <rkagan@virtuozzo.com>
Tested-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add the property to the device model, then parse it by calling
blkconf_apply_backend_options().

In addition to blk_set_perm(), the called function also handles error
options and wce. For error options we've already checked that the
default values are used, for wce we don't have the option either so it
is always the default (true). In other words there is no change of
behavior in these regards.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <20171205151553.7834-1-famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

target-arm queue:
 * add aarch64_be linux-user target
 * Virt: ACPI: fix qemu assert due to re-assigned table data address
 * imx_fec: various bug fixes and cleanups
 * hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()
 * hw/sd/pxa2xx_mmci: add read/write() trace events
 * linux-user/arm/nwfpe: Check coprocessor number for FPA emulation
 * target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions
 * hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
 * hw/intc/arm_gic: reserved register addresses are RAZ/WI

# gpg: Signature made Thu 11 Jan 2018 13:37:25 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180111: (26 commits)
  hw/intc/arm_gic: reserved register addresses are RAZ/WI
  hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
  target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions
  linux-user/arm/nwfpe: Check coprocessor number for FPA emulation
  hw/sd/pxa2xx_mmci: add read/write() trace events
  hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()
  imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register file
  imx_fec: Fix a typo in imx_enet_receive()
  imx_fec: Use correct length for packet size
  imx_fec: Add support for multiple Tx DMA rings
  imx_fec: Emulate SHIFT16 in ENETx_RACC
  imx_fec: Use MIN instead of explicit ternary operator
  imx_fec: Use ENET_FTRL to determine truncation length
  imx_fec: Move Tx frame buffer away from the stack
  imx_fec: Change queue flushing heuristics
  imx_fec: Refactor imx_eth_enable_rx()
  imx_fec: Do not link to netdev
  Virt: ACPI: fix qemu assert due to re-assigned table data address
  target/arm: Fix stlxp for aarch64_be
  linux-user: Activate armeb handler registration
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The GICv2 specification says that reserved register addresses
must RAZ/WI; now that we implement external abort handling
for Arm CPUs this means we must return MEMTX_OK rather than
MEMTX_ERROR, to avoid generating a spurious guest data abort.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>

The GICv3 specification says that reserved register addresses
should RAZ/WI. This means we need to return MEMTX_OK, not MEMTX_ERROR,
because now that we support generating external aborts the
latter will cause an abort on new board models.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>

Refactor disas_thumb2_insn() so that it generates the code for raising
an UNDEF exception for invalid insns, rather than returning a flag
which the caller must check to see if it needs to generate the UNDEF
code. This brings the function in to line with the behaviour of
disas_thumb_insn() and disas_arm_insn().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 1513080506-17703-1-git-send-email-peter.maydell@linaro.org

Our copy of the nwfpe code for emulating of the old FPA11 floating
point unit doesn't check the coprocessor number in the instruction
when it emulates it.  This means that we might treat some
instructions which should really UNDEF as being FPA11 instructions by
accident.

The kernel's copy of the nwfpe code doesn't make this error; I suspect
the bug was noticed and fixed as part of the process of mainlining
the nwfpe code more than a decade ago.

Add a check that the coprocessor number (which is always in bits
[11:8] of the instruction) is either 1 or 2, which is where the
FPA11 lives.
Reported-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 20180104000156.30932-1-f4bug@amsat.org
[PMM: add missing include]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 20180103224208.30291-2-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some i.MX SoCs (e.g. i.MX7) have FEC registers going as far as offset
0x614, so to avoid getting aborts when accessing those on QEMU, extend
the register file to cover FSL_IMX25_FEC_SIZE(16K) of address space
instead of just 1K.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use 'frame_size' instead of 'len' when calling qemu_send_packet(),
failing to do so results in malformed packets send in case when that
packed is fragmented into multiple DMA transactions.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

More recent version of the IP block support more than one Tx DMA ring,
so add the code implementing that feature.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Needed to support latest Linux kernel driver which relies on that
functionality.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Frame truncation length, TRUNC_FL, is determined by the contents of
ENET_FTRL register, so convert the code to use it instead of a
hardcoded constant.

