Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Users complained that it is not obvious what to do when kvm refuses to
build or run due to an unsupported host kernel, so let's improve the
hints.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

When configuring for several targets, some with KVM and some without, CONFIG_KVM was accidentally disabled for some of the targets.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use hxtool to generate the 'command syntax' section of qemu-img's help
message, and the corresponding section of the texinfo documentation.

This has the side-effect of adding 'check' to this list of commands in
the texinfo documentation.
Signed-off-by: NStuart Brady <stuart.brady@gmail.com>

* There are no ISA PCI network adapters.
* MIPS Malta is supported with any PCI network card.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>

Drop them to make qemu build on OpenSolaris.

Cc: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Update the documentation to reflect the introduction of format specific options
with -o. Don't advertise -e or -6 any more, they exist only for compatibility
reasons and can be replaced by the corresponding -o options.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds a small help text to each of the options in the block drivers
which can be displayed by using qemu-img create -f fmt -o ?
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Record device property types, and provide a list of properties at device
registration time.

Add a "device" property type that holds a reference to annother device.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

The ELF loader tracks the range of addresses used by a binary.
However this incorrectly assumes zero is not a valid address.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

The ARMv7-M NVIC device pokes itself into the CPU state.  Now we have a
proper device model we can have the CPU/SoC code do this.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

New configure option for debug builds.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

is redundant with DeviceState->type->name
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When debugging multi-threaded programs, QEMU's gdb stub would report the
correct number of threads (the qfThreadInfo and qsThreadInfo packets).
However, the stub was unable to actually switch between threads (the T
packet), since it would report every thread except the first as being
dead.  Furthermore, the stub relied upon cpu_index as a reliable means
of assigning IDs to the threads.  This was a bad idea; if you have this
sequence of events:

initial thread created
new thread #1
new thread #2
thread #1 exits
new thread #3

thread #3 will have the same cpu_index as thread #1, which would confuse
GDB.  (This problem is partly due to the remote protocol not having a
good way to send thread creation/destruction events.)

We fix this by using the host thread ID for the identifier passed to GDB
when debugging a multi-threaded userspace program.  The thread ID might
wrap, but the same sort of problems with wrapping thread IDs would come
up with debugging programs natively, so this doesn't represent a
problem.
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Provide a petalogix-s3adsp1800.dtb blob.
Correct loading of the petalogix dtb.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NPaul Brook <paul@codesourcery.com>

Look for bios and other support files relative to qemu binary, rather than
a hardcoded prefix.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Add myself as maintainer for the microblaze cpu and boards.
Update list of CRIS machines.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This isn't the most ideal layout, but it makes -L /path/to/git/pc-bios Just
Work which is very convenient.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As Avi correctly noted, last_ram_offset does not mark the last physical
RAM address the guest may see (due to non-continuous memory regions).
Ensure that we catch them all by marking the full possible address range
dirty.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Try to detect the name of the pthread library.
Currently it looks for "-pthread" and "-pthreadGC2".
Signed-off-by: NSebastian Herbszt <herbszt@gmx.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In case you're wondering what connections exactly you have open
or maybe redir'ed in the past, you can't really find out from qemu
right now.

This patch enables you to see all current connections the host
only networking holds open, so you can kill them using the previous
patch.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Using the new host_net_redir command you can easily create redirections
on the fly while your VM is running.

While that's great, it's missing the removal of redirections, in case you
want to have a port closed again at a later point in time.

This patch adds support for removal of redirections.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

All,
     I've recently been playing around with migration via exec.  Unfortunately,
when starting the incoming qemu process with "-incoming exec:cmd", it suffers
the same problem that -incoming tcp used to suffer; namely, that you can't
interact with the monitor until after the migration has happened.  This causes
problems for libvirt usage of -incoming exec, since libvirt expects to be able
to access the monitor ahead of time.  This fairly simple patch allows you to
access the monitor both before and after the migration has completed using exec.

(note: developed/tested with qemu-kvm, but applies perfectly fine to qemu)
Signed-off-by: NChris Lalancette <clalance@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that we have a separate aio pool structure we can remove those
aio pool details from BlockDriver.

Every driver supporting AIO now needs to declare a static AIOPool
with the aiocb size and the cancellation method.  This cleans up the
current code considerably and will make it cleaner and more obvious
to support two different aio implementations behind a single
BlockDriver.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

[this one is required for [PATCH] fully split aio_pool from BlockDriver,
 sorry for not sending it out earlier]

Add a qcow_aio_setup helper to qcow to shared common code between
the aio_readv and aio_writev methods.  Based on the function with
the same name in qcow2.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>