Change the maintainer for Allwinner A10 to myself as Li Guang's mail
address bounces. While at it, extend the file pattern for the entry to
include allwinner_emac.[ch].
Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1442865156-5598-1-git-send-email-b.galvani@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

While virt machine creates two flash devices with total size 0x08000000,
the ACPI table generation code was wrongly using this total size as the
size of each flash device, so it would overlap other MMIO spaces.
Make each device entry in the table half the total; this brings the
ACPI table into line with the code which generates the device tree
and which creates the flash devices themselves.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NWei Huang <wei@redhat.com>
Tested-by: NGraeme Gregory <graeme.gregory@linaro.org>
Message-id: 1442455041-6596-1-git-send-email-shannon.zhao@linaro.org
[PMM: edited commit message]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add gic_version to VirtMachineState, set it to value of the option
and pass it around where necessary. Instantiate devices and fdt
nodes according to the choice.

max_cpus for virt machine increased to 123 (calculated from redistributor
space available in the memory map). GICv2 compatibility check happens
inside arm_gic_common_realize().

ITS region is added to the memory map too, however currently it not used,
just reserved.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Tested-by: NAshok kumar <ashoks@broadcom.com>
[PMM: Added missing cpu_to_le* calls, thanks to Shannon Zhao]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is the initial version of KVM-accelerated GICv3 support.
State load and save are not yet supported, live migration is
not possible.

In order to get correct class name in a simpler way, gicv3_class_name()
function is implemented, similar to gic_class_name().
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NAshok kumar <ashoks@broadcom.com>
Message-id: 69d8f01d14994d7a1a140e96aef59fd332d02293.1441784344.git.p.fedin@samsung.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This allows us to use different GIC types from v2. There are no kernels
which could advertise KVM_CAP_DEVICE_CTRL without the actual ability to
create GIC with it.

GIC version probe code moved to kvm_arm_vgic_probe() which will be used
later.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Reviewed-by: NEric Auger <eric.auger@linaro.org>
Tested-by: NAshok kumar <ashoks@broadcom.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 015f4d9e4a8a50dfbdd734c4730558e24a69c6dc.1441784344.git.p.fedin@samsung.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some functions previously used only by vGICv2 are useful also for vGICv3
implementation. Untie them from GICState and make accessible from within
other modules:
- kvm_arm_gic_set_irq()
- kvm_gic_supports_attr() - moved to common code and renamed to
  kvm_device_check_attr()
- kvm_gic_access() - turned into GIC-independent kvm_device_access().
  Data pointer changed to void * because some GICv3 registers are
  64-bit wide

Some of these changes are not used right now, but they will be helpful for
implementing live migration.

Actually kvm_dist_get() and kvm_dist_put() could also be made reusable, but
they would require two extra parameters (s->dev_fd and s->num_cpu) as well as
lots of typecasts of 's' to DeviceState * and back to GICState *. This makes
the code very ugly so i decided to stop at this point. I tried also an
approach with making a base class for all possible GICs, but it would contain
only three variables (dev_fd, cpu_num and irq_num), and accessing them through
the rest of the code would be again tedious (either ugly casts or qemu-style
separate object pointer). So i disliked it too.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Tested-by: NAshok kumar <ashoks@broadcom.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 2ef56d1dd64ffb75ed02a10dcdaf605e5b8ff4f8.1441784344.git.p.fedin@samsung.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This class is to be used by both software and KVM implementations of GICv3

Currently it is mostly a placeholder, but in future it is supposed to hold
qemu's representation of GICv3 state, which is necessary for migration.

The interface of this class is fully compatible with GICv2 one. This is
done in order to simplify integration with existing code.
Signed-off-by: NShlomo Pongratz <shlomo.pongratz@huawei.com>
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Reviewed-by: NEric Auger <eric.auger@linaro.org>
Tested-by: NAshok kumar <ashoks@broadcom.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: aff8baaee493cdcab0694b4a1d4dd5ff27c37ed2.1441784344.git.p.fedin@samsung.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

VFIO updates 2015-09-23

 - Tracing improvements to use common prefixes for functional areas
 - Quirks overhaul:
   - Split PCI quirks to separate file
   - Make them understandable and more extensible
   - Improve use of MemoryRegions and eliminate use of target pagesize
 - Eliminate build-time debugging, everything migrated to runtime opts

