Fix an error in commit afd4a652 which meant that writing a zero
to the RW bits in the PMCR wouldn't actually clear them. (Error
spotted by Andrzej Zaborowski.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

"!X == 2" is always false (spotted by Coverity), so the checks
for whether rndis is in the correct state would never fire.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

'info mtree' accesses invalid memory in two cases, both due to incorrect
(and unsafe) usage of QTAILQ_FOREACH_SAFE().
Reported-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

With -icount, The vm_clock is updated with help from TCG (it counts
instructions at 2^ICOUNT ns/instructions). With KVM, the instruction
count is not available so KVM cannot provide this help.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There are only three counter/timers on the integrator board:
correct the bounds check to avoid an array overrun. (Spotted
by Coverity, see bug 887883).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix a bug in handling the write-one-to-clear bits in the PMCR
which meant that we would always clear the bit even if the
value written was a zero. Spotted by Coverity (see bug 887883).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Remove a pointless comparison of an array to null. (There is
no need to check whether s->out[i] is non-null as qemu_set_irq
will do that for us.) Spotted by Coverity (see bug 887883).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Remove a check for g_malloc failing: this never happens.
Also use g_malloc rather than g_malloc0 as we immediately
memset the entire region and so zero-initialising it is pointless.
Spotted by Coverity (see bug 887883).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If a malloc() in copy_elf_strings() failed we would call memset()
before the "did malloc fail?" check. Fix this by moving to the
glib alloc/free routines for this memory so we can use g_try_malloc0
rather than having a separate memset(). Spotted by Coverity (see
bug 887883).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Avoid a crash due to null pointer dereference if a guest attempts
to access banked registers for a nonexistent bank. Spotted by
Coverity (see bug 887883).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Migration with fd uses s->mon to pass the fd.  But we only assign the
s->mon for !detached migration.  Fix it.  Once there add a comment
indicating that s->mon has two uses.

Bug reported by:  Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
CC:  Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

'sed -i' is not defined in POSIX. It doesn't work on Mac OS X the way
it's used in configure (without suffix argument). This patch implements
Peter Maydell's idea of xattr.h detection.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

machine defaults to find_default_machine(),
then gets overridden via -M and machine_parse().

If no -M is specified and find_default_machine() returns NULL
(when no machine compiled in), exit with an error.

Avoids a segfault when setting machine->max_cpus.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

cache=unsafe completely ignored bdrv_flush, because flushing the host disk
costs a lot of performance. However, this means that qcow2 images (and
potentially any other format) can lose data even after the guest has issued a
flush if the qemu process crashes/is killed. In case of a host crash, data loss
is certainly expected with cache=unsafe, but if just the qemu process dies this
is a bit too unsafe.

Now that we have two separate flush functions, we can choose to flush
everythign to the OS, but don't enforce that it's physically written to the
disk.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qcow2 has a writeback metadata cache, so flushing a qcow2 image actually
consists of writing back that cache to the protocol and only then flushes the
protocol in order to get everything stable on disk.

This introduces a separate bdrv_co_flush_to_os to reflect the split.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There are two different types of flush that you can do: Flushing one level up
to the OS (i.e. writing data to the host page cache) or flushing it all the way
down to the disk. The existing functions flush to the disk, reflect this in the
function name.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Fix a use-while-uninitialized of the fd_type[] array (introduced
in commit 34d4260e, noticed by Coverity). This is more theoretical
than practical, since it's quite hard to get here with floppy==NULL
(the qdev_try_create() of the isa-fdc device has to fail).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The Data Offset field in the Dynamic Disk Header is an 8 byte field.
Although the specification (2006-10-11) gives an example of initializing
only the first 4 bytes, images generated by Microsoft on Windows initialize
all 8 bytes.

Failure to initialize all 8 bytes results in errors from utilities
like Citrix's vhd-util which checks specifically for the proper Data
Offset field initialization.
Signed-off-by: NCharles Arnold <carnold@suse.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This is cleaner, because we do not need to close the block device when
there is an error opening /dev/nbdX.  It was done this way only to
print errors before daemonizing.

At the same time, use atexit to ensure that the block device is closed
whenever we exit.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Now that the client and server are in the same process, there is
no need to race on the creation of the socket.  We can open the
listening socket before starting the client thread.

This avoids that "qemu-nbd -v -c" prints this once before connecting
successfully to the socket:

    connect(unix:/var/lock/qemu-nbd-nbd0): No such file or directory
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In order to get nice error messages, keep the qemu-nbd process running
until before issuing NBD_DO_IT and connected to the daemon with a pipe.
This lets the qemu-nbd process relay error messages from the daemon and
exit with a nonzero status if appropriate.
Suggested-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This avoids that qemu-nbd uses both forking and threads, which do
not behave well together.

qemu-nbd is already Unix only, and there is no qemu_thread_join,
so for now use pthreads.

Since the parent and child no longer have separate file descriptors,
we can open the NBD device before daemonizing, instead of checking
with access(2) and restricting the open to the client only.
Reported-by: NPierre Riteau <pierre.riteau@irisa.fr>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It will be moved to a global variable by the next patch, and it
would conflict with the socket function.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The client process right now uses SIGTERM to interrupt the server side.
This does not affect the exit status of "qemu-nbd -v -c" because the
server is a child process.  This will change when both sides will be
in the same process, and anyway cleaning up things nicely upon SIGTERM
is good practice.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This can be seen with "qemu-nbd -v -c", which returns 1 instead of 0
when you disconnect with "qemu-nbd -d".
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Recent versions of udev always keep the tray locked so that the kernel
can observe "eject request" events (aka tray button presses) even on
discs that aren't mounted.  Add support for these events in the ATAPI
and SCSI cd drive device models.

To let management cope with the behavior of udev, an event should also
be added for "tray opened/closed".  This way, after issuing an "eject"
command, management can poll until the guests actually reacts to the
command.  They can then issue the "change" command after the tray has been
opened, or try with "eject -f" after a (configurable?) timeout.  However,
with this patch and the corresponding support in the device models,
at least it is possible to do a manual two-step eject+change sequence.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

vvfat used to directly call into the qcow2 block driver instead of using the
block.c wrappers. With the coroutine conversion, this stopped working.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a missing 'break' statement to fix a buffer overrun when
executing the EEPROM write-all command. Spotted by Coverity
(see bug 887883).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

To reproduce the leak, put two name options into the same [cpudef]
section of target-x86_64.conf.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Fixes missing error checking.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Fixes protocol_client_auth_sasl_mechname() not to crash when malloc()
fails.  Spotted by Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>