Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.

Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.

Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.

After this change, tracing can be used also for user code and
simpletrace on Win32.

Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Expaned '-mon' arg to allow a 'pretty=on' flag. This makes the
monitor pretty print its replies to easy human debugging / reading
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

vl.c has a Sun-specific hack to supply a prototype for madvise(),
but the call site has apparently moved to arch_init.c.

Haiku doesn't implement madvise() in favor of posix_madvise().
OpenBSD and Solaris 10 don't implement posix_madvise() but madvise().
MinGW implements neither.

Check for madvise() and posix_madvise() in configure and supply qemu_madvise()
as wrapper. Prefer madvise() over posix_madvise() due to flag availability.
Convert all callers to use qemu_madvise() and QEMU_MADV_*.

Note that on Solaris the warning is fixed by moving the madvise() prototype,
not by qemu_madvise() itself. It helps with porting though, and it simplifies
most call sites.

v7 -> v8:
* Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl.

v6 -> v7:
* Adopt madvise() rather than posix_madvise() semantics for returning errors.
* Use EINVAL in place of ENOTSUP.

v5 -> v6:
* Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID.
  Spotted by Blue Swirl.

v4 -> v5:
* Introduce QEMU_MADV_INVALID, suggested by Alexander Graf.
  Note that this relies on -1 not being a valid advice value.

v3 -> v4:
* Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl.
  This will currently break the check in kvm-all.c by calling madvise() with
  a supported flag, which will not fail. Ideas/patches welcome.

v2 -> v3:
* Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf.
* Add configure check for madvise(), too.
  Add defines to Makefile, not QEMU_CFLAGS.
  Convert all callers, untested. Suggested by Blue Swirl.
* Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf.
* Display configure check results.

v1 -> v2:
* Don't rely on posix_madvise() availability, add qemu_madvise().
  Suggested by Blue Swirl.
Signed-off-by: NAndreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

With that patch applied you'll actually see the guests screen in the
spice client.  This does *not* bring qxl and full spice support though.
This is basically the qxl vga mode made more generic, so it plays
together with any qemu-emulated gfx card.  You can display stdvga or
cirrus via spice client.  You can have both vnc and spice enabled and
clients connected at the same time.

Add -spice command line switch.  Has support setting passwd and port for
now.  With this patch applied the spice client can successfully connect
to qemu.  You can't do anything useful yet though.

This patch drops DT_VNC.  The display types are only used to select
select the local display (i.e. curses, sdl, coca, ...).  Remote
displays (for now only vnc, spice will follow) can be enabled
independently.

This patch adds an optional command line switch '-trace' to specify the
filename to write traces to, when qemu starts.
Eg, If compiled with the 'simple' trace backend,
[temp@system]$ qemu -trace FILENAME IMAGE
Allows the binary traces to be written to FILENAME instead of the option
set at config-time.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This is equivalent to SM_PASSTHROUGH security model.
The only exception is, failure of privilige operation like chown
are ignored. This makes a passthrough like security model usable
for people who runs kvm as non root
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

When making copy of arguments we were doing partial copy
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix a warning from OpenBSD linker:
../libhw32/vl.o(.text+0x5c3c): In function `main':
/src/qemu/vl.c:2335: warning: sprintf() is often misused, please use snprintf()
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Switch tree to lookup-by-name using qemu_find_opts().
Also hook up virtfs options so qemu_find_opts works for them too.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Found with this Coccinelle semantic patch:
@@
expression E;
identifier ptr;
identifier fn ~= "qemu_mallocz*";
@@

-ptr = fn(E);
-if (ptr == NULL) { ... }
-
+ptr = fn(E);
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When a 'cont' is issued on a VM that's just waiting for an incoming
migration, the VM reboots and boots into the guest, possibly corrupting
its storage since it could be shared with another VM running elsewhere.

Ensure that a VM started with '-incoming' is only run when an incoming
migration successfully completes.

A new qerror, QERR_MIGRATION_EXPECTED, is added to signal that 'cont'
failed due to no incoming migration has been attempted yet.
Reported-by: NLaine Stump <laine@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We already set sockets to nonzero in the code above.
So this if statement always evaluates true.  Remove it.
Signed-off-by: NJoel Schopp <jschopp@austin.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

These functions are also used for kvm under !CONFIG_IOTHREAD, having
'tcg' in their name is just misleading.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Synchronize RAM blocks with the target and migrate using name/offset
pairs.  This ensures both source and target have the same view of
RAM and that we get the right bits into the right slot.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When available, we'd like to be able to access the DeviceState
when registering a savevm.  For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds required infrastructure for the new security model.

- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The new option is:

-fsdev fstype,id=myid,path=/share_path/,security_model=[mapped|passthrough]
-virtfs fstype,path=/share_path/,security_model=[mapped|passthrough],mnt_tag=tag

In the case of mapped security model, files are created with QEMU user
credentials and the client-user's credentials are saved in extended attributes.
Whereas in the case of passthrough security model, files on the
filesystem are directly created with client-user's credentials.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Hook up any cleanup work which needs to be done here.  Advantages over
using atexit(3):

  (1) You get passed in a pointer to the notifier.  If you embed that
      into your state struct you can use container_of() to get get your
      state info.
  (2) You can unregister, say when un-plugging a device.

[ v2: move code out of #ifndef _WIN32 ]
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move handling to change process name to POSIX specific files
plus add a better error message to cover the case where the
feature isn't supported.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move line-buffering setup to OS specific files.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move daemonize handling from vl.c to OS specific files. Provide dummy
stubs for Win32.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move chroot handling to OS specific files.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move code to handle runas, ie. change of user id of QEMU process
to OS specific files and provide dummy stub for Win32.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Introduce OS specific cmdline argument handling by calling
os_parse_cmd_args() at the end of switch() statement. Move option
enum to qemu-options.h and have it included from os-posix.c and
os-win32.c in addition to vl.c.

In addition move SMB argument to os-posix.c
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rename qemu-options.h to qemu-options.def as it is not a header file
for general use and this leaves space for a proper qemu-options.h
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This moves the win32 and POSIX versions of find_datadir() to OS
specific files, and removes some #ifdef clutter from vl.c
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move main signal handler setup to os specific files.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rename os_setup_signal_handling() to os_setup_early_signal_handling()
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move win32 early signal handling setup to os_setup_signal_handling()
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Introcuce os-posix.c and move posix specific signal handling
there.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move host_main_loop_wait() to OS specific files. Create
qemu-os-posix.h and provide empty inline for the POSIX case.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This introduces os-win32.c. It is meant to carry win32 specific
functions thata are not relevant for all of QEMU as well as win32
versions of various pieces like signal handling etc.

Move win32 polling handler helper functions from vl.c to os-win32.c
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

vl.c: netinet/in.h is already included once above for the
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NAndreas Faerber <afaerber@opensolaris.org>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

fix memory leak.
there is no need to allocate more than one gui_timer.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>