X86 queue, 2015-04-27 (v2)

# gpg: Signature made Mon Apr 27 19:42:39 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  target-i386: Remove AMD feature flag aliases from CPU model table
  target-i386: X86CPU::xlevel2 QOM property
  target-i386: Make "level" and "xlevel" properties static
  qemu-config: Accept empty option values
  MAINTAINERS: Change status of X86 to Maintained
  MAINTAINERS: Add myself to X86
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

NUMA queue, 2015-04-27

# gpg: Signature made Mon Apr 27 19:02:19 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/numa-pull-request:
  MAINTAINERS: Add myself as NUMA code maintainer
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * memory system updates to support transaction attributes
 * set user-mode and secure attributes for accesses made by ARM CPUs
 * rename c1_coproc to cpacr_el1
 * adjust id_aa64pfr0 when has_el3 CPU property disabled
 * allow ARMv8 SCR.SMD updates

# gpg: Signature made Mon Apr 27 16:14:30 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20150427:
  Allow ARMv8 SCR.SMD updates
  target-arm: Adjust id_aa64pfr0 when has_el3 CPU property disabled
  target-arm: rename c1_coproc to cpacr_el1
  target-arm: Check watchpoints against CPU security state
  target-arm: Use attribute info to handle user-only watchpoints
  target-arm: Add user-mode transaction attribute
  target-arm: Use correct memory attributes for page table walks
  target-arm: Honour NS bits in page tables
  Switch non-CPU callers from ld/st*_phys to address_space_ld/st*
  exec.c: Capture the memory attributes for a watchpoint hit
  exec.c: Add new address_space_ld*/st* functions
  exec.c: Make address_space_rw take transaction attributes
  exec.c: Convert subpage memory ops to _with_attrs
  Add MemTxAttrs to the IOTLB
  Make CPU iotlb a structure rather than a plain hwaddr
  memory: Replace io_mem_read/write with memory_region_dispatch_read/write
  memory: Define API for MemoryRegionOps to take attrs and return status
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

spice: misc fixes.

# gpg: Signature made Mon Apr 27 12:03:16 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/spice/tags/pull-spice-20150427-1:
  spice: learn to hide cursor
  spice: set pointer position on hotspot
  spice: fix mouse cursor position
  spice: fix simple display on bigendian hosts
  monitor: Make client_migrate_info synchronous
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When CPU vendor is AMD, the AMD feature alias bits on
CPUID[0x80000001].EDX are already automatically copied from CPUID[1].EDX
on x86_cpu_realizefn(). When CPU vendor is Intel, those bits are
reserved and should be zero. On either case, those bits shouldn't be set
in the CPU model table.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

We already have "level" and "xlevel", only "xlevel2" is missing.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Static properties require only 1 line of code, much simpler than the
existing code that requires writing new getters/setters.

As a nice side-effect, this fixes an existing bug where the setters were
incorrectly allowing the properties to be changed after the CPU was
already realized.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Currently it is impossible to set an option in a config file to an empty
string, because the parser matches only lines containing non-empty
strings between double-quotes.

As sscanf() "[" conversion specifier only matches non-empty strings, add
a special case for empty strings.
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

"Odd Fixes" doesn't reflect the current status of target-i386. We have
people looking after it, now.
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

gtk: support text consoles without vte, bugfixes.

# gpg: Signature made Mon Apr 27 14:34:15 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-gtk-20150427-1:
  gtk: Avoid accel key leakage into guest on console switch
  gtk: Fix VTE focus grabbing
  console/gtk: add qemu_console_get_label
  gtk: bind to text terminal consoles too
  gtk: handle switch_surface(NULL) properly
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The "srat" and "numa" keywords will help get_maintainer.pl catch
NUMA-related code in other files too.
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Four little fixes

# gpg: Signature made Fri Apr 24 19:56:51 2015 BST using RSA key ID E24ED5A7
# gpg: Good signature from "Luiz Capitulino <lcapitulino@gmail.com>"

* remotes/qmp-unstable/tags/for-upstream:
  qmp: Give saner messages related to qmp_capabilities misuse
  qmp-commands: fix incorrect uses of ":O" specifier
  qapi: Drop dead genlist parameter
  balloon: improve error msg when adding second device
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The Spice protocol uses cursor position on hotspot: the client is
applying hotspot offset when drawing the cursor.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Denis Kirjanov is busy getting spice run on ppc64 and trapped into this
one.  Spice wire format is little endian, so we have to explicitly say
we want little endian when letting pixman convert the data for us.
Reported-by: NDenis Kirjanov <kirjanov@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Live migration with spice works like this today:

  (1) client_migrate_info monitor cmd
  (2) spice server notifies client, client connects to target host.
  (3) qemu waits until spice client connect is finished.
  (4) send over vmstate (i.e. main part of live migration).
  (5) spice handover to target host.

(3) is implemented by making client_migrate_info a async monitor
command.  This is the only async monitor command we have.

The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel.  That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.

Time to drop step (3).  This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

GTK2 sends the accel key to the guest when switching to the graphic
console via that shortcut. Resolve this by ignoring any keys until the
next key-release event. However, do not ignore keys when switching via
the menu or when on GTK3.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

At least on GTK2, the VTE terminal has to be specified as target of
gtk_widget_grab_focus. Otherwise, switching from one VTE terminal to
another causes the focus to get lost.

