Signed-off-by: NDmitry Fleytman <dmitry@daynix.com>
Signed-off-by: NYan Vugenfirer <yan@daynix.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

net_checksum_add_cont()
checksum calculation for scattered data with odd chunk sizes

net_raw_checksum()
checksum calculation for a buffer
Signed-off-by: NDmitry Fleytman <dmitry@daynix.com>
Signed-off-by: NYan Vugenfirer <yan@daynix.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Reduce -netdev socket latency by disabling the Nagle algorithm on
SOCK_STREAM sockets in net/socket.c.  Since we are tunelling Ethernet
over TCP we shouldn't artificially delay outgoing packets, let the guest
decide packet scheduling.

I already get sub-millisecond -netdev socket ping times on localhost, so
there was no measurable difference in my testing.  This won't hurt
though and may improve remote socket performance.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Here's a fix for the build problem identified by Aurelien Jarno here:
http://lists.gnu.org/archive/html/qemu-devel/2013-03/msg04177.htmlSigned-off-by: NAnthony Green <green@moxielogic.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

We can compute the value in cpu_dump_state anyway, and gratuitous
modifications to eflags creates heisenbugs.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When starting from CC_OP_DYNAMIC, and issuing adox before adcx,
a typo used the wrong value for the resulting CC_OP.

Cc: Blue Swirl <blauwirbel@gmail.com>
Reported-by: NTorbjorn Granlund <tg@gmplib.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAnthony Green <green@moxielogic.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAnthony Green <green@moxielogic.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAnthony Green <green@moxielogic.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAnthony Green <green@moxielogic.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'for-upstream' of git://github.com/mwalle/qemu:
  configure: rename OpenGL feature to GLX
  configure: proper OpenGL/GLX probe
  target-lm32: use HELPER() macro
  target-lm32: flush tlb after clearing env
  target-lm32: remove dead code
  target-lm32: fix cmpgui and cmpgeui opcodes
  tests: tcg: lm32: add more test cases
  target-lm32: don't log cpu state in translation
  lm32_uart: fix receive buffering
  milkymist-uart: fix receive buffering
  lm32-dis: fix NULL pointer dereference
  target-lm32: fix debug memory access

* 'ppc-for-upstream' of git://github.com/agraf/qemu: (58 commits)
  target-ppc: Use NARROW_MODE macro for tlbie
  target-ppc: Use NARROW_MODE macro for addresses
  target-ppc: Use NARROW_MODE macro for comparisons
  target-ppc: Use NARROW_MODE macro for branches
  target-ppc: Fix add and subf carry generation in narrow mode
  target-ppc: Use QOM method dispatch for MMU fault handling
  target-ppc: Move ppc tlb_fill implementation into mmu_helper.c
  target-ppc: Split user only code out of mmu_helper.c
  mmu-hash64: Implement Virtual Page Class Key Protection
  mmu-hash*: Merge translate and fault handling functions
  mmu-hash*: Don't use full ppc_hash{32, 64}_translate() path for get_phys_page_debug()
  mmu-hash*: Correctly mask RPN from hash PTE
  mmu-hash*: Clean up real address calculation
  mmu-hash*: Clean up PTE flags update
  mmu-hash64: Factor SLB N bit into permissions bits
  mmu-hash*: Clean up permission checking
  mmu-hash32: Remove nx from context structure
  mmu-hash*: Don't update PTE flags when permission is denied
  mmu-hash32: Don't look up page tables on BAT permission error
  mmu-hash32: Cleanup BAT lookup
  ...

is_tcg_gen_code() checks the upper limit of TCG generated code range wrong, so
that TCG could get broken occasionally only when CONFIG_QEMU_LDST_OPTIMIZATION
enabled. The reason is code_gen_buffer_max_size does not cover the upper range
up to (TCG_MAX_OP_SIZE * OPC_BUF_SIZE), thus code_gen_buffer_max_size should be
modified to code_gen_buffer_size.

CC: qemu-stable@nongnu.org
Signed-off-by: NYeongkyoon Lee <yeongkyoon.lee@samsung.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

# By Kevin Wolf (12) and Peter Lieven (2)
# Via Kevin Wolf
* kwolf/for-anthony:
  nbd: Check against invalid option combinations
  nbd: Use default port if only host is specified
  block: Allow omitting the file name when using driver-specific options
  block: Make find_image_format safe with NULL filename
  block: Rename variable to avoid shadowing
  block: Introduce .bdrv_parse_filename callback
  nbd: Accept -drive options for the network connection
  nbd: Remove unused functions
  nbd: Keep hostname and port separate
  qemu-socket: Make socket_optslist public
  block: Pass bdrv_file_open() options to block drivers
  block: Add options QDict to bdrv_file_open() prototypes
  block: complete all IOs before resizing a device
  Revert "block: complete all IOs before .bdrv_truncate"

# By liguang (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
  qdev: remove redundant abort()
  gitignore: ignore more files
  Use proper term in TCG README
  serial: Fix debug format strings
  Fix typos and misspellings
  Advertise --libdir in configure --help output
  memory: fix a bug of detection of memory region collision
  MinGW: Replace setsockopt by qemu_setsocketopt

# By Cornelia Huck
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
  virtio-ccw, s390-virtio: Use generic virtio-blk macro.
  s390-virtio, virtio-ccw: Add config_wce for virtio-blk.
  virtio-ccw: Add missing blk chs properties.

