Make use of the new vector notifier to track changes of the MSI-X
configuration of virtio PCI devices. On enabling events, we establish
the required virtual IRQ to MSI-X message route and link the signaling
eventfd file descriptor to this vIRQ line. That way, vhost-generated
interrupts can be directly delivered to an in-kernel MSI-X consumer like
the x86 APIC.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Analogously to msi_nr_vectors_allocated, add a service for MSI-X. Will
be used by the virtio-pci layer.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Provide a dummy kvm_kernel_irqchip so that kvm_irqchip_in_kernel can be
used by code that is not under CONFIG_KVM protection.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add services to associate an eventfd file descriptor as input with an
IRQ line as output. Such a line can be an input pin of an in-kernel
irqchip or a virtual line returned by kvm_irqchip_add_route.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Automatically commit route changes after kvm_add_routing_entry and
kvm_irqchip_release_virq. There is no performance relevant use case for
which collecting multiple route changes is beneficial. This makes
kvm_irqchip_commit_routes an internal service which assert()s that the
corresponding IOCTL will always succeed.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This allows to drop routes created by kvm_irqchip_add_irq/msi_route
again.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add a service that establishes a static route from a virtual IRQ line to
an MSI message. Will be used for IRQFD and device assignment. As we will
use this service outside of CONFIG_KVM protected code, stub it properly.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We will add kvm_irqchip_add_msi_route, so let's make the difference
clearer.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Vector notifiers shall be triggered by the MSI/MSI-X core whenever a
relevant configuration change is programmed by the guest. In case of
MSI-X, changes are reported when the effective mask (global &&
per-vector) alters its state. On unmask, the current vector
configuration is included in the event report. This allows users - e.g.
virtio-pci layer - to transfer this information to external MSI-X
routing subsystems - like vhost + KVM in-kernel irqchip.

This implementation only provides MSI-X support, but extension to MSI is
feasible and will be provided later on when adding support for KVM PCI
device assignment.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In preparation of firing vector notifiers on mask changes, call
msix_handle_mask_update also from msix_mask_all. So far, this will have
no real effect.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This helper will also be used by the upcoming config notifier.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

As MSI is now fully supported by KVM (/wrt available features in
upstream), we can finally enable the in-kernel irqchip by default.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If the kernel supports KVM_SIGNAL_MSI, we can avoid the route-based
MSI injection mechanism.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Corresponding kvm.git hash: f2569053e0
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Catch writes to the MSI MMIO region in the KVM APIC and forward them to
the kernel. Provide the kernel support GSI routing, this allows to
enable MSI support also for in-kernel irqchip mode.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Push msi_supported enabling to the APIC implementations where we can
encapsulate the decision more cleanly, hiding the details from the
generic code.
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch basically adds kvm_irqchip_send_msi, a service for sending
arbitrary MSI messages to KVM's in-kernel irqchip models.

As the original KVM API requires us to establish a static route from a
pseudo GSI to the target MSI message and inject the MSI via toggling
that virtual IRQ, we need to play some tricks to make this interface
transparent. We create those routes on demand and keep them in a hash
table. Succeeding messages can then search for an existing route in the
table first and reuse it whenever possible. If we should run out of
limited GSIs, we simply flush the table and rebuild it as messages are
sent.

This approach is rather simple and could be optimized further. However,
latest kernels contains a more efficient MSI injection interface that
will obsolete the GSI-based dynamic injection.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Will be used for generating and distributing MSI messages, both in
emulation mode and under KVM.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Instead of the bitmap size, store the maximum of GSIs the kernel
support. Move the GSI limit assertion to the API function
kvm_irqchip_add_route and make it stricter.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If the kernel page size is larger than TARGET_PAGE_SIZE, which
happens for example on ppc64 with kernels compiled for 64K pages,
the dirty tracking doesn't work.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

* kwolf/for-anthony:
  ATA: Allow WIN_SECURITY_FREEZE_LOCK as nop
  rbd: add discard support
  qcow2: fix the return value -ENOENT -> -EEXIST
  qcow2: Don't hold cache references across yield
  qcow2: Remove unused parameter in do_alloc_cluster_offset
  qemu-iotests: Many parallel allocating I/O requests
  docs: fix one issue in qcow2 specs
  block/qcow2: Add missing GCC_FMT_ATTR to function report_unsupported()
  qemu-iotests: ignore fragmentation information for qed

When using Windows 8 with an AHCI disk drive, it issues a blue screen.
The reason is that WIN_SECURITY_FREEZE_LOCK / CFA_WEAR_LEVEL is not
supported by our ATA implementation, but Windows expects it to be there.

Since without security stuff implemented, the lock would be a nop anyway
and CFA_WEAR_LEVEL already is treated as a nop, let's just allow the cmd
for HD drives as well. That way Windows is happy.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Change the write flag to an operation type in RBDAIOCB, and make the
buffer optional since discard doesn't use it.

Discard is first included in librbd 0.1.2 (which is in Ceph 0.46).
If librbd is too old, leave out qemu_rbd_aio_discard entirely,
so the old behavior is preserved.
Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If cache references are held while the coroutine has yielded, the cache
may get used up and abort() when it can't find a free entry.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This test case manages to let qcow2 abort because its cache is used up
and it can't find free cache entries for new requests any more.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We added image fragmentation statistics functions to qemu-img several days
ago, those patches will cause "./check -qed" failed. This patch will ignore
fragmentation statistics information of qed format, and then "./check -qed"
will work.
Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kiszka/queues/slirp:
  Declare state directory in smb.conf
  slirp: don't use "smb ports = 0" option

* stefanha/tracing:
  configure: check for supported Python 2.x versions
  tracetool: avoid pkgutil.iter_modules() Python 2.7 function
  tracetool: avoid str.rpartition() Python 2.5 function
  tracetool: use Python 2.4-compatible __import__() arguments
  tracetool: use Python 2.4-compatible exception handling syntax

* agraf/s390-for-upstream:
  s390: reset avail and used index on reboot
  S390: dont call system_shutdown on disabled wait
  S390: remove default cdrom, sd-card and floppy support
  S390: support reboot for kvm on s390
  S390: reboot: reset device pages on reboot
  S390: fix error handling on kernel and initrd failures
  S390: fix kernel_commandline handling

* stefanha/trivial-patches:
  iohandler: Use bool for boolean struct member and remove holes
  async: Use bool for boolean struct members and remove a hole
  configure: Fix creation of symbolic links for MinGW toolchain

* agraf/ppc-for-upstream:
  linux-user: Fix invalid TARGET_ABI_BITS usage on ppc hosts
  target-ppc: Some support for dumping TLB_EMB TLBs
  ppce500_spin: Replace assert by hw_error (fixes compiler warning)
  pseries: Fix use of global CPU state
  pseries: Use the same interrupt swizzling for host bridges as p2p bridges
  pseries: Implement automatic PAPR VIO address allocation
  PPC: Fix up e500 cache size setting
  booke:Use MMU API for creating initial mapping for secondary cpus