- 05 2月, 2016 1 次提交
-
-
由 Peter Maydell 提交于
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-10-git-send-email-peter.maydell@linaro.org
-
- 04 2月, 2016 6 次提交
-
-
由 Guillaume Subiron 提交于
A unsigned short is now passed in argument to udp_attach instead of using a hardcoded "AF_INET" to call qemu_socket(). This prepares for IPv6 support. Signed-off-by: NGuillaume Subiron <maethor@subiron.org> Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Guillaume Subiron 提交于
This patch makes solookup() compatible with varying address families, by using a new sockaddr_equal() function that compares two sockaddr_storage. This prepares for IPv6 support. Signed-off-by: NGuillaume Subiron <maethor@subiron.org> Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Guillaume Subiron 提交于
solookup() was only compatible with TCP. Having the socket list in argument, it is now compatible with UDP too. Some optimization code is factorized inside the function (the function look at the last returned result before browsing the complete socket list). This prepares for IPv6 support. Signed-off-by: NGuillaume Subiron <maethor@subiron.org> Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Guillaume Subiron 提交于
This patch factorizes some duplicate code into a new function, sotranslate_out(). This function perform the address translation when a packet is transmitted to the host network. If the packet is destinated to the host, the loopback address is used, and if the packet is destinated to the virtual DNS, the real DNS address is used. This code is just a copy of the existent, but factorized and ready to manage the IPv6 case. On the same model, the major part of udp_output() code is moved into a new sotranslate_in(). This function is directly used in sorecvfrom(), like sotranslate_out() in sosendto(). udp_output() becoming useless, it is removed and udp_output2() is renamed into udp_output(). This adds consistency with the udp6_output() function introduced by further patches. Lastly, this factorizes some duplicate code into sotranslate_accept(), which performs the address translation when a connection is established on the host for port forwarding: if it comes from localhost, the host virtual address is used instead. This prepares for IPv6 support. Signed-off-by: NGuillaume Subiron <maethor@subiron.org> Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Guillaume Subiron 提交于
This patch replaces foreign and local address/port couples in Socket structure by 2 sockaddr_storage which can be casted in sockaddr_in. Direct access to address and port is still possible thanks to some \#define, so retrocompatibility of the existing code is assured. The ss_family field of sockaddr_storage is declared after each socket creation. The whole structure is also saved/restored when a Qemu session is saved/restored. This prepares for IPv6 support. Signed-off-by: NGuillaume Subiron <maethor@subiron.org> Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Guillaume Subiron 提交于
Before this patch, if sosendto fails, udp_input is executed as if the packet was sent, recording the packet for icmp errors, which does not makes sense since the packet was not actually sent, errors would be related to a previous packet. This patch adds a goto bad to cut the execution of this function. Signed-off-by: NGuillaume Subiron <maethor@subiron.org> Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 12 11月, 2015 1 次提交
-
-
由 Stefan Weil 提交于
Casting pointers to long won't work on 64 bit Windows. It is not needed with the right format strings. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 24 9月, 2014 1 次提交
-
-
由 Petr Matousek 提交于
When guest sends udp packet with source port and source addr 0, uninitialized socket is picked up when looking for matching and already created udp sockets, and later passed to sosendto() where NULL pointer dereference is hit during so->slirp->vnetwork_mask.s_addr access. Fix this by checking that the socket is not just a socket stub. This is CVE-2014-3640. Signed-off-by: NPetr Matousek <pmatouse@redhat.com> Reported-by: NXavier Mehrenberger <xavier.mehrenberger@airbus.com> Reported-by: NStephane Duverger <stephane.duverger@eads.net> Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NMichael Tokarev <mjt@tls.msk.ru> Message-id: 20140918063537.GX9321@dhcp-25-225.brq.redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 03 10月, 2013 1 次提交
-
-
由 Sebastian Ottlik 提交于
SO_REUSEADDR should be avoided on Windows but is desired on other operating systems. So instead of setting it we call socket_set_fast_reuse that will result in the appropriate behaviour on all operating systems. Signed-off-by: NSebastian Ottlik <ottlik@fzi.de> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Weil <sw@weilnetz.de>
-
- 22 3月, 2013 1 次提交
-
-
由 Stefan Weil 提交于
Instead of adding missing type casts which are needed by MinGW for the 4th argument, the patch uses qemu_setsockopt which was invented for this purpose. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 05 10月, 2012 1 次提交
-
-
由 Amos Kong 提交于
This patch cleans up return sentences in the end of void functions. Reported-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>
-
- 13 3月, 2012 1 次提交
-
-
由 Jan Kiszka 提交于
Close & free sockets when shutting down a slirp instance, also release all buffers. CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
-
- 23 7月, 2011 3 次提交
-
-
由 Jan Kiszka 提交于
Remove this pointless wrapping. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Instead of accepting every DHCP/BOOTP and TFTP packet, only invoke the built-in servers if the target is the virtual host. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
This aligns the code to what the documentation claims: Allow everything but requests that would have to be routed outside of the virtual LAN. So we need to drop the unneeded IP-level filter, allow TFTP requests, and add the missing protocol-level filter to ICMP. CC: Gleb Natapov <gleb@redhat.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 25 7月, 2010 1 次提交
-
-
由 Stefan Weil 提交于
There is no need to have a second set of integral types. Replace them by the standard types from stdint.h. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 04 12月, 2009 1 次提交
-
-
由 Kevin Wolf 提交于
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file descriptors that don't need to be passed to children to stop this misbehaviour. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 7月, 2009 1 次提交
-
-
由 Ed Swierk 提交于
The UDP emulation code for talk has been commented out since the beginning of time, and unless someone who runs CU-SeeMe on qemu with user-mode networking can vouch that the special magic (a) is necessary and (b) works, let's get rid of the code. Signed-off-by: NEd Swierk <eswierk@aristanetworks.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 29 6月, 2009 8 次提交
