Signed-off-by: NHani Benhabiles <hani@linux.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NHani Benhabiles <hani@linux.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NHani Benhabiles <hani@linux.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Export chr_is_ringbuf() function. Also remove left-over function prototypes
while at it.
Signed-off-by: NHani Benhabiles <hani@linux.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

We can (and should) rely on the fact that s->flag_compress is exactly one
of DUMP_DH_COMPRESSED_ZLIB, DUMP_DH_COMPRESSED_LZO, and
DUMP_DH_COMPRESSED_SNAPPY.

This is ensured by the QMP schema and dump_init() in combination.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

qmp_dump_guest_memory()
  dump_init()
    lzo_init() <---------+
  create_kdump_vmcore()  |
    write_dump_pages()   |
      get_len_buf_out()  |
        lzo_init() ------+

This patch doesn't change the fact that lzo_init() is called for every
LZO-compressed dump, but it makes get_len_buf_out() more focused (single
responsibility).
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The specific ELF architecture (d_machine) carries Too Much Information
(TM) for deciding between create_header32() and create_header64(), use
"d_class" instead (ELFCLASS32 vs. ELFCLASS64).

This change adapts write_dump_header() to write_elf_loads(), dump_begin()
etc. that also rely on the ELF class of the target for bitness selection.

Considering the current targets that support dumping, cpu_get_dump_info()
works as follows:
- target-s390x/arch_dump.c: (EM_S390, ELFCLASS64) only
- target-ppc/arch_dump.c (EM_PPC64, ELFCLASS64) only
- target-i386/arch_dump.c: sets (EM_X86_64, ELFCLASS64) vs. (EM_386,
  ELFCLASS32) keying off the same Long Mode Active flag.

Hence no observable change.
Approximately-suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Use TARGET_PAGE_SIZE and ~TARGET_PAGE_MASK instead.

"DumpState.page_size" has type "size_t", whereas TARGET_PAGE_SIZE has type
"int". TARGET_PAGE_MASK is of type "int" and has negative value. The patch
affects the implicit type conversions as follows:

- create_header32() and create_header64(): assigned to "block_size", which
  has type "uint32_t". No change.

- get_next_page(): "block->target_start", "block->target_end" and "addr"
  have type "hwaddr" (uint64_t).

  Before the patch,
  - if "size_t" was "uint64_t", then no additional conversion was done as
    part of the usual arithmetic conversions,
  - If "size_t" was "uint32_t", then it was widened to uint64_t as part of
    the usual arithmetic conversions,
  for the remainder and addition operators.

  After the patch,
  - "~TARGET_PAGE_MASK" expands to  ~~((1 << TARGET_PAGE_BITS) - 1). It
    has type "int" and positive value (only least significant bits set).
    That's converted (widened) to "uint64_t" for the bit-ands. No visible
    change.
  - The same holds for the (addr + TARGET_PAGE_SIZE) addition.

- write_dump_pages():
  - TARGET_PAGE_SIZE passed as argument to a bunch of functions that all
    have prototypes. No change.

  - When incrementing "offset_data" (of type "off_t"): given that we never
    build for ILP32_OFF32 (see "-D_FILE_OFFSET_BITS=64" in configure),
    "off_t" is always "int64_t", and we only need to consider:
    - ILP32_OFFBIG: "size_t" is "uint32_t".
      - before: int64_t += uint32_t. Page size converted to int64_t for
        the addition.
      - after:  int64_t += int32_t. No change.
    - LP64_OFF64: "size_t" is "uint64_t".
      - before: int64_t += uint64_t. Offset converted to uint64_t for the
        addition, then the uint64_t result is converted to int64_t for
        storage.
      - after:  int64_t += int32_t. Same as the ILP32_OFFBIG/after case.
        No visible change.

  - (size_out < s->page_size) comparisons, and (size_out = s->page_size)
    assignment:
    - before: "size_out" is of type "size_t", no implicit conversion for
              either operator.
    - after: TARGET_PAGE_SIZE (of type "int" and positive value) is
             converted to "size_t" (for the relop because the latter is
             one of "uint32_t" and "uint64_t"). No visible change.

- dump_init():
  - DIV_ROUND_UP(DIV_ROUND_UP(s->max_mapnr, CHAR_BIT), s->page_size): The
    innermost "DumpState.max_mapnr" field has type uint64_t, which
    propagates through all implicit conversions at hand:

    #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))

    regardless of the page size macro argument's type. In the outer macro
    replacement, the page size is converted from uint32_t and int32_t
    alike to uint64_t.

  - (tmp * s->page_size) multiplication: "tmp" has size "uint64_t"; the
    RHS is converted to that type from uint32_t and int32_t just the same
    if it's not uint64_t to begin with.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Just use TARGET_PAGE_BITS.