CC: John Snow <jsnow@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

[ kraxel: fixed build with CONFIG_VTE=n ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Updated scr_write to always allow updates to the SCR.SMD bit on ARMv8
regardless of whether virtualization (EL2) is enabled or not.
Signed-off-by: NGreg Bellows <greg.bellows@linaro.org>
Message-id: 1429888797-4378-1-git-send-email-greg.bellows@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1429669112-29835-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rename the field holding CPACR_EL1 system register state in AArch64
naming style.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
[PMM: also fixed a couple of missed occurrences in cpu.c]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix a TODO in bp_wp_matches() now that we have a function for
testing whether the CPU is currently in Secure mode or not.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Now that we have memory access attribute information in the watchpoint
checking code, we can correctly implement handling of watchpoints
which should match only on userspace accesses, where LDRT/STRT/LDT/STT
from EL1 are treated as userspace accesses.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Add a transaction attribute indicating that a memory access is being
done from user-mode (unprivileged). This corresponds to an equivalent
signal in ARM AMBA buses.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Factor out the page table walk memory accesses into their own function,
so that we can specify the correct S/NS memory attributes for them.
This will also provide a place to use the correct endianness and
handle the need for a stage-2 translation when virtualization is
supported.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Honour the NS bit in ARM page tables:
 * when adding entries to the TLB, include the Secure/NonSecure
   transaction attribute
 * set the NS bit in the PAR when doing ATS operations

Note that we don't yet correctly use the NSTable bit to
cause the page table walk itself to use the right attributes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.

A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.

===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/        /g' > out.patch
# patch -p1 < out.patch

for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@

ld${FN}_phys(E1->as,E2)

@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@

-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)

EOF

done

for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@

st${FN}_phys(E1->as,E2,E3)

@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@

-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)

EOF

done
===endit===
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Capture the memory attributes for the transaction which triggered
a watchpoint; this allows CPU specific code to implement features
like ARM's "user-mode only WPs also hit for LDRT/STRT accesses
made from privileged code". This change also correctly passes
through the memory attributes to the underlying device when
a watchpoint access doesn't hit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Add new address_space_ld*/st* functions which allow transaction
attributes and error reporting for basic load and stores. These
are named to be in line with the address_space_read/write/rw
buffer operations.

The existing ld/st*_phys functions are now wrappers around
the new functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Make address_space_rw take transaction attributes, rather
than always using the 'unspecified' attributes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Convert the subpage memory ops to _with_attrs; this will allow
us to pass the attributes through to the underlying access
functions. (Nothing uses the attributes yet.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Add a MemTxAttrs field to the IOTLB, and allow target-specific
code to set it via a new tlb_set_page_with_attrs() function;
pass the attributes through to the device when making IO accesses.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Make the CPU iotlb a structure rather than a plain hwaddr;
this will allow us to add transaction attributes to it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Rather than retaining io_mem_read/write as simple wrappers around
the memory_region_dispatch_read/write functions, make the latter
public and change all the callers to use them, since we need to
touch all the callsites anyway to add MemTxAttrs and MemTxResult
support. Delete io_mem_read and io_mem_write entirely.

(All the callers currently pass MEMTXATTRS_UNSPECIFIED
and convert the return value back to bool or ignore it.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Define an API so that devices can register MemoryRegionOps whose read
and write callback functions are passed an arbitrary pointer to some
transaction attributes and can return a success-or-failure status code.
This will allow us to model devices which:
 * behave differently for ARM Secure/NonSecure memory accesses
 * behave differently for privileged/unprivileged accesses
 * may return a transaction failure (causing a guest exception)
   for erroneous accesses

This patch defines the new API and plumbs the attributes parameter through
to the memory.c public level functions io_mem_read() and io_mem_write(),
where it is currently dummied out.

The success/failure response indication is also propagated out to
io_mem_read() and io_mem_write(), which retain the old-style
boolean true-for-error return.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Pretending that QMP doesn't understand a command merely because
we are not in the right mode doesn't help first-time users figure
out what to do to correct things.  Although the documentation for
QMP calls out capabilities negotiation, we should also make it
clear in our error messages what we were expecting.  With this
patch, I now get the following transcript:

$ ./x86_64-softmmu/qemu-system-x86_64 -qmp stdio -nodefaults
{"QMP": {"version": {"qemu": {"micro": 93, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{"execute":"huh"}
{"error": {"class": "CommandNotFound", "desc": "The command huh has not been found"}}
{"execute":"quit"}
{"error": {"class": "CommandNotFound", "desc": "Expecting capabilities negotiation with 'qmp_capabilities' before command 'quit'"}}
{"execute":"qmp_capabilities"}
{"return": {}}
{"execute":"qmp_capabilities"}
{"error": {"class": "CommandNotFound", "desc": "Capabilities negotiation is already complete, command 'qmp_capabilities' ignored"}}
{"execute":"quit"}
{"return": {}}
{"timestamp": {"seconds": 1429110729, "microseconds": 181935}, "event": "SHUTDOWN"}
Signed-off-by: NEric Blake <eblake@redhat.com>
Tested-By: NKashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: NPaulo Vital <paulo.vital@profitbricks.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

As far as the QMP parser is concerned, neither the 'O' nor the 'q' format specifiers
put any constraint on the command.  However, there are two differences:

1) from a documentation point of view 'O' says that this command takes
a dictionary.  The dictionary will be converted to QemuOpts in the
handler to match the corresponding HMP command.

2) 'O' sets QMP_ACCEPT_UNKNOWNS, resulting in the command accepting invalid
extra arguments.  For example the following is accepted:

   { "execute": "send-key",
        "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
                                 { "type": "qcode", "data": "alt" },
                                 { "type": "qcode", "data": "delete" } ], "foo": "bar" } }

Neither send-key nor migrate-set-capabilities take a QemuOpts-like
dictionary; they take an array of dictionaries.  And neither command
really wants to have extra unknown arguments.  Thus, the right
specifier to use in this case is 'q'; with this patch the above
command fails with

   {"error": {"class": "GenericError", "desc": "Invalid parameter 'foo'"}}

as intended.
Reported-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>