Currently the Makefile of disas/libvixl appends
-I$(SRC_PATH)/disas/libvixl to QEMU_CFLAGS. As a consequence C++ files
that #include "utils.h", such as disas/libvixl/a64/instructions-a64.cc,
are going to look for utils.h on all the other include paths first.

When building QEMU as part of the Xen make system, another unrelated
utils.h file is going to be chosen for inclusion, causing a build
failure:

In file included from disas/libvixl/a64/instructions-a64.cc:27:0:
/qemu/disas/libvixl/a64/instructions-a64.h:88:64: error:
'rawbits_to_float' was not declared in this scope
 const float kFP32PositiveInfinity = rawbits_to_float(0x7f800000);

Fix the problem by prepending (rather than appending) the libvixl
include path to QEMU_CFLAGS.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Patch queue for ppc - 2014-07-08

A few bug fixes for 2.1:

  - Fix e500* TLB emulation with qemu-system-ppc
  - Update SLOF to current upstream (good number of bugfixes)
  - Make POWER7 / POWER8 PVR match more agnostic (needed in 2.1 for cmdline compat)
  - Fix u-boot.e500 install (how did that happen?)
  - Fix H_CAS on LE hosts
  - ppc64le-linux-user fixes

# gpg: Signature made Tue 08 Jul 2014 11:18:58 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

* remotes/agraf/tags/signed-ppc-for-upstream:
  PPC: e500: Actually install u-boot.e500
  target-ppc: Remove POWER7+ and POWER8E families
  target-ppc: Add pvr_match() callback
  pseries: Update SLOF firmware image to qemu-slof-20140630
  PPC: Fix booke206 TLB with phys addrs > 32bit
  target-ppc: Fix gdbstub for ppc64le-linux-user
  target-ppc: Change default cpu for ppc64le-linux-user
  target-ppc: KVMPPC_H_CAS fix cpu-version endianess
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

POWER8E is architecturally equal to POWER8 and POWER7+ is equal to
POWER7. Also no user space tool makes any difference for CPU node name
in the device tree (such as PowerPC,POWER7@0 vs. PowerPC,POWER7+@0).
So there is no point in emulating POWER7+ and POWER8E apart from POWER7
and POWER8. Also, the previos patch implemented multiple PVR mask support
per CPU class so POWER7 class now covers both POWER7 and POWER7+ CPUs,
same is valid for POWER8/8E.

This removes POWER7+ and POWER8E classes. This replaces references
to POWER7P/POWER8E families with POWER7/POWER8 families.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

So far it was enough to have a base PVR value and mask per CPU
family such as POWER7 or POWER8. However there CPUs which are
completely architecturally compatible but have different PVRs such
as POWER7/POWER7+ and POWER8/POWER8E. For these CPUs, top 16 bits
are CPU family and low 16 bits are the version. The families have
PVR base values different enough so defining a mask which
would cover both (or potentially more) CPUs within the family is
not possible.

This adds a pvr_match() callback to PowerPCCPUClass. The default
handler simply compares PVR defined in the class.

This implements ppc_pvr_match_power7/ppc_pvr_match_power8 callbacks
for POWER7/8 families. These check for POWER7/POWER7+ and POWER8/POWER8E.

This changes ppc_cpu_compare_class_pvr_mask() not to check masks but
use the pvr_match() callback.

Since all server CPUs use the same mask, this defines one mask
value - CPU_POWERPC_POWER_SERVER_MASK - which is used everywhere now.
This removes other mask definitions.

