- 02 6月, 2015 15 次提交
-
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
The previous commits narrowed use of QError to handle_qmp_command() and its helpers monitor_protocol_emitter(), build_qmp_error_dict(). Narrow it further to just the command handler call: instead of converting Error to QError throughout handle_qmp_command(), convert the QError gotten from the command handler to Error, and switch the helpers from QError to Error. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Move mon->error handling to its caller handle_qmp_command(). Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. pcie_aer_inject_error's implementation is split into the hmp_pcie_aer_inject_error() and pcie_aer_inject_error_print(). The former is a peculiar crossbreed between HMP and QMP handler. On success, it works like a QMP handler: store QDict through ret_data parameter, return 0. Printing the QDict is left to pcie_aer_inject_error_print(). On failure, it works more like an HMP handler: print error to monitor, return negative number. To convert to the traditional interface, turn pcie_aer_inject_error_print() into a command handler wrapping around hmp_pcie_aer_inject_error(). By convention, this command handler should be called hmp_pcie_aer_inject_error(), so rename the existing hmp_pcie_aer_inject_error() to do_pcie_aer_inject_error(). Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. For device_add, that's easy: just wrap the obvious hmp_device_add() around do_device_add(). monitor_user_noop() is now unused, drop it. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. For drive_del, that's easy: hmp_drive_del() sheds its unused last parameter, and its return value, which the caller ignored anyway. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Protocol must be spice, vnc isn't implemented. Fix up documentation. Attempts to use vnc or any other unknown protocol yield the misleading error message "Invalid parameter 'protocol'". Improve it to "Parameter 'protocol' expects spice". Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by. Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Inline qmp_call_cmd() along with its helper handler_audit() into its only caller handle_qmp_command(), and simplify the result. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
The asynchronous monitor command interface goes back to commit 940cc30d (Jan 2010). Added a third case to command execution. The hope back then according to the commit message was that all commands get converted to the asynchronous interface, killing off the other two cases. Didn't happen. The initial asynchronous commands balloon and info balloon were converted back to synchronous long ago (commit 96637bcd and d72f32), with commit messages calling the asynchronous interface "not fully working" and "deprecated". The only other user went away in commit 3b5704b2. New code generally uses synchronous commands and asynchronous events. What exactly is still "not fully working" with asynchronous commands? Well, here's a bug that defeats actual asynchronous use pretty reliably: the reply's ID is wrong (and has always been wrong) unless you use the command synchronously! To reproduce, we need an asynchronous command, so we have to go back before commit 3b5704b2. Run QEMU with spice: $ qemu-system-x86_64 -nodefaults -S -spice port=5900,disable-ticketing -qmp stdio {"QMP": {"version": {"qemu": {"micro": 94, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}} Connect a spice client in another terminal: $ remote-viewer spice://localhost:5900 Set up a migration destination dummy in a third terminal: $ socat TCP-LISTEN:12345 STDIO Now paste the following into the QMP monitor: { "execute": "qmp_capabilities", "id": "i0" } { "execute": "client_migrate_info", "id": "i1", "arguments": { "protocol": "spice", "hostname": "localhost", "port": 12345 } } { "execute": "query-kvm", "id": "i2" } Produces two replies immediately, one to qmp_capabilities, and one to query-kvm: {"return": {}, "id": "i0"} {"return": {"enabled": false, "present": true}, "id": "i2"} Both are correct. Two lines of debug output from libspice-server not shown. Now EOF socat's standard input to make it close the connection. This makes the asynchronous client_migrate_info complete. It replies: {"return": {}} Bug: "id": "i1" is missing. Two lines of debug output from libspice-server not shown. Cherry on top: storage for the missing ID is leaked. Get rid of this stuff before somebody hurts himself with it. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 01 6月, 2015 23 次提交
-
-
由 Peter Maydell 提交于
pc, pci, tpm, virtio, vhost enhancements and fixes A bunch of cleanups and fixes all over the place, enhancements in TPM, virtio and vhost. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon Jun 1 13:19:48 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (60 commits) vhost-user: add multi queue support virtio: make features 64bit wide qdev: add 64bit properties virtio-mmio: ioeventfd support hw/acpi/aml-build: Fix memory leak acpi: add aml_while() term acpi: add aml_increment() term acpi: add aml_shiftright() term acpi: add aml_shiftleft() term acpi: add aml_index() term acpi: add aml_lless() term acpi: add aml_add() term TPM2 ACPI table support tpm: Probe for connected TPM 1.2 or TPM 2 Extend TPM TIS interface to support TPM 2 Add stream ID to MSI write acpi: Simplify printing to dynamic string i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted i386/pc_q35: don't insist on board FDC if there's no default floppy i386/pc: '-drive if=floppy' should imply a board-default FDC ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Ouyang Changchun 提交于
Based on patch by Nikolay Nikolaev: Vhost-user will implement the multi queue support in a similar way to what vhost already has - a separate thread for each queue. To enable the multi queue functionality - a new command line parameter "queues" is introduced for the vhost-user netdev. Signed-off-by: NNikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: NChangchun Ouyang <changchun.ouyang@intel.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Make features 64bit wide everywhere. On migration a full 64bit guest_features field is sent if one of the high bits is set, in addition to the lower 32bit guest_features field which must stay for compatibility reasons. That way we send the lower 32 feature bits twice, but the code is simpler because we don't have to split and compose the 64bit features into two 32bit fields. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Needed for virtio features which go from 32bit to 64bit with virtio 1.0 Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Ying-Shiuan Pan 提交于
