Add a documentation comment describing the functions for
converting between the cpu and little or bigendian formats.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1467908460-27048-6-git-send-email-peter.maydell@linaro.org

Fix a typo in a comment.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Message-id: 1467908460-27048-5-git-send-email-peter.maydell@linaro.org

Now that all uses of cpu_to_*w() and *_to_cpup() have been replaced
with either ld*_p()/st*_p() or by doing direct dereferences and
using the cpu_to_*()/*_to_cpu() byteswap functions, we can remove
the unused implementations.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1467908460-27048-4-git-send-email-peter.maydell@linaro.org

Don't use cpu_to_*w() and *_to_cpup() to do byte-swapped loads
and stores; instead use ld*_p() and st*_p() which correctly handle
misaligned accesses.

Bring the HNDL() macro into line with how we deal with
PARAMHANDLE(), by using cpu_to_le16() rather than an ifdef
HOST_WORDS_BIGENDIAN.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1467908460-27048-3-git-send-email-peter.maydell@linaro.org

Don't use the cpu_to_*w() functions, which we are trying to deprecate.
Instead just use cpu_to_*() to do the byteswap, which brings the
code in the marshal function in line with that in the unmarshal.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1467908460-27048-2-git-send-email-peter.maydell@linaro.org

There are functions tlb_fill(), cpu_unaligned_access() and
do_unaligned_access() that are called with access type and mmu index
arguments. But these arguments are named 'is_write' and 'is_user' in their
declarations. The patches fix the arguments to avoid a confusion.
Signed-off-by: NSergey Sorokin <afarallax@yandex.ru>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Message-id: 1465907177-1399402-1-git-send-email-afarallax@yandex.ru
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

MIPS patches 2016-07-12

Changes:
* support 10-bit ASIDs
* MIPS64R6-generic renamed to I6400
* initial GIC support
* implement RESET_BASE register in CM GCR

# gpg: Signature made Tue 12 Jul 2016 11:49:50 BST
# gpg:                using RSA key 0x52118E3C0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4  4FC0 5211 8E3C 0B29 DA6B

* remotes/lalrae/tags/mips-20160712:
  target-mips: enable 10-bit ASIDs in I6400 CPU
  target-mips: support CP0.Config4.AE bit
  target-mips: change ASID type to hold more than 8 bits
  target-mips: add ASID mask field and replace magic values
  target-mips: replace MIPS64R6-generic with the real I6400 CPU model
  hw/mips_cmgcr: implement RESET_BASE register in CM GCR
  hw/mips_cpc: make VP correctly start from the reset vector
  target-mips: add exception base to MIPS CPU
  hw/mips/cps: create GIC block inside CPS
  hw/mips: implement Global Interrupt Controller
  hw/mips: implement GIC Interval Timer
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb: misc fixes.

# gpg: Signature made Tue 12 Jul 2016 09:47:21 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-usb-20160712-1:
  xen-usb: Fix 32bit build
  usb: add storage hotplug documentation
  nec-usb-xhci: set the device state to USB_STATE_DEFAULT
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

msmouse: fix misc issues, switch to new input interface.
input: add trace events for full queues.
input-linux: better capability checks and event handling.

# gpg: Signature made Tue 12 Jul 2016 09:20:36 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-input-20160712-1:
  input-linux: better capability checks, merge input_linux_event_{mouse, keyboard}
  input-linux: factor out input_linux_handle_keyboard
  input-linux: factor out input_linux_handle_mouse
  input: add trace events for full queues
  msmouse: send short messages if possible.
  msmouse: switch to new input interface
  msmouse: fix buffer handling
  msmouse: add MouseState, unregister handler on close
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vnc: misc bugfixes.

# gpg: Signature made Tue 12 Jul 2016 08:22:40 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-vnc-20160712-1:
  ui: avoid crash if vnc client disconnects with writes pending
  vnc-enc-tight: use thread local storage for palette
  vnc: fix incorrect checking condition when updating client
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Message-id: 20160623110829.22671-1-anthony.perard@citrix.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1466667901-1341-1-git-send-email-kraxel@redhat.com

This patch is a rough fix to "hw/usb/core.c:401: usb_handle_packet:
 Assertion `dev->state == 3' failed.". Qemu will crash when a usb3
device redirect to Windows7 VM via nec-usb-xhci.

In extensible-host-controler-interface-usb-xhci.pdf P94(4.6.5
Address Device):
    • If the Block Set Address Request (BSR) flag = ‘1’
        • If the slot is in the Enabled state:
            ...
            • Set the Slot State in the Output Slot Context to Default.

