Avoids a wasted cycle loading up small constants.

Simplify the code assuming the tcg optimizer is going to work
and don't expect the first operand of the add to be constant.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

When performing an operation with two input registers, we'd leave
the stop bit (and thus an extra cycle) that's only needed when one
or the other input is a constant.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Since the move away from the global areg0, we're no longer globally
reserving areg0.  Which means our use of R7 clobbers a call-saved
register.  Shift areg0 into the windowed registers.  Indeed, choose
the incoming parameter register that it comes to us by.

This requires moving the register holding the return address elsewhere.
Choose R33 for tidiness.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

There was a misconception that a stop bit is required between a compare
and the branch that uses the predicate set by the compare.  This lead to
the usage of an extra bundle in which to perform the compare.  The extra
bundle left room for constants to be loaded for use with the compare insn.

If we pack the compare and the branch together in the same bundle, then
there's no longer any room for non-zero constants.  At which point we
can eliminate half the function by not handling them.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Using only indirect calls results in 3 bundles (one to load the
descriptor address), and 4 stop bits.  By looking through the
descriptor to the constants, we can perform the call with 2
bundles and only 1 stop bit.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

There's no need to go through the full opcode-to-insn function call
to generate nops.  This makes the source a bit more readable.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

# By Luiz Capitulino (1) and Richard Henderson (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
  MAINTAINERS: add git tree info for HMP, QMP and QAPI
  Adjust qapi-visit for python-2.4.3

Message-id: 1384281985-11100-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

pci, pc, virtio bug fixes

This reverts PCI master abort support - we'll want it
eventually but it exposes too many core bugs to be safe for 1.7.
This also reverts a recent exec.c change that was an
attempt to work-around some of these core bugs.

Also included are small fixes in pc and virtio,
and a core loader fix for PPC bamboo.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 10 Nov 2013 05:13:22 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  Revert "exec: limit system memory size"
  Revert "hw/pci: partially handle pci master abort"
  loader: drop return value for rom_add_blob_fixed
  acpi-build: disable with -no-acpi
  virtio-net: only delete bh that existed
  Fix pc migration from qemu <= 1.5

Message-id: 1384159176-31662-1-git-send-email-mst@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Dmitry Fleytman (1) and others
# Via Stefan Hajnoczi
* stefanha/net:
  virtio-net: broken RX filtering logic fixed
  net: fix qemu_flush_queued_packets() in presence of a hub
  net: disallow to specify multicast MAC address

Message-id: 1383928804-28866-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Jeff Cody (26) and others
# Via Stefan Hajnoczi
* stefanha/block: (37 commits)
  block: Round up total_sectors
  block: vhdx qemu-iotest - log replay of data sector
  block: qemu-iotests for vhdx, add write test support
  block: vhdx - update _make_test_img() to filter out vhdx options
  block: vhdx - add .bdrv_create() support
  block: vhdx - fix comment typos in header, fix incorrect struct fields
  block: vhdx - break out code operations to functions
  block: vhdx - move more endian translations to vhdx-endian.c
  block: vhdx - remove BAT file offset bit shifting
  block: vhdx write support
  block: vhdx - add log write support
  block: vhdx - add region overlap detection for image files
  block: vhdx - log parsing, replay, and flush support
  block: vhdx code movement - move vhdx_close() above vhdx_open()
  block: vhdx - update log guid in header, and first write tracker
  block: vhdx - break endian translation functions out
  block: vhdx - log support struct and defines
  block: vhdx code movement - VHDXMetadataEntries and BDRVVHDXState to header.
  block: vhdx - add header update capability.
  block: vhdx - minor comments and typo correction.
  ...

Message-id: 1383905551-16411-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Two small fixes for 1.7:

- add missing debug feature to dc233c xtensa core;
- fix qemu abort caused by gdb attempt to invalidate a breakpoint by
  virtual address for which there's no mapping.

# gpg: Signature made Thu 07 Nov 2013 09:32:19 PM PST using RSA key ID F83FA044
# gpg: Can't check signature: public key not found

# By Max Filippov
# Via Max Filippov
* filippov/tags/20131108-xtensa:
  target-xtensa: add missing DEBUG section to dc233c config
  exec: fix breakpoint_invalidate when pc may not be translated

Message-id: 1383889643-21621-1-git-send-email-jcmvbkbc@gmail.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/audio.3:
  ossaudio: check for oss support in oss_audio_init
  Revert "ossaudio: do not enable by default"

Message-id: 1383823947-5132-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Stefan Weil
# Via Stefan Weil
* sweil/mingw:
  linux-user: Fix stat64 syscall for SPARC64
  configure: Add config.status to recreate the current configuration
  nsis: Improved support for parallel installation of 32 and 64 bit code

Message-id: 1383804909-376-1-git-send-email-sw@weilnetz.de
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

We say we support python 2.4, but python 2.4.3 does not
support the "expr if test else expr" syntax used here.