This removes pvr_mask from PowerPCCPUClass as it is not used anymore.
This removes pvr initialization for POWER7/8 families as it is not used
to find the class, the pvr_match() callback is used instead.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The changelog is:
  > Quieten the grub warning
  > Add boot menu support
  > boot from disk having chrp-boot file
  > fat16: fix read and remove debug messages
  > dhcparch define missing in compilation
  > pci-scan: reserve memory for pci-bridge without devices
  > pci-bridge: Fix ranges when no device beyond the bridge
  > Set dhcp arch in board-qemu config file
  > xhci: fix controller stop
  > dhcp: support client architecture code 93
  > virtio-blk: support variable block size
  > usb: use common pci dma alloc/mapping routines
  > Remove unused SLOF code
  > pci-bridge: generic bridge needs to support pci dma functions
  > pci: extract dma functions as separate file
  > e1000: fix usage of multiple nics
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

We were truncating physical addresses to 32bit when using qemu-system-ppc
with a booke206 TLB implementation. This patch fixes that and makes the full
address space available.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The bswap that's needed for system mode isn't required for
user mode, and in fact breaks debugging.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
[agraf: fix apple gdbstub implementation]
Signed-off-by: NAlexander Graf <agraf@suse.de>

The default, 970fx, doesn't support MSR_LE.  So even though we set LE in
ppc_cpu_reset, it gets cleared again in hreg_store_msr.  Error out if a
user-selected cpu model doesn't support LE.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
[agraf: switch to POWER7 as default for BE and LE]
Signed-off-by: NAlexander Graf <agraf@suse.de>

During KVMPPC_H_CAS processing, the cpu-version updated value is stored
without taking care of the current endianess. As a consequence, the guest
may not switch to the right CPU model, leading to unexpected results.

If needed, the value is now converted.

Fixes: 6d9412ea ("target-ppc: Implement "compat" CPU option")
Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

PowerPC Reference Platform (PReP)

* Update OpenHack'Ware firmware to replace QEMU-side workarounds

# gpg: Signature made Mon 07 Jul 2014 15:49:42 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/prep-for-2.1:
  prep: Update ppc_rom.bin
  prep: Remove CPU reset entry point hack related to OpenHack'Ware
  prep: Remove PCI memory hack related to OpenHack'Ware
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pc,vhost,virtio fixes, test

Bugfixes all over the place.

There's a  non bugfix here: re-enabling the vhost-user test,
though the patch just brings back functionality that
I disabled earlier to fix mingw build failures.
This is now sorted, and keeping the unit test enabled
seems important since the feature relies on an external
server to work, so isn't easy to test.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 06 Jul 2014 11:01:35 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  qemu-char: add chr_add_watch support in mux chardev
  virtio-pci: fix MSI memory region use after free
  qdev: Fix crash when using non-device class name on -global
  qdev: Don't abort() in case globals can't be set
  hw/virtio: enable common virtio feature for mmio device
  acpi: fix typo in memory hotplug MMIO region name
  pci: assign devfn to pci_dev before calling pci_device_iommu_address_space()
  Handle G_IO_HUP in tcp_chr_read for tcp chardev
  virtio: move common virtio properties to bus class device
  pc-dimm: error out if memory hotplug is not enabled
  numa: check for busy memory backend
  qtest: enable vhost-user-test
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This replaces QEMU-side workarounds for PCI BARs and CPU reset.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

Block pull request

# gpg: Signature made Mon 07 Jul 2014 13:27:20 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  qmp: show QOM properties in device-list-properties
  dataplane: submit I/O as a batch
  linux-aio: implement io plug, unplug and flush io queue
  block: block: introduce APIs for submitting IO as a batch
  ahci: map memory via device's address space instead of address_space_memory
  raw-posix: Fix raw_getlength() to always return -errno on error
  qemu-iotests: Disable Quorum testing in 041 when Quorum is not builtin
  ahci.c: mask unused flags when reading size PRDT DBC
  MAINTAINERS: add Stefan Hajnoczi to IDE maintainers
  mirror: Fix qiov size for short requests
  Fix nocow typos in manpage
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/sstabellini/xen_arm_20140707:
  xen: build on ARM
  xen_backend: introduce xenstore_read_uint64 and xenstore_read_fe_uint64
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Collection of fixes to build QEMU with Xen support on ARM:
- use xenstore_read_fe_uint64 to retrieve the page-ref (xenfb);
- use xen_pfn_t instead of unsigned long in xenfb;
- unsigned long/xenpfn_t in xen_remove_from_physmap;
- in xen-mapcache.c use HOST_LONG_BITS to check for QEMU's address space
size.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

Devices can use a mix of qdev and QOM properties.  Currently only the
qdev properties are displayed by device-list-properties.