BSR = ‘1’: Enabled state to Default state; BSR = ‘0’: Default state
to Addressed state. Try to call usb_device_reset to set device state
to USB_STATE_DEFAULT in xhci_address_slot wether bsr is zero.
Signed-off-by: NZhang Shuaiyi <zhang_syi@massclouds.com>
Message-id: 1467258640-11921-1-git-send-email-zhang_syi@massclouds.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

The read-only Config4.AE bit set denotes extended 10 bits ASID.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

ASID currently has uint8_t type which is too small since some processors
support more than 8 bits ASID. Therefore change its type to uint16_t.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

MIPS64R6-generic gradually gets closer to I6400 CPU, feature-wise. Rename
it to make it clear which MIPS processor it is supposed to emulate.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Implement RESET_BASE register which is local to each VP and a write to
it changes VP's reset exception base. Also, add OTHER register to
allow a software running on one VP to access other VP's local registers.

Guest can use this mechanism to specify custom address from which a VP
will start execution.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

When VP enters the Run state it starts execution from the reset vector.
Currently used CPU_INTERRUPT_WAKE does not do that if reset exception
base has been modified. Therefore fix that by simply resetting given VP.

Drop the usage of CPU_INTERRUPT_WAKE also in VP_STOP and instead raise
the CPU_INTERRUPT_HALT to halt a VP.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Replace hardcoded 0xbfc00000 with exception_base which is initialized with
this default address so there is no functional change here.
However, it is now exposed and consequently it will be possible to modify
it from outside of the CPU.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Add GIC to CPS and expose its interrupt pins instead of CPU's.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

The Global Interrupt Controller (GIC) is responsible for mapping each
internal and external interrupt to the correct location for servicing.

The internal representation of registers is different from the specification
in order to consolidate information for each GIC Interrupt Sources and Virtual
Processors with same functionalities. For example SH_MAP00_VP00 registers are
defined like each bit represents a VP but in this implementation the equivalent
map_vp contains VP number in integer form for ease accesses. When it is being
accessed via read write functions an internal data is converted back into the
original format as the specification.

Limitations:
Level triggering only
GIC CounterHi not implemented (Countbits = 32bits)
DINT not implemented
Local WatchDog, Fast Debug Channel, Perf Counter not implemented
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

The interval timer is similar to the CP0 Count/Compare timer within
each processor. The difference is the GIC_SH_COUNTER register is global
to the system so that all processors have the same time reference.

To ease implementation, all VPs are having its own QEMU timer but sharing
global settings and registers such as GIC_SH_CONFIG.COUTNSTOP and
GIC_SH_COUNTER.

MIPS GIC Interval Timer does support upto 64 bits of Count register but
in this implementation it is limited to 32 bits only.
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Improve capability checks (count keys and buttons), store results.

Merge the input_linux_event_mouse and input_linux_event_keyboard
functions into one, dispatch into input_linux_handle_mouse and
input_linux_handle_keyboard depending on device capabilities.

Allow calling both handle functions, so we can handle mice which
also send key events, by routing those key events to the keyboard.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1466067800-25434-4-git-send-email-kraxel@redhat.com

No functional change.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1466067800-25434-3-git-send-email-kraxel@redhat.com

No functional change.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1466067800-25434-2-git-send-email-kraxel@redhat.com

It isn't unusual to happen, for example during reboot when the guest
doesn't reveice events for a while.  So better don't flood stderr
with alarming messages.  Turn them into tracepoints instead so they
can be enabled in case they are needed for trouble-shooting.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1466675495-28797-1-git-send-email-kraxel@redhat.com

Keep track of button changes.  Send the extended 4-byte messages for
three button mice only in case we have something to report for the
middle button.  Use the short 3-byte messages (original protocol for
two-button microsoft mouse) otherwise.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1467625375-31774-5-git-send-email-kraxel@redhat.com

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1467625375-31774-4-git-send-email-kraxel@redhat.com

The msmouse chardev backend writes data without checking whenever there
is enough space.

That happens to work with linux guests, probably by pure luck because
the linux driver enables the fifo and the serial port emulation accepts
more data than announced via qemu_chr_be_can_write() in that case.

Handle this properly by adding a buffer to MouseState.  Hook up a
CharDriverState->accept_input() handler which feeds the buffer to the
serial port.  msmouse_event() only fills the buffer now, and calls the
accept_input handler too to kick off the transmission.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1467625375-31774-3-git-send-email-kraxel@redhat.com

Add struct to track serial mouse state.  Store mouse event handler
there.  Unregister properly on chardev close.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1467625375-31774-2-git-send-email-kraxel@redhat.com

The vnc_client_read() function is called from the vnc_client_io()
event handler callback when there is incoming data to process.
If it detects that the client has disconnected, then it will
trigger cleanup and free'ing of the VncState client struct at
a safe time.