# gpg: Signature made Wed 23 Sep 2015 21:09:05 BST using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"

* remotes/awilliam/tags/vfio-update-20150923.0:
  vfio/pci: Add emulated PCI IDs
  vfio/pci: Cache vendor and device ID
  vfio/pci: Move AMD device specific reset to quirks
  vfio/pci: Remove old config window and mirror quirks
  vfio/pci: Config mirror quirk
  vfio/pci: Config window quirks
  vfio/pci: Rework RTL8168 quirk
  vfio/pci: Cleanup Nvidia 0x3d0 quirk
  vfio/pci: Cleanup ATI 0x3c3 quirk
  vfio/pci: Foundation for new quirk structure
  vfio/pci: Cleanup ROM blacklist quirk
  vfio/pci: Split quirks to a separate file
  vfio/pci: Extract PCI structures to a separate header
  vfio: Change polarity of our no-mmap option
  vfio/pci: Make interrupt bypass runtime configurable
  vfio/pci: Rename MSI/X functions for easier tracing
  vfio/pci: Rename INTx functions for easier tracing
  vfio/pci: Cleanup vfio_early_setup_msix() error path
  vfio/pci: Cleanup RTL8168 quirk and tracing
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Specifying an emulated PCI vendor/device ID can be useful for testing
various quirk paths, even though the behavior and functionality of
the device with bogus IDs is fully unsupportable.  We need to use a
uint32_t for the vendor/device IDs, even though the registers
themselves are only 16-bit in order to be able to determine whether
the value is valid and user set.

The same support is added for subsystem vendor/device ID, though these
have the possibility of being useful and supported for more than a
testing tool.  An emulated platform might want to impose their own
subsystem IDs or at least hide the physical subsystem ID.  Windows
guests will often reinstall drivers due to a change in subsystem IDs,
something that VM users may want to avoid.  Of course careful
attention would be required to ensure that guest drivers do not rely
on the subsystem ID as a basis for device driver quirks.

All of these options are added using the standard experimental option
prefix and should not be considered stable.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Simplify access to commonly referenced PCI vendor and device ID by
caching it on the VFIOPCIDevice struct.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This is just another quirk, for reset rather than affecting memory
regions.  Move it to our new quirks file.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

These are now unused.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Re-implement our mirror quirk using the new infrastructure.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Config windows make use of an address register and a data register.
In VGA cards, these are often used to provide real mode code in the
BIOS an easy way to access MMIO registers since the window often
resides in an I/O port register.  When the MMIO register has a mirror
of PCI config space, we need to trap those accesses and redirect them
to emulated config space.

The previous version of this functionality made use of a single
MemoryRegion and single match address.  This version uses separate
MemoryRegions for each of the address and data registers and allows
for multiple match addresses.  This is useful for Nvidia cards which
have two ranges which index into PCI config space.

The previous implementation is left for the follow-on patch for a more
reviewable diff.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Another rework of this quirk, this time to update to the new quirk
structure.  We can handle the address and data registers with
separate MemoryRegions and a quirk specific data structure, making the
code much more understandable.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

The Nvidia 0x3d0 quirk makes use of a two separate registers and gives
us our first chance to make use of separate memory regions for each to
simplify the code a bit.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This is an easy quirk that really doesn't need a data structure if
its own.  We can pass vdev as the opaque data and access to the
MemoryRegion isn't required.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

VFIOQuirk hosts a single memory region and a fixed set of data fields
that try to handle all the quirk cases, but end up making those that
don't exactly match really confusing.  This patch introduces a struct
intended to provide more flexibility and simpler code.  VFIOQuirk is
stripped to its basics, an opaque data pointer for quirk specific
data and a pointer to an array of MemoryRegions with a counter.  This
still allows us to have common teardown routines, but adds much
greater flexibility to support multiple memory regions and quirk
specific data structures that are easier to maintain.  The existing
VFIOQuirk is transformed into VFIOLegacyQuirk, which further patches
will eliminate entirely.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Create a vendor:device ID helper that we'll also use as we rework the
rest of the quirks.  Re-reading the config entries, even if we get
more blacklist entries, is trivial overhead and only incurred during
device setup.  There's no need to typedef the blacklist structure,
it's a static private data type used once.  The elements get bumped
up to uint32_t to avoid future maintenance issues if PCI_ANY_ID gets
used for a blacklist entry (avoiding an actual hardware match).  Our
test loop is also crying out to be simplified as a for loop.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