A file name may only specified if no host or socket path is specified.
The latter two may not appear at the same time either.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

The URL method already takes care to apply the default port when none is
specfied. Directly specifying driver-specific options required the port
number until now. Allow leaving it out and apply the default.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

After this patch, using -drive with an empty file name continues to open
the file if driver-specific options are used. If no driver-specific
options are specified, the semantics stay as it was: It defines a drive
without an inserted medium.

In order to achieve this, bdrv_open() must be made safe to work with a
NULL filename parameter. The assumption that is made is that only block
drivers which implement bdrv_parse_filename() support using driver
specific options and could therefore work without a filename. These
drivers must make sure to cope with NULL in their implementation of
.bdrv_open() (this is only NBD for now). For all other drivers, the
block layer code will make sure to error out before calling into their
code - they can't possibly work without a filename.

Now an NBD connection can be opened like this:

  qemu-system-x86_64 -drive file.driver=nbd,file.port=1234,file.host=::1
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

In order to achieve this, the .bdrv_probe callbacks of all drivers must
cope with this. The DMG driver is the only one that bases its decision
on the filename and it needs to be changed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

bdrv_open() uses two different variables called options. Rename one of
them to avoid confusion and to allow the outer one to be accessed
everywhere.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

If a driver needs structured data and not just a string, it can provide
a .bdrv_parse_filename callback now that parses the command line string
into separate options. Keeping this separate from .bdrv_open_filename
ensures that the preferred way of directly specifying the options always
works as well if parsing the string works.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

The existing parsers for the file name now parse everything into the
bdrv_open() options QDict. Instead of using these parsers, you can now
directly specify the options on the command line, like this:

    qemu-system-x86_64 -drive file=nbd:,file.port=1234,file.host=::1

Clearly the file=... part could use further improvement, but it's a
start.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

The NBD block supports an URL syntax, for which a URL parser returns
separate hostname and port fields. It also supports the traditional qemu
syntax encoded in a filename. Until now, after parsing the URL to get
each piece of information, a new string is built to be fed to socket
functions.

Instead of building a string in the URL case that is immediately parsed
again, parse the string in both cases and use the QemuOpts interface to
qemu-sockets.c.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Allow other users to create the QemuOpts needed for inet_connect_opts().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Specify -drive file.option=... on the command line to pass the option to
the protocol instead of the format driver.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

The new parameter is unused yet.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

this patch ensures that all pending IOs are completed
before a device is resized. this is especially important
if a device is shrinked as it the bdrv_check_request()
result is invalidated.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

brdv_truncate() is also called from readv/writev commands on self-
growing file based storage. this will result in requests waiting
for theirselves to complete.

This reverts commit 9a665b2b.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

ignore *.patch, *.gcda, *.gcno
Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

  In TCG, "target" means the host architecture for which TCG generates
the code. Using "guest" rather than "target" to make the document more
consistent.
Signed-off-by: NChen Wei-Ren <chenwj@iis.sinica.edu.tw>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Removing conditional compilation in the process.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Removing conditional compilation in the process.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Removing conditional compilation in the process.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Removing conditional compilation in the process.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The set of computations used in b5a73f8d
are only valid if the current word size == target_long size.  This failed
to take ppc64 in 32-bit (narrow) mode into account.

Add a NARROW_MODE macro to avoid conditional compilation.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

After previous cleanups, the many scattered checks of env->mmu_model in
the ppc MMU implementation have, at least for "classic" hash MMUs been
reduced (almost) to a single switch at the top of
cpu_ppc_handle_mmu_fault().

An explicit switch is still a pretty ugly way of handling this though.  Now
that Andreas Färber's CPU QOM cleanups for ppc have gone in, it's quite
straightforward to instead make the handle_mmu_fault function a QOM method
on the CPU object.

This patch implements such a scheme, initializing the method pointer at
the same time as the mmu_model variable.  We need to keep the latter around
for now, because of the MMU types (BookE, 4xx, et al) which haven't been
converted to the new scheme yet, and also for a few other uses.  It would
be good to clean those up eventually.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>