Introduce a new option "adapter_type" when converting to vmdk images.
It can be one of the following: ide (default), buslogic, lsilogic
or legacyESX (according to the vmdk spec from vmware).

In case of a non-ide adapter, heads is set to 255 instead of the 16.
The latter is used for "ide".

Also see LP#545089
Signed-off-by: NOthmar Pasteka <pasteka@kabsi.at>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This test verifies two mirroring issues are fixed with resized images:

 * sync='top' creates an image that is the proper size
 * sync='full' doesn't cause an assertion failure and crash qemu
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

In an image chain, if the base image is smaller than the current
image, we need to make sure to use the current images count of
unallocated blocks once we get to the end of the base image. Without
this change the code will return 0 blocks when it gets to the end
of the base image and mirror_run will fail its assertion.
Signed-off-by: NVishvananda Ishaya <vishvananda@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

It turned out that the change in b7ab0fea was actually a real qcow2
corruption fix. This is a reproducer for the bug.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

# By Andreas Färber
# Via Andreas Färber
* afaerber/qom-cpu:
  linux-user: bsd-user: Don't reset X86CPU twice
  target-i386: Pass X86CPU to cpu_x86_set_a20()
  target-unicore32: Rename CPU subtypes
  target-openrisc: Rename CPU subtypes
  target-openrisc: TYPE_OPENRISC_CPU should be abstract
  target-m68k: Rename CPU subtypes
  target-m68k: Mark as unmigratable
  target-s390x: Mark as unmigratable
  target-sh4: Mark as unmigratable
  target-xtensa: Mark as unmigratable
  target-microblaze: Mark as unmigratable
  target-unicore32: Mark as unmigratable
  ide/mmio: QOM'ify MMIO IDE for R2D

# By Henry Harrington (1) and Stefan Weil (1)
# Via Andreas Färber
* afaerber-or/cocoa-for-upstream:
  cocoa: Replace non-portable asprintf() by g_strdup_printf()
  cocoa: Fix VBE function Set Display Start

virtio,make,pci,e1000,vfio,piix

This includes my timestamp generation cleanup,
Amos's and my work on virtio net commands,
pci,e1000,vfio and piix fixes.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 31 Jan 2013 06:20:27 AM CST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin (6) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  vfio-pci: Enable PCIe extended config space
  PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
  ich9: add support for pci assignment
  virtio-net: rename ctrl rx commands
  virtio-net: introduce a new macaddr control
  virtio-net: remove layout assumptions for ctrl vq
  virtio-net: revert mac on reset
  rules/mak: make clean should blow away timestamp files
  Makefile: clean timestamp generation rule
  rules.mak: cleanup config generation rules
  e1000: document ICS read behaviour

Since commit 65dee380 (target-i386:
move cpu_reset and reset callback to cpu.c) the x86 CPU is reset through
cpu_init() but was still reset immediately after in linux-user and
bsd-user. Clean this up.

Similarly in linux-user/syscall.c it is also reset after cpu_copy().
But that's a bug of its own, fixing which poses a semantic change.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Prepares for cpu_interrupt() changing argument to CPUState.

While touching it, rename to x86_cpu_...() now that it takes an X86CPU.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>

In the initial conversion of CPU models to QOM types, model names were
mapped 1:1 to type names. As a side effect this gained us a type "any",
which is now a device.

To avoid "-device any" silliness and to pave the way for compiling
multiple targets into one executable, adopt a <name>-<arch>-cpu scheme.

No functional changes for -cpu arguments.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Model names were mapped 1:1 to type names. As a side effect this
registered a type "any", which is now a device.

To avoid "-device any" silliness and to pave the way for compiling
multiple targets into one executable, adopt a <name>-<arch>-cpu scheme.

No functional changes for -cpu arguments or -cpu ? output.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

A basic assumption of CPU subtypes is that only specific models get
instantiated. A user is not supposed to instantiate an <arch>-cpu.
Suppress it via abstract = true, which also drops or32-cpu from
-cpu ? output.