The default should be to allow mmap and new drivers shouldn't need to
expose an option or set it to other than the allocation default in
their initfn.  Take advantage of the experimental flag to change this
option to the correct polarity.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Tracing is more effective when we can completely disable all KVM
bypass paths.  Make these runtime rather than build-time configurable.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This allows vfio_msi* tracing.  The MSI/X interrupt tracing is also
pulled out of #ifdef DEBUG_VFIO to avoid a recompile for tracing this
path.  A few cycles to read the message is hardly anything if we're
already in QEMU.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Rename functions and tracing callbacks so that we can trace vfio_intx*
to see all the INTx related activities.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

With the addition of the Chelsio quirk we have an error path out of
vfio_early_setup_msix() that doesn't free the allocated VFIOMSIXInfo
struct.  This doesn't introduce a leak as it still gets freed in the
vfio_put_device() path, but it's complicated and sloppy to rely on
that.  Restructure to free the allocated data on error and only link
it into the vdev on success.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

There's quite a bit of cleanup that can be done to the RTL8168 quirk,
as well as the tracing to prevent a spew of uninteresting accesses
for anything else the driver might choose to use the window registers
for besides the MSI-X table.  There should be no functional change,
but it's now possible to get compact and useful traces by enabling
vfio_rtl8168_quirk*, ex:

vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f000
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f000
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0xfee0100c
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f004
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f004
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f008
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f008
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x49b1
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

sPAPR Patch Queue: 2015-09-23

Highlights:
    * pseries-2.5 machine type
    * Memory hotplug for "pseries" guests
    * Fixes to the PAPR Dynamic Reconfiguration hotplug code
    * Several PAPR compliance fixes
    * New SLOF with:
        * GPT support
        * Much faster VGA handling

# gpg: Signature made Wed 23 Sep 2015 02:50:10 BST using DSA key ID FDDA6FC6
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F730 2185 38B4 D13E FD80  34F2 6882 CAC6 FDDA 6FC6

* remotes/dgibson/tags/spapr-next-20150923: (36 commits)
  sPAPR: Enable EEH on VFIO PCI device only
  sPAPR: Revert don't enable EEH on emulated PCI devices
  ppc/spapr: Implement H_RANDOM hypercall in QEMU
  ppc/spapr: Fix buffer overflow in spapr_populate_drconf_memory()
  spapr: Fix default NUMA node allocation for threads
  spapr: Move memory hotplug to RTAS_LOG_V6_HP_ID_DRC_COUNT type
  spapr: Support hotplug by specifying DRC count
  spapr: Revert to memory@XXXX representation for non-hotplugged memory
  spapr: Populate ibm,associativity-lookup-arrays correctly for non-NUMA
  spapr: Provide better error message when slots exceed max allowed
  spapr: Don't allow memory hotplug to memory less nodes
  spapr: Memory hotplug support
  spapr: Make hash table size a factor of maxram_size
  spapr: Support ibm,dynamic-reconfiguration-memory
  spapr: Add LMB DR connectors
  spapr: Use QEMU limit for maximum CPUs number
  spapr: Don't use QOM [*] syntax for DR connectors.
  spapr_drc: use RTAS return codes for methods called by RTAS
  spapr: Initialize hotplug memory address space
  spapr_drc: don't allow 'empty' DRCs to be unisolated or allocated
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This checks if the PCI device retrieved from the PCI device address
is VFIO PCI device when enabling EEH functionality. If it's not
VFIO PCI device, the EEH functonality isn't enabled.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This reverts commit 7cb18007 ("sPAPR: Don't enable EEH on emulated
PCI devices") as rtas_ibm_set_eeh_option() isn't the right place
to check if there has the corresponding PCI device for the input
address, which can be PE address, not PCI device address.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The PAPR interface defines a hypercall to pass high-quality
hardware generated random numbers to guests. Recent kernels can
already provide this hypercall to the guest if the right hardware
random number generator is available. But in case the user wants
to use another source like EGD, or QEMU is running with an older
kernel, we should also have this call in QEMU, so that guests that
do not support virtio-rng yet can get good random numbers, too.