This patch extends the property enumeration algorithm to also display
QOM properties (excluding the implicit "type", "realized",
"hotpluggable", and "parent_bus" properties).

When a qdev property exists, use the qdev type name to preserve
backwards compatibility.  QOM type names can be different for bool (qdev
on/off) and str (used by qdev pointers).
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Before commit 580b6b2a(dataplane: use the QEMU block
layer for I/O), dataplane for virtio-blk submits block
I/O as a batch.

This commit 580b6b2a replaces the custom linux AIO
implementation(including submit I/O as a batch) with QEMU
block layer, but this commit causes ~40% throughput regression
on virtio-blk performance, and removing submitting I/O
as a batch is one of the causes.

This patch applies the newly introduced bdrv_io_plug() and
bdrv_io_unplug() interfaces to support submitting I/O
at batch for Qemu block layer, and in my test, the change
can improve throughput by ~30% with 'aio=native'.

Following my fio test script:

	[global]
	direct=1
	size=4G
	bsrange=4k-4k
	timeout=40
	numjobs=4
	ioengine=libaio
	iodepth=64
	filename=/dev/vdc
	group_reporting=1

	[f]
	rw=randread

Result on one of my small machine(host: x86_64, 2cores, 4thread, guest: 4cores):
	- qemu master: 65K IOPS
	- qemu master with these patches: 92K IOPS
	- 2.0.0 release(dataplane using custom linux aio): 104K IOPS
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch implements .bdrv_io_plug, .bdrv_io_unplug and
.bdrv_flush_io_queue callbacks for linux-aio Block Drivers,
so that submitting I/O as a batch can be supported on linux-aio.

[Unprocessed requests are completed with -EIO instead of a bogus ret
value.
--Stefan]
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch introduces three APIs so that following
patches can support queuing I/O requests and submitting them
as a batch for improving I/O performance.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

In map_page() in hw/ide/ahci.c, replace cpu_physical_memory_map() and
cpu_physical_memory_unmap() with dma_memory_map() and dma_memory_unmap(),
because ahci devices should not access memory directly but via their address
space. Add an AddressSpace parameter to map_page(). In order to call
map_page(), we should pass the AHCIState.as as the AddressSpace argument.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We got a merry mix of -1 and -errno here.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This avoid breaking tests on RHEL6 where gnutls is too old for quorum to be
built by default.
Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The data byte count(DBC) read from the description information is defined for
bits 21:00. Bits 30:22 are reserved and bit 31 is the Interrupt on Completion
(I) flag.

Completion interrupts are triggered after every transaction instead of on
I-flag in QEMU. tbl_entry_size is a signed integer and improperly reading the
DBC leads to a negative offset that causes sglist allocation to fail.
Signed-off-by: NReza Jelveh <reza.jelveh@tuhh.de>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Make Stefan officially co-maintain hw/ide/ with Kevin.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>

When mirroring an image of a size that is not a multiple of the
mirror job granularity, the last request would have the right nb_sectors
argument, but a qiov that is rounded up to the next multiple of the
granularity. Don't do this.

This fixes a segfault that is caused by raw-posix being confused by this
and allocating a buffer with request length, but operating on it with
qiov length.

[s/Driver/Drive/ in qemu-iotests 041 as suggested by Eric
--Stefan]
Reported-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Tested-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Forward chr_add_watch call from mux chardev to underlying
implementation.

This should fix bug #1335444
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

After memory region QOMification QEMU is stricter in detecting
wrong usage of the memory region API.  Here it detected a
memory_region_destroy done before the corresponding
memory_region_del_subregion; the memory_region_destroy is
done by msix_uninit_exclusive_bar, the memory_region_del_subregion
is done by the PCI core's pci_unregister_io_regions before
pc->exit is called.