Unfortunately, the vnc_client_io() event handler will also call
vnc_client_write() to handle any outgoing data writes. So if
vnc_client_io() was invoked with both G_IO_IN and G_IO_OUT
events set, and the client disconnects, we may try to write to
a client which has just been freed.

https://bugs.launchpad.net/qemu/+bug/1594861Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1467042529-3372-1-git-send-email-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

currently the color counting palette is allocated from heap, used and destroyed
for each single subrect. Use a static palette per thread for this purpose and
avoid the malloc and free for each update.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1467280846-9674-1-git-send-email-pl@kamp.de
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

vs->disconnecting is set to TRUE and vs->ioc is closed, but
vs->ioc isn't set to NULL, so that the vnc_disconnect_finish()
isn't invoked when you update client in vnc_update_client()
after vnc_disconnect_start invoked. Let's using change the checking
condition to avoid resource leak.
Signed-off-by: NHaibin Wang <wanghaibin.wang@huawei.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1467949056-81208-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Last round of s390x patches for 2.7:
- A large update of the s390x PCI code, bringing it in line with
  the architecture
- Fixes and improvements in the ipl (boot) code
- Refactoring in the css code

# gpg: Signature made Mon 11 Jul 2016 09:04:51 BST
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20160711: (25 commits)
  s390x/pci: make hot-unplug handler smoother
  s390x/pci: replace fid with idx in msg data of msix
  s390x/pci: fix stpcifc_service_call
  s390x/pci: refactor list_pci
  s390x/pci: refactor s390_pci_find_dev_by_idx
  s390x/pci: add checkings in CLP_SET_PCI_FN
  s390x/pci: enable zpci hot-plug/hot-unplug
  s390x/pci: enable uid-checking
  s390x/pci: introduce S390PCIBusDevice qdev
  s390x/pci: introduce S390PCIIOMMU
  s390x/pci: introduce S390PCIBus
  s390x/pci: enforce zPCI state checking
  s390x/pci: refactor s390_pci_find_dev_by_fh
  s390x/pci: unify FH_ macros
  s390x/pci: write fid in CLP_QUERY_PCI_FN
  s390x/pci: acceleration for getting S390pciState
  s390x/pci: fix failures of dma map/unmap
  s390x/css: Unplug handler of virtual css bridge
  s390x/css: Factor out virtual css bridge and bus
  s390x/css: use define for "virtual-css-bridge" literal
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

two self-modifying code fixes

# gpg: Signature made Fri 08 Jul 2016 21:28:50 BST
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-tcg-20160708:
  translate-all: Fix user-mode self-modifying code in 2 page long TB
  cputlb: Fix for self-modifying writes across page boundaries
  cputlb: Add address parameter to VICTIM_TLB_HIT
  cputlb: Move VICTIM_TLB_HIT out of line
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

x86 and machine queue, 2016-07-07

Highlights:
* Improvements on global property error handling
* Translate -cpu options to global properties
* LMCE support

# gpg: Signature made Thu 07 Jul 2016 20:59:01 BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  target-i386: Enable LMCE for '-cpu host' if supported by host
  target-i386: Publish advised value of MSR_IA32_FEATURE_CONTROL via fw_cfg
  target-i386: kvm: Add basic Intel LMCE support
  target-i386: Report hyperv feature words through qom
  target-i386: Show host and VM TSC frequencies on mismatch
  pc: Parse CPU features only once
  arm: virt: Parse cpu_model only once
  cpu: Use CPUClass->parse_features() as convertor to global properties
  target-i386: Avoid using locals outside their scope
  target-i386: TCG can support CPUID.07H:EBX.erms
  target-sparc: Use sparc_cpu_parse_features() directly
  vl: Set errp to &error_abort on machine compat_props
  machine: Add machine_register_compat_props() function
  qdev: GlobalProperty.errp field
  qdev: Eliminate qemu_add_globals() function
  qdev: Don't stop applying globals on first error
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

build fix for travis

# gpg: Signature made Sun 10 Jul 2016 18:07:02 BST
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-rth-20160710:
  build: Use $(AS) for optionrom explicitly
  linux-user: Fix i386 safe-syscall.S
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit "9d8256eb virgl: pass whole GL scanout dimensions" missed the
opengl code path for gtk versions >= 3.16.  Update that one too and
fix the build with recent gtk versions.
Reported-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1467876563-1351-1-git-send-email-kraxel@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>