Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

andi. is microcoded and slow there.
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Up to now "select without attention" was handled the same way as
"select with attention". According to

http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt

select without ATN sends the CDB (Command Descriptor Block) directly,
whereas select with ATN sends one message phase byte
followed by 6, 10, or 12 command phase bytes.

The attached patch implements the behaviour described above.
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
[blauwirbel@gmail.com: cleaned up formatting]
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

they aren't integrated into the build but we can do that incrementally.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

8baf73ad (qdev/isa: convert fdc)
breaks MIPS Malta:

Tried to create isa device isa-fdc with no isa bus present

Fix this by creating an isa bus for piix4.
This change also requires some more qdev related changes
(similar changes were applied to pc.c) and allows
cleaning of piix3/piix4 code.

Thanks to Gerd Hoffmann for his hints.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This suite contains tests to assure that QDict API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qdict
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This file is used by the QDict stress test, it adds 5k nodes
on the dictionary and performs various operations.

My original file had 21k entries and almost 400k of size. After
some discussion with Eduardo Habkost, I decided to reduce the
size.

There are ways to generate this kind of data dynamically, but
it has its problems too.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This suite contains tests to assure that QString API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qstring
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This suite contains tests to assure that QInt API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qint
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Check is a unit testing framework for C.

All the QObjects have unit-tests and more will be written for the
future data types.

More info about check can be found at:

http://check.sourceforge.net/Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The 'i' argument type is for 32-bit only and most handlers
will use an 'int' to store its value.

It's better to fail gracefully when the user enters a value
greater than 32-bit than to get subtle casting bugs.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit drops all the code used to handle the 'args[]' array,
as now we use a dictionary to pass arguments.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's not used anymore, as QDict is now used to handle string
memory allocation/deallocation.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

GET_TLONG() and GET_TPHYSADDR() are not needed anymore, QInt can
handle such conversions.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In order to help the integration with unit-tests and having a better
design, this commit splits monitor_handle_command() into two parts.

The parsing code is moved to a function called monitor_parse_command(),
while allocating memory and calling the handler is still done by
monitor_handle_command().
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive ten arguments to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 79c4f6b0 added handler_8 and
handler_9 handling, but there isn't any command handler with those
number of arguments.

Just drop them.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive seven arguments to
use the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive six arguments to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive five arguments to use
the new monitor's dictionary.

Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive four arguments to use
the new monitor's dictionary.

Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive three arguments to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive two arguments to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive one argument to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive no arguments to use
the new monitor's dictionary.

It might seem no sense to do this, as the handlers have no arguments,
but at the end of this porting work all handlers will have the same
structure.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Command handlers will have to use QDict functions, so export
qdict.h through monitor.h.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

With this commit monitor_handle_command() will be able to setup a
QDict with arguments to command handlers.

However, the current 'args[]' method is still being used, next
changes will port commands to get their arguments from the dictionary.

Two changes are worth noting:

1. The '/' argument type always adds the following standard keys in the
dictionary: 'count', 'format' and 'size'. This way, the argument
name used in the 'args_type' string doesn't matter

2. The optional argument type '?' doesn't need to pass the additional
'has_arg' argument, hanlders can do the same check with qdict_haskey()
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Current handlers argument types, as defined in qemu-monitor.hx file,
are a sequence of chars where each one represents one argument type
of the command handler. The number of chars is also used to know how
many arguments a given handler accepts.

This commit defines a new format, which makes mandatory the use of
a name for each argument.

For example, do_eject() command handler is currently defined as:

{ "eject", "-fB", do_eject, ... }

With the new format it becomes:

{ "eject", "force:-f,filename:B", do_eject, ... }

This way the Monitor will be capable of setting up a dictionary, using
each argument's name as the key and the argument itself as the value.

This commit also adds two new functions: key_get_info() and
next_arg_type(), both are used to parse the new format.

Currently key_get_info() consumes the 'key' part of the new format and
discards it, this way the current parsing code is not affected by this
change.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some functions exported to be used by the Monitor as command
handlers are also called in other places as regular functions.

When those functions got ported to use the Monitor dictionary
to pass argments, the callers will have to setup a dictionary
to be able to call them.

To avoid this problem, this commit add wrappers to those functions,
so that we change the wrapper to accept the dictionary, letting
the current functions as is.

The following wrappers are being added:

- do_help_cmd()
- do_pci_device_hot_remove()
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QDict is a high-level dictionary data type that can be used to store a
collection of QObjects. A unique key is associated with only one
QObject.

The following functions are available:

- qdict_new()    Create a new QDict
- qdict_put()    Add a new 'key:object' pair
- qdict_get()    Get the QObject of a given key
- qdict_del()    Delete a 'key:object' pair
- qdict_size()   Return the size of the dictionary
- qdict_haskey() Check if a given 'key' exists

Some high-level helpers to operate on QStrings and QInts objects
are also provided.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QString is a high-level data type that can be used to represent
C strings.

The following functions are available:

- qstring_from_str() Create a new QString
- qstring_get_str()  Get a pointer to the stored string

Note that qstring_get_str() is too low-level for a data type like
this, but it's interesting for quick read-only accesses.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QInt is a high-level data type that can be used to represent integers,
internally it stores an int64_t value.

The following functions are available:

- qint_from_int() Create a new QInt
- qint_get_int()  Get the stored integer
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit introduces the qobject.h header file, it contains
basic QObject definitions and helper macros.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These variables are per bus, not per drive.  Lets move them and
cleanup things a bit.  And fix the cmd migration bug for real.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>