The problem was introduced by
commit 06a13073
    virtio-pci: add device_unplugged callback
As noted in that commit log, virtio device kick callbacks need to be
stopped before generic virtio is cleaned up. This is because these are
notifications from pci proxy to the generic virtio device so they need
to be stopped in the unplug call before the virtio device is unrealized.
However interrupts are notifications from the virtio device to
the pci proxy so they need to stay around while the device
is realized.

The memory API misuse caused an assertion when hot-unplugging virtio
devices.  Using the API correctly fixes the assertion.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This fixes the following crash:

    $ qemu-system-x86_64 -global container.xxx=y
    hw/core/qdev-properties-system.c:399:qdev_add_one_global: Object 0x7f7eff234100 is not an instance of type device
    Aborted (core dumped)

New behavior will be to just warn, just like when non-existing clas
names are used:

    $ qemu-system-x86_64 -global container.xxx=y
    qemu-system-x86_64: Warning: "-global container.xxx=y" not used
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Tested-by: NDon Slutz <dslutz@verizon.com>

It would be much better if we didn't terminate QEMU inside
device_post_init(), but at least exiting cleanly is better than aborting
and dumping core.

Before this patch:

    $ qemu-system-x86_64 -global cpu.xxx=y
    qemu-system-x86_64: Property '.xxx' not found
    Aborted (core dumped)

After this patch:

    $ qemu-system-x86_64 -global cpu.xxx=y
    qemu-system-x86_64: Property '.xxx' not found
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-By: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Both 'indirect_desc' and 'event_idx' are bus independent features,
and they should be enabled for mmio devices too.

On arm64 quad core VM(qemu-kvm), the patch can increase block I/O
performance a lot with latest linux tree:
        - without the patch: 14K IOPS
        - with the patch: 34K IOPS

fio script:
        [global]
        direct=1
        bsrange=4k-4k
        timeout=10
        numjobs=4
        ioengine=libaio
        iodepth=64

        filename=/dev/vdc
        group_reporting=1

        [f1]
        rw=randread

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Reported-by: NSergey Fionov <fionov@gmail.com>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

In function do_pci_register_device() in file hw/pci/pci.c, move the assignment
of pci_dev->devfn to the position before the call to
pci_device_iommu_address_space(pci_dev) which will use the value of
pci_dev->devfn.

Fixes: 9eda7d37
    pci: Introduce helper to retrieve a PCI device's DMA address space

Cc: qemu-stable@nongnu.org
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Since commit cdaa86a5
("Add G_IO_HUP handler for socket chardev")
GLib limitation results in a bug on Windows host. Steps to reproduce:

Start qemu: qemu-system-i386 -qmp tcp:127.0.0.1:4444:server:nowait
Connect with telnet: telnet 127.0.0.1 4444
Try sending some data from telnet.
Expected result: answers from QEMU.
Observed result: no answers (actually tcp_chr_read is not called at all).

Due to GLib limitations it is not possible to create several watches on one
channel on Windows hosts. See bug #338943 in GNOME bugzilla for details:
https://bugzilla.gnome.org/show_bug.cgi?id=338943

This reimplements commit cdaa86a5
("Add G_IO_HUP handler for socket chardev") using a single watch:

Handle G_IO_HUP in tcp_chr_read instead. It is already watched by a
corresponding watch.  Remove the second watch with its handler.

Cc: Antonios Motakis <a.motakis@virtualopensystems.com>
Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: NNikita Belov <zodiac@ispras.ru>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The two common virtio features can be defined per bus, so move all
into bus class device to make code more clean.

As discussed with cornelia, s390-virtio-blk doesn't support
the two features at all, so keep s390-virtio as it.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> #for s390 ccw
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

MST: rebase and resolve conflicts

fixes QEMU abort in case it's started without memory
hotplug enabled.

as result of fix it will print following messages:
"
-device pc-dimm,id=d1,memdev=m1: memory hotplug is not enabled, enable it on startup
-device pc-dimm,id=d1,memdev=m1: Device 'pc-dimm' could not be initialized
"

Also fixup assert condition to detect hotplug address
space overflow.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reported-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>