This patch now adds a new pseudo-device to QEMU that either
directly provides this hypercall to the guest or is able to
enable the in-kernel hypercall if available. The in-kernel
hypercall can be enabled with the use-kvm property, e.g.:

 qemu-system-ppc64 -device spapr-rng,use-kvm=true

For handling the hypercall in QEMU instead, a "RngBackend" is
required since the hypercall should provide "good" random data
instead of pseudo-random (like from a "simple" library function
like rand() or g_random_int()). Since there are multiple RngBackends
available, the user must select an appropriate back-end via the
"rng" property of the device, e.g.:

 qemu-system-ppc64 -object rng-random,filename=/dev/hwrng,id=gid0 \
                   -device spapr-rng,rng=gid0 ...

See http://wiki.qemu-project.org/Features-Done/VirtIORNG for
other example of specifying RngBackends.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The buffer that is allocated in spapr_populate_drconf_memory()
is used for setting both, the "ibm,dynamic-memory" and the
"ibm,associativity-lookup-arrays" property. However, only the
size of the first one is taken into account when allocating the
memory. So if the length of the second property is larger than
the length of the first one, we run into a buffer overflow here!
Fix it by taking the length of the second property into account,
too.

Fixes: "spapr: Support ibm,dynamic-reconfiguration-memory" patch
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

At present, if guest numa nodes are requested, but the cpus in each node
are not specified, spapr just uses the default behaviour or assigning each
vcpu round-robin to nodes.

If smp_threads != 1, that will assign adjacent threads in a core to
different NUMA nodes.  As well as being just weird, that's a configuration
that can't be represented in the device tree we give to the guest, which
means the guest and qemu end up with different ideas of the NUMA topology.

This patch implements mc->cpu_index_to_socket_id in the spapr code to
make sure vcpus get assigned to nodes only at the socket granularity.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

Till now memory hotplug used RTAS_LOG_V6_HP_ID_DRC_INDEX hotplug type
which meant that we generated one hotplug type of EPOW event for every
256MB (SPAPR_MEMORY_BLOCK_SIZE). This quickly overruns the kernel
rtas log buffer thus resulting in loss of memory hotplug events. Switch
to RTAS_LOG_V6_HP_ID_DRC_COUNT hotplug type for memory so that we
generate only one event per hotplug request.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Support hotplug identifier type RTAS_LOG_V6_HP_ID_DRC_COUNT that allows
hotplugging of DRCs by specifying the DRC count.

While we are here, rename

spapr_hotplug_req_add_event() to spapr_hotplug_req_add_by_index()
spapr_hotplug_req_remove_event() to spapr_hotplug_req_remove_by_index()

so that they match with spapr_hotplug_req_add_by_count().
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Don't represent non-hotluggable memory under drconf node. With this
we don't have to create DRC objects for them.

The effect of this patch is that we revert back to memory@XXXX representation
for all the memory specified with -m option and represent the cold
plugged memory and hot-pluggable memory under
ibm,dynamic-reconfiguration-memory.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

When NUMA isn't configured explicitly, assume node 0 is present for
the purpose of creating ibm,associativity-lookup-arrays property
under ibm,dynamic-reconfiguration-memory DT node. This ensures that
the associativity index property is correctly updated in ibm,dynamic-memory
for the LMB that is hotplugged.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Currently when user specifies more slots than allowed max of
SPAPR_MAX_RAM_SLOTS (32), we error out like this:

qemu-system-ppc64: unsupported amount of memory slots: 64

Let the user know about the max allowed slots like this:

qemu-system-ppc64: Specified number of memory slots 64 exceeds max supported 32
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Currently PowerPC kernel doesn't allow hot-adding memory to memory-less
node, but instead will silently add the memory to the first node that has
some memory. This causes two unexpected behaviours for the user.

- Memory gets hotplugged to a different node than what the user specified.
- Since pc-dimm subsystem in QEMU still thinks that memory belongs to
  memory-less node, a reboot will set things accordingly and the previously
  hotplugged memory now ends in the right node. This appears as if some
  memory moved from one node to another.

So until kernel starts supporting memory hotplug to memory-less
nodes, just prevent such attempts upfront in QEMU.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Make use of pc-dimm infrastructure to support memory hotplug
for PowerPC.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>