Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

No need to open-code the setup of the builtin helpers.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Rather than special casing them, use the standard mechanisms
for tcg helper generation.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Rather than include helper.h with N values of GEN_HELPER, include a
secondary file that sets up the macros to include helper.h.  This
minimizes the files that must be rebuilt when changing the macros
for file N.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

If either the high or low pair can be resolved, we can
simplify to either a constant or to a 32-bit comparison.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Block pull request

# gpg: Signature made Wed 28 May 2014 13:31:15 BST using RSA key ID 81AB73C8
# gpg: Can't check signature: public key not found

* remotes/stefanha/tags/block-pull-request: (33 commits)
  block/sheepdog: Don't use qerror_report()
  block/sheepdog: Fix silent sd_open(), sd_create() failures
  block/sheepdog: Propagate errors to open and create methods
  block/sheepdog: Propagate errors through find_vdi_name()
  block/sheepdog: Propagate errors through do_sd_create()
  block/sheepdog: Propagate errors through sd_prealloc()
  block/sheepdog: Propagate errors through get_sheep_fd()
  block/sheepdog: Propagate errors through connect_to_sdog()
  block/vvfat: Propagate errors through init_directories()
  block/vvfat: Propagate errors through enable_write_target()
  block/ssh: Propagate errors to open and create methods
  block/ssh: Propagate errors through connect_to_ssh()
  block/ssh: Propagate errors through authenticate()
  block/ssh: Propagate errors through check_host_key()
  block/ssh: Drop superfluous libssh2_session_last_errno() calls
  block/rbd: Propagate errors to open and create methods
  qemu-nbd: Don't use qerror_report()
  blockdev: Don't use qerror_report() in do_drive_del()
  blockdev: Don't use qerror_report_err() in drive_init()
  docs: Define refcount_bits value
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm:
 * Preliminary restructuring for EL2/EL3 support
 * improve CPACR handling
 * fix pxa2xx_lcd palette formats
 * update highbank/midway maintainer

# gpg: Signature made Tue 27 May 2014 17:26:27 BST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found

* remotes/pmaydell/tags/pull-target-arm-20140527: (26 commits)
  target-arm: A64: Register VBAR_EL3
  target-arm: A64: Register VBAR_EL2
  target-arm: Make vbar_write writeback to any CPREG
  target-arm: A64: Generalize update_spsel for the various ELs
  target-arm: A64: Generalize ERET to various ELs
  target-arm: A64: Trap ERET from EL0 at translation time
  target-arm: A64: Forbid ERET to higher or unimplemented ELs
  target-arm: Register EL3 versions of ELR and SPSR
  target-arm: Register EL2 versions of ELR and SPSR
  target-arm: Add a feature flag for EL3
  target-arm: Add a feature flag for EL2
  target-arm: A64: Introduce aarch64_banked_spsr_index()
  target-arm: Add SPSR entries for EL2/HYP and EL3/MON
  target-arm: A64: Add ELR entries for EL2 and 3
  target-arm: A64: Add SP entries for EL2 and 3
  target-arm: c12_vbar -> vbar_el[]
  target-arm: Make esr_el1 an array
  target-arm: Make elr_el1 an array
  target-arm: Use a 1:1 mapping between EL and MMU index
  target-arm: A32: Use get_mem_index for load/stores
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Xtensa fixes queue 2014-05-26:
- fix cross-page jumps/calls at the end of TB;
- add tests for TBs and instructions crossing page boundary.

# gpg: Signature made Mon 26 May 2014 09:37:39 BST using RSA key ID F83FA044
# gpg: Can't check signature: public key not found

* remotes/xtensa/tags/20140526-xtensa:
  target-xtensa: add tests for cross-page TB
  target-xtensa: completely clean TLB between MMU tests
  target-xtensa: fix cross-page jumps/calls at the end of TB
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb: usb3 streams support for usb-host and usb-redir
usb: xhci and mtp bugfixes.

# gpg: Signature made Mon 26 May 2014 09:44:09 BST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* remotes/kraxel/tags/pull-usb-7:
  usb-host-libusb: Set stream id when submitting bulk-stream transfers
  usb-host-libusb: Add alloc / free streams ops
  usb-host-libusb: Fill in endpoint max_streams when available
  usb-redir: Add support for bulk streams
  usb-mtp: handle usb_mtp_get_object failure
  usb-mtp: handle lseek failure
  usb-mtp: use bool to track MTPObject init status
  xhci: add xhci_get_flag
  xhci: add endpoint cap on express bus only
  xhci: child detach fix
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP.  It should not be used elsewhere.
Replace by error_report().

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Open and create methods must set an error when they fail.

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Completes the conversion to Error started in commit 015a1036^..d5124c00,
except for a few bugs fixed in the next commit.

