For Neon "one register and a modified immediate value" forms, the
combination op=1 cmode=1111 is unallocated and should UNDEF.
All instructions of this form also UNDEF if Q == 1 and Vd<0> == 1.
We also add a comment on the only UNPREDICTABLE in this space.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Collapse some switch cases for VSRI into those for VSHL, VSLI,
since the bodies are the same. (This is not completely obvious
for the size < 3 case, but since for VSRI we know U=1 the
GEN_NEON_INTEGER_OP() expansion is equivalent to the open-coded
VSHL/VSLI case.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Correctly handle all the UNDEF cases for Neon instructions of the
"2 registers and shift" form, and make sure that we check for these
cases early enough not to leak TCG temporaries.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Since we know that the case of (pairwise && q) has been caught
earlier, we can simplify the register setup code for each pass
in the three-register-same-size Neon loop.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Correct the handling of UNDEF cases for the NEON "3 registers same
size" forms, by adding missing checks and rationalising some others
so they are done early enough to avoid leaking TCG temporaries.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Simplify the checks for invalid size values for the Neon "three registers
of the same size" instruction forms (and add them where they were missing)
by using a lookup table.

This includes adding symbolic constants for the op values in this space,
since we now use them in multiple places.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This bug is introduced by commit 23910d3f.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys
improves readability and allows removing some type casts.

lduw_phys and ldl_phys were not used because both require aligned
addresses. Therefore it is not possible to simply replace existing
calls by one of these functions.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

All other type casts in calls of cpu_physical_memory_read are
used by hardware emulations and will be fixed by separate patches.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

All other type casts in calls of cpu_physical_memory_write are
used by hardware emulations and will be fixed by separate patches.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

A lot of calls don't operate on bytes but on words or on structured data.
So instead of a pointer to uint8_t, a void pointer is the better choice.

This allows removing many type casts.

(Some very early implementations of memcpy used char pointers
which were replaced by void pointers for the same reason).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

There is a bug in nvidia's binary GPU driver, which causes a segmentation
fault if linked to libGL.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Now that PPC defaults to softfloat which always provides float128
support, there is no need to keep two version of the code, depending if
float128 support is available or not. Suggested by Peter Maydell.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

SH4 is always using softfloat, so it's possible to have helpers directly
taking float32 or float64 value. This allow to get rid of conversions
through CPU_{Float,Double}U.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Based on a patch from: Alejandro Cabrera <aldaya@gmail.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Based on a patch from: Alejandro Cabrera <aldaya@gmail.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NAlejandro Cabrera <aldaya@gmail.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Remove a write-only variable, spotted by GCC 4.6.0:
/src/qemu/hw/ppc.c: In function 'power7_set_irq':
/src/qemu/hw/ppc.c:255:9: error: variable 'cur_level' set but not used [-Werror=unused-but-set-variable]
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The feature bitmap in the s390 virtio machine is little endian. To
address for that, we need to bswap the values after reading them out.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The alignment for longs on s390x is 8. That's the only place where it differs
from the default alignments found in configure already. The example alignment
program from Laurent printed the following on a real s390x:

  alignof(short) 2
  alignof(int) 4
  alignof(long) 8
  alignof(long long) 8
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The proper way to signal that a sysbus devices need no MMIO region is to
pass -1 to sysbus_create_simple.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

factor out ACPI GPE logic. Later it will be used by ICH9 ACPI.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Currently target-arm/ assumes at least ARMv5 core. Add support for
handling also ARMv4/ARMv4T. This changes the following instructions:

BX(v4T and later)

BKPT, BLX, CDP2, CLZ, LDC2, LDRD, MCRR, MCRR2, MRRC, MCRR, MRC2, MRRC,
MRRC2, PLD QADD, QDADD, QDSUB, QSUB, STRD, SMLAxy, SMLALxy, SMLAWxy,
SMULxy, SMULWxy, STC2 (v5 and later)

All instructions that are "v5TE and later" are also bound to just v5, as
that's how it was before.

This patch doesn _not_ include disabling of cp15 access and base-updated
data abort model (that will be required to emulate chips based on a
ARM7TDMI), because:
* no ARM7TDMI chips are currently emulated (or planned)
* those features aren't strictly necessary for my purposes (SA-1 core
  emulation).

All v5 models are handled as they are v5T. Internally we still have a
check if the model is a v5(T) or v5TE, but as all emulated cores are
v5TE, those two cases are simply aliased (for now).

Patch is heavily based on patch by Filip Navara <filip.navara@gmail.com>
which in turn is based on work by Ulrich Hecht <uli@suse.de> and Vincent
Sanders <vince@kyllikki.org>.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).

These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

fix 2Gb integer overflow in in VNC tight and zlib encodings

As found by Roland Dreier <roland@purestorage.com> (excellent
catch!), when amount of VNC compressed data produced by zlib
and sent to client exceeds 2Gb, integer overflow occurs because
currently, we calculate amount of data produced at each step by
comparing saved total_out with new total_out, and total_out is
something which grows without bounds.  Compare it with previous
avail_out instead of total_out, and leave total_out alone.

The same code is used in vnc-enc-tight.c and vnc-enc-zlib.c,
so fix both cases.

There, there's no actual need to save previous_out value, since
capacity-offset (which is how that value is calculated) stays
the same so it can be recalculated again after call to deflate(),
but whole thing becomes less readable this way.
Reported-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

consolidate smbus initialization for pc_piix, mips_malta and mips_fulong.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

On Mon, 4 Apr 2011 20:15:30 +0200, Aurelien Jarno <aurelien@aurel32.net> wrote:
> Is it really safe ignoring write to this register? If yes, it's probably
> a good idea to explain why in a comment. In any case, if supporting this
> register is easy to do, it would be the best option.

I think it is safe.  Please see an updated comment below.

And though implementing this register might be possible, I suppose it
is not worth to supporting FrameTooLong detection, for now at least.

Thank you for comments.

>8---------------------------------------------------------------------
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Tue, 5 Apr 2011 23:12:07 +0900
Subject: [PATCH] lan9118: Ignore write to MAC_VLAN1 register

Since linux 2.6.38, smsc911x driver writes to VLAN1 registger.
Since this register only affects FrameTooLong detection, ignoring
write to this register should be safe.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

factor out ACPI PM1_CNT logic. This will be used by ich9 acpi.

Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

factor out ACPI PM1a EVT logic.
Later this will be used by ich9 acpi.

Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

factor out PM_TMR logic. Later This will be used by ich9 acpi.
Also fixes the same bug in vt82c686.c that was fixed by the following
commits.

> commit 055479fe
> Author: aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162>
> Date:   Wed Jan 21 16:31:20 2009 +0000
>
>     Always return latest pmsts instead of the old one (Xiantao Zhang)
>
>     It may lead to the issue when booting windows guests with acpi=1
>     if return the old pmsts.
>
>     Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
>     Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When checking pfl->rom_mode for when to lazily reenter ROMD mode,
the value was check was the opposite of what it should have been.
This prevent the part from returning to ROMD mode after a write
was made to the CFI rom region.
Signed-off-by: NJordan Justen <jordan.l.justen@intel.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

basename prints a missing-argument error when sdlconfig is empty
and we're cross-compiling.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NBrad Hards <bradh@frogmouth.net>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Quote filename in error message to spot possible whitespace character in
the filename and make error message more meaningful.
Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>