"DumpState.page_shift" used to have type "uint32_t", while the replacement
TARGET_PAGE_BITS has type "int". Since "DumpState.page_shift" was only
used as bit shift counts in the paddr_to_pfn() and pfn_to_paddr() macros,
this is safe.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Currently, the function
- defines and populates an auto variable of type MakedumpfileHeader
- allocates and zeroes a buffer of size MAX_SIZE_MDF_HEADER (4096)
- copies the former into the latter (covering an initial portion of the
  latter)

Fill in the MakedumpfileHeader structure in its final place (the alignment
is OK because the structure lives at the address returned by g_malloc0()).
Approximately-suggested-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The "mh.signature" array field has size 16, and is zeroed by the preceding
memset(). MAKEDUMPFILE_SIGNATURE expands to a string literal with string
length 12 (size 13). There's no need to measure the length of
MAKEDUMPFILE_SIGNATURE at runtime, nor for the extra zero-filling of
"mh.signature" with strncpy().

Use memcpy() with MIN(sizeof, sizeof) for robustness (which is an integer
constant expression, evaluable at compile time.)
Approximately-suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

trivial patches for 2014-06-10

# gpg: Signature made Tue 10 Jun 2014 17:07:19 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-06-10: (25 commits)
  virtio.c: fix error message
  hw: vmware_vga: don't return cursorx when the driver asks for cursory register
  migration: Plug memory leak in migrate-set-cache-size command
  libcacard: Clean up dead stores before g_free()
  libcacard: Drop superfluous conditionals around g_free()
  cpu/x86: correctly set errors in x86_cpu_parse_featurestr
  smbios: use g_free directly on NULL pointers
  vdi: remove double conversion
  apb: Fix compiler warnings (large constants)
  hw/net/ne2000-isa: Register vmstate struct
  target-microblaze: Delete unused sign_extend() function
  hw/misc/milkymist-softusb: Remove unused softusb_{read, write}_pmem()
  target-i386/translate.c: Remove unused tcg_gen_lshift()
  hw/isa/pc87312: Remove unused function is_parallel_epp()
  hw/intc/openpic: Remove unused function IRQ_testbit()
  hw/dma/xilinx_axidma: Remove unused stream_halted() function
  util/qemu-sockets.c: Avoid unused variable warnings
  hw/sd/sd.c: Drop unused sd_acmd_type[] array
  hw/i386/pc.c: Remove unused parallel_io and parallel_irq variables
  slirp: Remove unused zero_ethaddr[] variable
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

hello qemu-*@nongnu.org, this is my first contribution. apologies if
something is incorrect.

this patch fixes vmware_vga.c so that it actually returns the cursory
register when asked for, instead of cursorx.
Signed-off-by: NNicolas Owens <mischief@offblast.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

We call g_free() after cache_fini() in migration_end(), but we don't
call it after cache_fini() in xbzrle_cache_resize(), leaking the
memory.

cache_init() and cache_fini() are a pair.  Since cache_init()
allocates the cache, let cache_fini() free it.  This plugs the leak.
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Because of the "goto out", the contents of local_err are leaked
and lost.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

No need to wrap it with an if.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This should be a problem when running on big-endian machines.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Both constants need more than 32 bit.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The ne2000-isa device defines a VMState struct for migration, but
we forgot to actually register it. Correct this deficiency by
setting dc->vmsd.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The sign_extend() function is unused; delete it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The functions softusb_read_pmem() and softusb_write_pmem() are unused;
remove them.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The function tcg_gen_lshift() is unused; remove it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The function is_parallel_epp() is unused; remove it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The IRQ_testbit() function is never used; remove it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The stream_halted() function is never used; remove it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The 'on' variable is never used, and 'off' is only used
if IPV6_V6ONLY is defined; delete 'on' and move 'off' to
the point where it is used. This avoids warnings from
clang 3.4.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Drop the sd_acmd_type[] array: it is never used. (The equivalent
sd_cmd_type[] array for normal commands is used to identify
those commands whose argument includes the card address in the
top 16 bits; but for app commands the card address is passed
with the APP_CMD prefix, not with the argument to the app command
itself.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The variables parallel_io and parallel_irq are unused; delete them.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The zero_ethaddr[] array is never used; delete it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Just use desc instead.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Fix some typos in comments.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Add a debug printf for TX descriptor fetching. This is helpful to anyone
needing to debug TX ring buffer traversal. It is also now consistent with
the RX code which has a similar printf.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The local variable "desc" was being used to read-modify-write the
first descriptor (of a multi-desc packet) upon packet completion.
desc however continues to be used by the code as the current
descriptor. Give this first desc RMW it's own local variable to
avoid trampling.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

console: two little bugfixes.

# gpg: Signature made Tue 10 Jun 2014 12:01:07 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-console-20140610-1:
  console: fix -vga none -sdl crash
  console: kill MAX_CONSOLES, alloc consoles dynamically
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Call get_alloc_displaystate() for proper initialization
instead of allocating with g_new().
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>