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Completes the conversion of the open method to Error started in commit
015a1036.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Continues the conversion of the open method to Error started in commit
015a1036.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Completes the conversion to Error started in commit 015a1036^..d5124c00.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

libssh2_session_last_error() already returns the error code.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Completes the conversion to Error started in commit 015a1036^..d5124c00.

Cc: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP.  It should not be used elsewhere.
Replace by error_report().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP.  It should not be used elsewhere.

do_drive_del() is an HMP command that won't be converted to QMP (we'll
create a new QMP command instead).  It uses both qerror_report() and
error_report().  Convert the former to the latter.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

qerror_report_err() is a transitional interface to help with
converting existing HMP commands to QMP.  It should not be used
elsewhere.

drive_init() is not meant to be used by QMP commands.  It uses both
qerror_report_err() and error_report().  Convert the former to the
latter.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The 'refcount_bits' term used in the description of refcount block entry is
not defined in the specification. The definition is added in the
'refcount_order' section where refcount_bits was used as 'width in bits'.
Signed-off-by: NMaria Kustova <maria.k@catit.be>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The above bdrv_set_backing_hd already does this.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This makes use of op_blocker and blocks all the operations except for
commit target, on each BlockDriverState->backing_hd.

The asserts for op_blocker in bdrv_swap are removed because with this
change, the target of block commit has at least the backing blocker of
its child, so the assertion is not true. Callers should do their check.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We need to handle the coming backing_blocker properly, so don't open
code the assignment, instead, call bdrv_set_backing_hd to change
backing_hd.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This is the common but non-trivial steps to assign or change the
backing_hd of BDS.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

It makes no sense to check for "any" blocker on bs, we are here only
because of the mechanical conversion from in_use to op_blockers. Remove
it now, and let the callers check specific operation types. Backup and
mirror already have it, add checker to stream and commit.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This drops BlockDriverState.in_use with op_blockers:

  - Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).

  - Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).

  - Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).

    The specific types are used, e.g. in place of starting block backup,
    bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).

    There is one exception in block_job_create, where
    bdrv_op_blocker_is_empty() is used, because we don't know the operation
    type here. This doesn't matter because in a few commits away we will drop
    the check and move it to callers that _do_ know the type.

  - Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).

Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

BlockDriverState.op_blockers is an array of lists with BLOCK_OP_TYPE_MAX
elements. Each list is a list of blockers of an operation type
(BlockOpType), that marks this BDS as currently blocked for a certain
type of operation with reason errors stored in the list. The rule of
usage is:

 * BDS user who wants to take an operation should check if there's any
   blocker of the type with bdrv_op_is_blocked().

 * BDS user who wants to block certain types of operation, should call
   bdrv_op_block (or bdrv_op_block_all to block all types of operations,
   which is similar to the existing bdrv_set_in_use()).

 * A blocker is only referenced by op_blockers, so the lifecycle is
   managed by caller, and shouldn't be lost until unblock, so typically
   a caller does these:

   - Allocate a blocker with error_setg or similar, call bdrv_op_block()
     to block some operations.
   - Hold the blocker, do his job.
   - Unblock operations that it blocked, with the same reason pointer
     passed to bdrv_op_unblock().
   - Release the blocker with error_free().
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds the enum of all the operations that can be taken on a block
device.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Currently, test 089 uses $QEMU_IMG info manually in order to obtain the
according output. However, the iotests should generally use _img_info as
this filters out more irrelevant information such as the host image size
or format specific information. Therefore, test 089 should use _img_info
as well.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reported-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The current flow of canceling a thread from THREAD_ACTIVE state is:

  1) Caller wants to cancel a request, so it calls thread_pool_cancel.

  2) thread_pool_cancel waits on the conditional variable
     elem->check_cancel.

  3) The worker thread changes state to THREAD_DONE once the task is
     done, and notifies elem->check_cancel to allow thread_pool_cancel
     to continue execution, and signals the notifier (pool->notifier) to
     allow callback function to be called later. But because of the
     global mutex, the notifier won't get processed until step 4) and 5)
     are done.

  4) thread_pool_cancel continues, leaving the notifier signaled, it
     just returns to caller.

  5) Caller thinks the request is already canceled successfully, so it
     releases any related data, such as freeing elem->common.opaque.

  6) In the next main loop iteration, the notifier handler,
     event_notifier_ready, is called. It finds the canceled thread in
     THREAD_DONE state, so calls elem->common.cb, with an (likely)
     dangling opaque pointer. This is a use-after-free.

Fix it by calling event_notifier_ready before leaving
thread_pool_cancel.

Test case update: This change will let cancel complete earlier than
test-thread-pool.c expects, so update the code to check this case: if
it's already done, done_cb sets .aiocb to NULL, skip calling
bdrv_aio_cancel on them.
Reported-by: NUlrich Obergfell <uobergfe@redhat.com>
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This triggers if bs->drv becomes NULL in a concurrent request. This is
currently only the case when corruption prevention kicks in (i.e. at
most once per image, and after that it produces I/O errors).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>