set_host_notifier and set_guest_notifiers supported by virtio-mmio now. Most code copied from virtio-pci. This makes it possible to use vhost-net with virtio-mmio, improving performance by about 30%. The kvm-arm does not yet support irqfd, need to fix the hard-coded part after kvm-arm gets irqfd support. Signed-off-by: NYing-Shiuan Pan <yingshiuan.pan@gmail.com> Signed-off-by: NPavel Fedin <p.fedin@samsung.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Shannon Zhao 提交于
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefWhile Opcode. Reviewed-by: NShannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefIncrement Opcode. Reviewed-by: NShannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefShiftRight Opcode. Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefShiftLeft Opcode. Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefIndex Opcode. Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefLLess Opcode. Reviewed-by: NShannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefAdd Opcode. Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
-
由 Stefan Berger 提交于
Add a TPM2 ACPI table if a TPM 2 is used in the backend. Also add an SSDT for the TPM 2. Rename tpm_find() to tpm_get_version() and have this function return the version of the TPM found, TPMVersion_Unspec if no TPM is found. Use the version number to build version specific ACPI tables. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Peter Maydell 提交于
TriCore bugfixes # gpg: Signature made Sat May 30 15:50:49 2015 BST using RSA key ID 6B69CA14 # gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" * remotes/bkoppelmann/tags/pull-tricore-20150530: target-tricore: fix BOL_ST_H_LONGOFF using ld target-tricore: fix msub32_q producing the wrong overflow bit target-tricore: fix OPC2_32_RR_DVINIT_HU having write before use on the result Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Stefan Berger 提交于
In the TPM passthrough backend driver, modify the probing code so that we can check whether a TPM 1.2 or TPM 2 is being used and adapt the behavior of the TPM TIS accordingly. Move the code that tested for a TPM 1.2 into tpm_utils.c and extend it with test for probing for TPM 2. Have the function return the version of TPM found. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Stefan Berger 提交于
Following the recent upgrade to version 1.3, extend the TPM TIS interface with capabilities introduced for support of a TPM 2. TPM TIS for TPM 2 introduced the following extensions beyond the TPM TIS 1.3 (used for TPM 1.2): - A new 32bit interface Id register was introduced. - New flags for the status (STS) register were defined. - New flags for the capability flags were defined. Support the above if a TPM TIS 1.3 for TPM 2 is used with a TPM 2 on the backend side. Support the old TPM TIS 1.3 configuration if a TPM 1.2 is being used. A subsequent patch will then determine which TPM version is being used in the backend. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Pavel Fedin 提交于
GICv3 ITS distinguishes between devices by using hardwired device IDs passed on the bus. This patch implements passing these IDs in qemu. SMMU is also known to use stream IDs, therefore this addition can also be useful for implementing platforms with SMMU. Signed-off-by: NPavel Fedin <p.fedin@samsung.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Changes from v1: - Added bus number to the stream ID - Added stream ID not only to MSI-X, but also to plain MSI. Some common code was made into msi_send_message() function. Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Markus Armbruster 提交于
build_append_namestringv() and aml_string() first calculate the resulting string's length with vsnprintf(NULL, ...), then allocate, then print for real. Simply use g_strdup_vprintf() or g_vasprintf() instead. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
-
由 Laszlo Ersek 提交于
It is Very annoying to carry forward an outdatEd coNtroller with a mOdern Machine type. Hence, let us not instantiate the FDC when all of the following apply: - the machine type is pc-q35-2.4 or later, - "-device isa-fdc" is not passed on the command line (nor in the config file), - no "-drive if=floppy,..." is requested. Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Suggested-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Laszlo Ersek 提交于
The "no_floppy = 1" machine class setting causes "default_floppy" in main() to become zero. Consequently, default_drive() will not call drive_add() and drive_new() for IF_FLOPPY, index=0, meaning that no default floppy drive will be created for the virtual machine. In that case, board code should also not insist on the creation of the board-default FDC. The board-default FDC will still be created if the user requests a floppy drive with "-drive if=floppy". Additionally, separate FDCs can be specified manually with "-device isa-fdc". They allow the -device isa-fdc,driveA=... syntax that is more flexible than the one required by the board-default FDC: -global isa-fdc.driveA=... This patch doesn't change the behavior observably, as all Q35 machine types have "no_floppy = 0". Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Laszlo Ersek 提交于
Even if board code decides not to request the creation of the FDC (keyed off board-level factors, to be determined later), we should create the FDC nevertheless if the user passes '-drive if=floppy' on the command line. Otherwise '-drive if=floppy' would break without explicit '-device isa-fdc' on such boards. Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Laszlo Ersek 提交于
This patch introduces no observable change, but it allows the callers of pc_basic_device_init(), ie. pc_init1() and pc_q35_init(), to request (or not request) the creation of the FDC explicitly. At the moment both callers pass constant create_fdctrl=true (hence no observable change). Assuming a board passes create_fdctrl=false, "floppy" will be NULL on output, and (beyond the FDC not being created) that NULL will be passed on to pc_cmos_init(). Luckily, pc_cmos_init() already handles that case. Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
-
- 31 5月, 2015 2 次提交
-
-
由 Jason Wang 提交于
Increase the queue limit to 1024. But virtio-ccw and s390-virtio won't support this, this is done through failing device_plugged() for those two transports if the number of virtqueues is greater than 64. Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Wang 提交于
VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic. Cc: Amit Shah <amit.shah@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-