Cc: qemu-stable@nongnu.org
Cc: Jia Liu <proljc@gmail.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

In the initial conversion of CPU models to QOM types, model names were
mapped 1:1 to type names. As a side effect this gained us a type "any",
which is now a device.

To avoid "-device any" silliness and to pave the way for compiling
multiple targets into one executable, adopt a <name>-<arch>-cpu scheme.

No functional changes for -cpu arguments or -cpu ? output.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It neither defined CPU_SAVE_VERSION nor implemented cpu_{save,load}().
Mark M68kCPU as unmigratable at device level.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NJuan Quintela <quintela@redhat.com>

CPU_SAVE_VERSION was undefined, so "cpu_common" VMState and
cpu_{save,load}() were not registered. They were no-ops.
Therefore there is no backwards compatibility to keep, so we can mark
S390CPU as unmigratable at device level.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NJuan Quintela <quintela@redhat.com>

It neither defined CPU_SAVE_VERSION nor implemented cpu{save,load}().
Mark it as unmigratable at device level.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NJuan Quintela <quintela@redhat.com>

There was no CPU_SAVE_VERSION defined, so neither "cpu_common" VMState
nor cpu_{save,load}() were registered. Their implementation was no-op.
Therefore there is no backwards compatibility to keep, so mark XtensaCPU
as unmigratable at device level.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NJuan Quintela <quintela@redhat.com>

cpu_{save,load} were no-ops, so de facto it is unmigratable and no
backwards compatibility to keep. Therefore mark the MicroBlazeCPU as
unmigratable at device level the QOM way and suppress "cpu_common"
VMState registration by dropping CPU_SAVE_VERSION.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NJuan Quintela <quintela@redhat.com>

CPU_SAVE_VERSION 2 was bogus as both save and load would just throw a
hw_error(). Therefore we can without problems suppress registration of
"cpu_common" VMState by dropping CPU_SAVE_VERSION define and provide an
unmigratable "cpu" VMStateDescription for UniCore32CPU at device level
instead, where we can attach this the QOM way.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NJuan Quintela <quintela@redhat.com>

It was not qdev'ified before, so turn it into a SysBusDevice.
Keep mmio_ide_init_drives() around to attach the hard drive.
Signed-off-by: NAndreas Färberr <afaerber@suse.de>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The pos field in the DSPControl register is not correctly initialized.
Per documentation, the result of MTHLIP is unpredictable if the value of the
pos field before the execution is greater than 32.
Signed-off-by: NPetar Jovanovic <petarj@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

compute_hflags() will reset DSP h-flags, so MX bit should be initially set
for usermode in cpu_state_reset() if DSP ASE is implemented.
This change will bring back user-mode support for DSP ASE, since one of the
recent changes broke it.
Signed-off-by: NPetar Jovanovic <petarj@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Turn MADD.fmt, MSUB.fmt, NMADD.fmt and NMSUB.fmt from fused to unfused
operations, so that they behave in the same way as a separate multiplication
and addition.  The instructions were only fused in early MIPS IV processors.
Signed-off-by: NRichard Sandiford <rdsandiford@googlemail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Sign-extend the result of LWR, as is already done for LWL.  This is necessary
in the case where LWR loads the full word (i.e. the address is actually
aligned).  In the other cases, it is implementation defined whether the
upper 32 bits of the result are unchanged or a copy of bit 31.  The latter
seems easier to implement.

Previously the code used:

    (oldval & (0xfffffffe << (31 - bitshift))) | (newval >> bitshift)

which zeroed the upper bits of the register, losing any previous sign
extension in the unaligned cases.
Signed-off-by: NRichard Sandiford <rdsandiford@googlemail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Make RESTORE use sign-extending rather than zero-extending loads.
Signed-off-by: NRichard Sandiford <rdsandiford@googlemail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

* 'target-arm.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
  target-arm: Rename CPU types
  target-arm: Fix TCG temp leaks for WI and UNDEF VFP sysreg writes

DSP instruction from the (d)append sub-class can be implemented with
TCG. Use a different function for these instructions are they are quite
different from compare-pick sub-class.