This allows QEMU to compile on RHEL 5.3, the last release for ia64.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This reverts commit 818f86b8.

This was a work-around for bugs elsewhere in the system,
exposed by commit a53ae8e9:
    "hw/pci: partially handle pci master abort"
since that's reverted now, the work-around is not required for 1.7
anymore.
The proper fix is supporting full 64 bit addresses in the radix tree.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NMarcel Apfelbaum <marcel.a@redhat.com>

This reverts commit a53ae8e9.

The patch being reverted introduced a low-priority memory region
covering all 64 bit pci address space.  This exposed the following bugs
elsewhere in the code:
 1. Some memory regions have INT64_MAX size, where the
    intent was all 64 bit address space.
    This results in a sub-page region, should be UINT64_MAX.
 2. page table rendering in exec.c ignores physical address bits
    above TARGET_PHYS_ADDR_SPACE_BITS.
    Access outside this range (e.g. from device DMA, or gdb stub)
    ends up with a wrong region.  Registering a region outside this
    range leads to page table corruption.
 3. Some regions overlap PCI hole and have same priority.
    This only works as long as no device uses the overlapping address.

It doesn't look like we can resolve all issues in time for 1.7.
Let's fix the bugs first and apply afterwards for 1.8.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

rom_add_blob never fails, and neither does rom_add_blob_fixed,
so there's no need to return value from it.

In fact, rom_add_blob_fixed was erroneously returning -1 unconditionally
which made the only system that checked the return value -M bamboo fail
to start.

Drop the return value and drop checks from ppc440_bamboo to
fix this failure.
Reported-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

QEMU will currently crash if started with -no-acpi flag
since acpi build code probes the PM device which isn't present
in this configuration.

To fix, don't expose ACPI tables to guest when acpi has been
disabled from command line.

Fixes LP# 1248854
https://bugs.launchpad.net/qemu/+bug/1248854Reported-by: Nchao zhou <chao.zhou@intel.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>

We delete without check whether it existed during exit. This will lead NULL
pointer deference since it was created conditionally depends on guest driver
status and features. So add a check of existence before trying to delete it.

Cc: qemu-stable@nongnu.org
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The following commit introduced a migration incompatibility:

commit 568f0690
Author: David Gibson <david@gibson.dropbear.id.au>
Date:   Thu Jun 6 18:48:49 2013 +1000

    pci: Replace pci_find_domain() with more general pci_root_bus_path()

The issue is that i440fx savevm idstr went from 0000:00:00.0/I440FX to
0000:00.0/I440FX. Unfortunately we are stuck with the breakage for
1.6 machine types.

Add a compat property to maintain the busted idstr for the 1.6 machine
types, but revert to the old style format for 1.7+, and <= 1.5.

Tested with migration from qemu 1.5, qemu 1.6, and qemu.git.

Cc: qemu-stable@nongnu.org
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Upon processing of VIRTIO_NET_CTRL_MAC_TABLE_SET command
multicast list overwrites unicast list in mac_table.
This leads to broken logic for both unicast and multicast RX filtering.
Signed-off-by: NDmitry Fleytman <dfleytma@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Do not return after net_hub_flush(). Always flush callee network client
incoming queue.
Signed-off-by: NSergey Fedorov <s.fedorov@samsung.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

[Assigning a multicast MAC address to a NIC leads to confusing behavior.
Reject multicast MAC addresses so users are alerted to their error
straight away.

The "net/eth.h" in6_addr rename prevents a name collision with
<netinet/in.h> on Linux.
-- Stefan]
Signed-off-by: NDmitry V. Krivenok <krivenok.dmitry@gmail.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Since b94a2610, bdrv_getlength() is omitted when probing image. VMDK
monolithicFlat is broken by that because a file < 512 bytes can't be
read with its total_sectors truncated to 0. This patch round up the size
to BDRV_SECTOR_SIZE, when a image size is not sector aligned.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This fixes missing debug feature opcodes of dc233c core variant.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

This fixes qemu abort with the following message:

    include/qemu/int128.h:22: int128_get64: Assertion `!a.hi' failed.

which happens due to attempt to invalidate breakpoint by virtual address
for which get_phys_page_debug couldn't find mapping.

For more details see
http://lists.nongnu.org/archive/html/qemu-devel/2013-09/msg04582.html

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

This tests the replay of a data sector in a VHDX image file.

The image file is a 10G dynamic image, with 4MB block size.  The
image was created with qemu-img, and the log left unplayed by
modification of the vhdx image format driver.

It was verified under both QEMU and Hyper-V that the image file,
post log replay, matched.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This removes the IMGFMT_GENERIC blocker for read-only, so existing
iotests run read/write tests for vhdx images created by qemu-img (e.g.
tests 001, 002, 003).