-
-
由 Jan Kiszka 提交于
The essence of this patch is to stuff (almost) all global variables of the slirp stack into the structure Slirp. In this step, we still keep the structure as global variable, directly accessible by the whole stack. Changes to the external interface of slirp will be applied in the following patches. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
As agreed on the mailing list, there is no interest in keeping the usually disabled slirp statistics in the tree. So this patch removes them. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
After all its years inside the qemu tree, there is no point in keeping the dead code paths of slirp. This patch is a first round of removing usually commented out code parts. More cleanups need to follow (and maybe finally a proper reindention). Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Mark sockets that describe host forwardings. This is required for their (and only their) proper deletion and for pretty-printing. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
This prepares for adding flags to socket.so_state that must not be removed during the lifetime of a socket. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Extend the hostfwd rule format so that the user can specify on which host interface qemu should listen for incoming connections. If omitted, binding will takes place against all interfaces. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
The user mode IP stack is currently only minimally configurable /wrt to its virtual IP addresses. This is unfortunate if some guest has a fixed idea of which IP addresses to use. Therefore this patch prepares the stack for fully configurable IP addresses and masks. The user interface and default addresses remain untouched in this step, they will be enhanced in the following patch. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
The socket faddr/fport is already updated a few lines below, so these are completely redundant. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 18 4月, 2009 1 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7176 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 27 1月, 2009 1 次提交
-
-
由 aliguori 提交于
According to the FSF, the 4-clause BSD license, which slirp is covered under, is not compatible with the GPL or LGPL[1]. [1] http://www.fsf.org/licensing/licenses/index_html#GPLIncompatibleLicenses There are three declared copyright holders in slirp that use the 4-clause BSD license, the Regents of UC Berkley, Danny Gasparovski, and Kelly Price. Below are the appropriate permissions to remove the advertise clause from slirp from each party. Special thanks go to Richard Fontana from Red Hat for contacting all of the necessary authors to resolve this issue! Regents of UC Berkley: From ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change July 22, 1999 To All Licensees, Distributors of Any Version of BSD: As you know, certain of the Berkeley Software Distribution ("BSD") source code files require that further distributions of products containing all or portions of the software, acknowledge within their advertising materials that such products contain software developed by UC Berkeley and its contributors. Specifically, the provision reads: " * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors." Effective immediately, licensees and distributors are no longer required to include the acknowledgement within advertising materials. Accordingly, the foregoing paragraph of those BSD Unix files containing it is hereby deleted in its entirety. William Hoskins Director, Office of Technology Licensing University of California, Berkeley Danny Gasparovski: Subject: RE: Slirp license Date: Thu, 8 Jan 2009 10:51:00 +1100 From: "Gasparovski, Daniel" <Daniel.Gasparovski@ato.gov.au> To: "Richard Fontana" <rfontana@redhat.com> Hi Richard, I have no objection to having Slirp code in QEMU be licensed under the 3-clause BSD license. Thanks for taking the effort to consult me about this. Dan ... Kelly Price: Date: Thu, 8 Jan 2009 19:38:56 -0500 From: "Kelly Price" <strredwolf@gmail.com> To: "Richard Fontana" <rfontana@redhat.com> Subject: Re: Slirp license Thanks for contacting me, Richard. I'm glad you were able to find Dan, as I've been "keeping the light on" for Slirp. I have no use for it now, and I have little time for it (now holding onto Keenspot's Comic Genesis and having a regular US state government position). If Dan would like to return to the project, I'd love to give it back to him. As for copyright, I don't own all of it. Dan does, so I will defer to him. Any of my patches I will gladly license to the 3-part BSD license. My interest in re-licensing was because we didn't have ready info to contact Dan. If Dan would like to port Slirp back out of QEMU, a lot of us 64-bit users would be grateful. Feel free to share this email address with Dan. I will be glad to effect a transfer of the project to him and Mr. Bellard of the QEMU project. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6451 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 14 1月, 2009 1 次提交
-
-
由 blueswir1 提交于
Signed-off-by: NGleb Natapov <gleb@redhat.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6288 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 09 1月, 2009 1 次提交
-
-
由 aliguori 提交于
Add "slirp firewall" to permit connection only to vmchannel addresses. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6241 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 25 10月, 2008 1 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5531 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 10 5月, 2008 1 次提交
-
-
由 balrog 提交于
At the same time remove a bogus test (tested by Jason Wessel). Quiet some gcc4 warnings from slirp compilation. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4402 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 28 4月, 2008 1 次提交
-
-
由 balrog 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4267 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 26 4月, 2008 1 次提交
-
-
由 balrog 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4259 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 27 10月, 2007 2 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3452 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 blueswir1 提交于
Add 'info slirp' command to monitor to display statistics Disable Slirp debugging code by default git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3451 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 17 9月, 2007 2 次提交
-
-
由 ths 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 ths 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 18 1月, 2007 1 次提交
-
-
由 ths 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2327 c046a42c-6fe2-441c-8c8c-71466251a162
-