Fix BALIGN instruction for negative value, where the value should be
zero-extended before being shift to the right.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This allow to reduce the number of macros.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This allow to reduce the number of macros.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Instead of playing with bit shifting, add two unions (one for 32-bit
values, one for 64-bit ones) to access all the DSP elements with the
correct type.

This make the code easier to read and less error prone, and allow GCC
to vectorize the code in some cases.
Reviewed-by: NEric Johnson <ericj@mips.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

On CPU without DSP ASE support, a reserved instruction exception (instead of
a DSP ASE sate disabled) should be generated.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Copy insn_flags in DisasContext to avoid passing a CPUMIPSState pointer
to subroutines, as suggested by Richard Henderson. Change subroutines to
use this new field and remove the first argument.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When rd is 0, which still need to do the actually load to possibly
generate a TLB exception.
Reviewed-by: NEric Johnson <ericj@mips.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

Register a dpy_gfx_setdata callback so that the Cocoa code
is notified whenever the screen start address changes.

Commit 1d3323de has a similar fix for the VNC UI.
Signed-off-by: NHenry Harrington <henry.harrington@gmail.com>
Cc: qemu-stable@nongnu.org (1.3.x)
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

# By Christoffer Dall (1) and Peter Maydell (1)
# Via Peter Maydell
* pmaydell/arm-devs.next:
  hw/vexpress: Use correct HBI (board model number) for vexpress-a15
  hw/arm_sysctl: Clear sysctl cfgctrl start bit

# By Markus Armbruster (12) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
  qmp-commands.hx: s/tray-open/tray_open/ to match qapi schema
  tests: Fix {rtc, m48t59}-test build on illumos
  qemu-pixman.h: Avoid mutual inclusion loop with console.h
  qemu-ga: Fix unchecked strdup() by converting to g_strdup()
  qapi: Fix unchecked strdup() by converting to g_strdup()
  libcacard: Fix unchecked strdup() by converting to g_strdup()
  qemu-log: Plug trivial memory leak in cpu_set_log_filename()
  qemu-log: Fix unchecked strdup() by converting to g_strdup()
  virtfs-proxy-helper: Fix unchecked strdup() by conv. to g_strdup()
  spice: Fix unchecked strdup() by converting to g_strdup()
  readline: Fix unchecked strdup() by converting to g_strdup()
  hw/9pfs: Fix unchecked strdup() by converting to g_strdup()
  g_strdup(NULL) returns NULL; simplify
  g_malloc(0) and g_malloc0(0) return NULL; simplify
  xilinx_axidma: Fix debug mode compile messages
  cadence_gem: Debug mode compile fixes
  cadence_ttc: Debug mode compile fixes
  vnc: Clean up vncws_send_handshake_response()

# By Andreas Färber
# Via Andreas Färber
* afaerber-or/prep-up:
  prep: Move PReP machine to hw/ppc/
  prep_pci: Convert to QOM realizefn
  prep_pci: Create PCIBus and PCIDevice in-place

# By Cornelia Huck (13) and others
# Via Alexander Graf
* agraf/s390-for-upstream:
  s390: Drop set_bit usage in virtio_ccw.
  s390: css error codes.
  s390: Use s390_cpu_physical_memory_map for tpi.
  sclpconsole: Don't instantiate sclpconsole with -nodefaults
  s390: Add s390-ccw-virtio machine.
  s390-virtio: Check for NULL device in reset hypercall
  s390: Move hw files to hw/s390x
  virtio-s390: add a reset function to virtio-s390 devices
  s390: Make typeinfo const
  s390: Add new channel I/O based virtio transport.
  s390-virtio: Factor out some initialization code.
  s390: Wire up channel I/O in kvm.
  s390: Virtual channel subsystem support.
  s390: Add channel I/O instructions.
  s390: I/O interrupt and machine check injection.
  s390: Channel I/O basic definitions.
  s390: Add mapping helper functions.
  s390: Lowcore mapping helper.
  s390: Add default support for SCLP console