In addition, this updates the sample image test for the Hyper-V
created image, to verify we can write it as well.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The non-global option output is suppresed in _make_test_img() for
output verification in the 0?? tests.  This adds suppression for
the vhdx-unique options as well.  This allows check -vhdx to run
successfully.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds support for VHDX image creation, for images of type "Fixed"
and "Dynamic".  "Differencing" types (i.e., VHDX images with backing
files) are currently not supported.

Options for image creation include:
    * log size:
        The size of the journaling log for VHDX.  Minimum is 1MB,
        and it must be a multiple of 1MB. Invalid log sizes will be
        silently fixed by rounding up to the nearest MB.

        Default is 1MB.

    * block size:
        This is the size of a payload block.  The range is 1MB to 256MB,
        inclusive, and must be a multiple of 1MB as well.  Invalid sizes
        and multiples will be silently fixed.  If '0' is passed, then
        a sane size is chosen (depending on virtual image size).

        Default is 0 (Auto-select).

    * subformat:
        - "dynamic"
            An image without data pre-allocated.
        - "fixed"
            An image with data pre-allocated.

        Default is "dynamic"

When creating the image file, the lettered sections are created:

-----------------------------------------------------------------.
|   (A)    |   (B)    |    (C)    |     (D)       |     (E)
|  File ID |  Header1 |  Header 2 |  Region Tbl 1 |  Region Tbl 2
|          |          |           |               |
.-----------------------------------------------------------------.
0         64KB      128KB       192KB           256KB          320KB

.---- ~ ----------- ~ ------------ ~ ---------------- ~ -----------.
|     (F)     |     (G)       |    (H)    |
| Journal Log |  BAT / Bitmap |  Metadata |  .... data ......
|             |               |           |
.---- ~ ----------- ~ ------------ ~ ---------------- ~ -----------.
1MB         (var.)          (var.)      (var.)
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

VHDXPage83Data and VHDXParentLocatorHeader both incorrectly had their
MSGUID fields set as arrays of 16.  This is incorrect (it stems from
an early version where those fields were uint_8 arrays).  Those fields
were, up to this patch, unused.

Also, there were a couple of typos and incorrect wording in comments,
and those have been fixed up as well.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This is preperation for vhdx_create().  The ability to write headers,
and calculate the number of BAT entries will be needed within the
create() functions, so move this relevant code into helper functions.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

In preparation for vhdx_create(), move more endian translation
functions out to vhdx-endian.c.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Bit shifting can be fun, but in this case it was unnecessary.  The
upper 44 bits of the 64-bit BAT entry is specifies the File Offset,
so we shifted the bits to get access to the value.

However, per the spec the value is in MB.  So we dutifully shifted back
to the left by 20 bits, to convert to a true uint64_t file offset.

This replaces those steps with just a bit mask, to get rid of the lower
20 bits instead.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds support for writing to VHDX image files, using coroutines.
Writes into the BAT table goes through the VHDX log.  Currently, BAT
table writes occur when expanding a dynamic VHDX file, and allocating a
new BAT entry.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds support for writing to the VHDX log.

For spec details, see VHDX Specification Format v1.00:
https://www.microsoft.com/en-us/download/details.aspx?id=34750

There are a few limitations to this log support:
1.) There is no caching yet
2.) The log is flushed after each entry

The primary write interface, vhdx_log_write_and_flush(), performs a log
write followed by an immediate flush of the log.

As each log entry sector is a minimum of 4KB, partial sector writes are
filled in with data from the disk write destination.

If the current file log GUID is 0, a new GUID is generated and updated
in the header.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Regions in the image file cannot overlap - the log, region tables,
and metdata must all be unique and non-overlapping.

This adds region checking by means of a QLIST; there can be a variable
number of regions and metadata (there may be metadata or region tables
that we do not recognize / know about, but are not required).

This adds the capability to register a region for later checking, and
to check against registered regions for any overlap.

Also, if neither the BAT or Metadata region tables are found, return
error.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds support for VHDX v0 logs, as specified in Microsoft's
VHDX Specification Format v1.00:
https://www.microsoft.com/en-us/download/details.aspx?id=34750

The following support is added:

* Log parsing, and validation - validate that an existing log
  is correct.

* Log search - search through an existing log, to find any valid
  sequence of entries.

* Log replay and flush - replay an existing log, and flush/clear
  the log when complete.

The VHDX log is a circular buffer, with elements (sectors) of 4KB.

A log entry is a variably-length number of sectors, that is
comprised of a header and 'descriptors', that describe each sector.

A log may contain multiple entries, know as a log sequence.  In a log
sequence, each log entry immediately follows the previous entry, with an
incrementing sequence number.  There can only ever be one active and
valid sequence in the log.

Each log entry must match the file log GUID in order to be valid (along
with other criteria).  Once we have flushed all valid log entries, we
marked the file log GUID to be zero, which indicates a buffer with no
valid entries.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>