To avoid the case where TRUNC_FL is greater that ENET_MAX_FRAME_SIZE,
increase the value of the latter to its theoretical maximum of 16K.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make Tx frame assembly buffer to be a paort of IMXFECState structure
to avoid a concern about having large data buffer on the stack.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In current implementation, packet queue flushing logic seem to suffer
from a deadlock like scenario if a packet is received by the interface
before before Rx ring is initialized by Guest's driver. Consider the
following sequence of events:

	1. A QEMU instance is started against a TAP device on Linux
	   host, running Linux guest, e. g., something to the effect
	   of:

	   qemu-system-arm \
	      -net nic,model=imx.fec,netdev=lan0 \
	      netdev tap,id=lan0,ifname=tap0,script=no,downscript=no \
	      ... rest of the arguments ...

	2. Once QEMU starts, but before guest reaches the point where
	   FEC deriver is done initializing the HW, Guest, via TAP
	   interface, receives a number of multicast MDNS packets from
	   Host (not necessarily true for every OS, but it happens at
	   least on Fedora 25)

	3. Recieving a packet in such a state results in
	   imx_eth_can_receive() returning '0', which in turn causes
	   tap_send() to disable corresponding event (tap.c:203)

	4. Once Guest's driver reaches the point where it is ready to
	   recieve packets it prepares Rx ring descriptors and writes
	   ENET_RDAR_RDAR to ENET_RDAR register to indicate to HW that
	   more descriptors are ready. And at this points emulation
	   layer does this:

	   	 s->regs[index] = ENET_RDAR_RDAR;
                 imx_eth_enable_rx(s);

	   which, combined with:

	   	  if (!s->regs[ENET_RDAR]) {
		     qemu_flush_queued_packets(qemu_get_queue(s->nic));
		  }

	   results in Rx queue never being flushed and corresponding
	   I/O event beign disabled.

To prevent the problem, change the code to always flush packet queue
when ENET_RDAR transitions 0 -> ENET_RDAR_RDAR.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Refactor imx_eth_enable_rx() to have more meaningfull variable name
than 'tmp' and to reduce number of logical negations done.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Binding to a particular netdev doesn't seem to belong to this layer
and should probably be done as a part of board or SoC specific code.

Convert all of the users of this IP block to use
qdev_set_nic_properties() instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

acpi_data_push uses g_array_set_size to resize the memory size. If there
is no enough contiguous memory, the address will be changed. If we use
the old value, it will assert.
qemu-kvm: hw/acpi/bios-linker-loader.c:214: bios_linker_loader_add_checksum:
Assertion `start_offset < file->blob->len' failed.`

This issue only happens in building SRAT table now but here we unify the
pattern for other tables as well to avoid possible issues in the future.
Signed-off-by: NZhaoshenglong <zhaoshenglong@huawei.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ldxp loads two consecutive doublewords from memory regardless of CPU
endianness. On store, stlxp currently assumes to work with a 128bit
value and consequently switches order in big-endian mode. With this
change it packs the doublewords in reverse order in anticipation of the
128bit big-endian store operation interposing them so they end up in
memory in the right order. This makes it work for both MTTCG and !MTTCG.
It effectively implements the ARM ARM STLXP operation pseudo-code:

data = if BigEndian() then el1:el2 else el2:el1;

With this change an aarch64_be Linux 4.14.4 kernel succeeds to boot up
in system emulation mode.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

armeb is missing from the target list in qemu-binfmt-conf.sh. Add it so
the handler for those binaries gets registered by the script.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-8-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Give big-endian arm and aarch64 CPUs their own family in
qemu-binfmt-conf.sh to make sure we register qemu-user for binaries of
the opposite endianness on arm and aarch64. Apart from the family
assignments of the magic values, qemu_get_family() needs to be able to
distinguish the two and recognise aarch64{,_be} as well.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-7-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As we now have a linux-user aarch64_be target, we can add it to the list
of supported targets in qemu-binfmt-conf.sh
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-6-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add target aarch64_be-linux-user. This allows a qemu-aarch64_be binary
to be built that will run big-endian aarch64 binaries.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-5-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since for aarch64 the signal trampoline is synthesized directly into the
signal frame we need to make sure the instructions end up little-endian.
Otherwise the wrong endianness will cause a SIGILL upon return from the
signal handler on big-endian targets.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-4-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>