ppc patch queue 2016-10-17

Highlights:
    * Significant rework of how PCI IO windows are placed for the
      pseries machine type
    * A number of extra tests added for ppc
    * Other tests clean up / fixed
    * Some cleanups to the XICS interrupt controller in preparation
      for the 'powernv' machine type

A number of the test changes aren't strictly in ppc related code, but
are included via my tree because they're primarily focused on
improving test coverage for ppc.

# gpg: Signature made Mon 17 Oct 2016 03:42:41 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.8-20161017:
  spapr: Improved placement of PCI host bridges in guest memory map
  spapr_pci: Add a 64-bit MMIO window
  spapr: Adjust placement of PCI host bridge to allow > 1TiB RAM
  spapr_pci: Delegate placement of PCI host bridges to machine type
  libqos: Limit spapr-pci to 32-bit MMIO for now
  libqos: Correct error in PCI hole sizing for spapr
  libqos: Isolate knowledge of spapr memory map to qpci_init_spapr()
  ppc/xics: Split ICS into ics-base and ics class
  ppc/xics: Make the ICSState a list
  spapr: fix inheritance chain for default machine options
  target-ppc: implement vexts[bh]2w and vexts[bhw]2d
  tests/boot-sector: Increase time-out to 90 seconds
  tests/boot-sector: Use mkstemp() to create a unique file name
  tests/boot-sector: Use minimum length for the Forth boot script
  qtest: ask endianness of the target in qtest_init()
  tests: minor cleanups in usb-hcd-uhci-test
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Mon 17 Oct 2016 03:08:28 BST
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/for-upstream:
  tests/docker/Makefile.include: add a generic docker-run target
  tests/docker: make test-mingw honour TARGET_LIST
  tests/docker: test-build script
  tests/docker: add travis dockerfile
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

migration/next for 20161014

# gpg: Signature made Fri 14 Oct 2016 16:24:13 BST
# gpg:                using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/juanquintela/tags/migration/20161014:
  docs/xbzrle: correction
  migrate: move max-bandwidth and downtime-limit to migrate_set_parameter
  migration: Fix seg with missing port
  migration/postcopy: Explicitly disallow huge pages
  RAMBlocks: Store page size
  Postcopy vs xbzrle: Don't send xbzrle pages once in postcopy [for 2.8]
  migrate: Fix bounds check for migration parameters in migration.c
  migrate: Use boxed qapi for migrate-set-parameters
  migrate: Share common MigrationParameters struct
  migrate: Fix cpu-throttle-increment regression in HMP
  migration/rdma: Don't flag an error when we've been told about one
  migration: Make failed migration load set file error
  migration/rdma: Pass qemu_file errors across link
  migration: Report values for comparisons
  migration: report an error giving the failed field
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This re-factors the docker makefile to include a docker-run target which
can be controlled entirely from environment variables specified on the
make command line. This allows us to run against any given docker image
we may have in our repository, for example:

    make docker-run TEST="test-quick" IMAGE="debian:arm64" \
         EXECUTABLE=./aarch64-linux-user/qemu-aarch64

The existing docker-foo@bar targets still work but the inline
verification has been dropped because we already don't hit that due to
other pattern rules in rules.mak.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>

Message-Id: <20161011161625.9070-5-alex.bennee@linaro.org>
Message-Id: <20161011161625.9070-6-alex.bennee@linaro.org>
[Squash in the verification removal patch. - Fam]
Signed-off-by: NFam Zheng <famz@redhat.com>

The other builders honour this variable, so should the mingw build.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Message-Id: <20161011161625.9070-4-alex.bennee@linaro.org>
Signed-off-by: NFam Zheng <famz@redhat.com>

Much like test-quick but only builds. This is useful for some of the
build targets like ThreadSanitizer that don't yet pass "make check".
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>

Message-Id: <20161011161625.9070-3-alex.bennee@linaro.org>
Signed-off-by: NFam Zheng <famz@redhat.com>

This target grabs the latest Travis containers from their repository at
quay.io and then installs QEMU's build dependencies. With this it is
possible to run on broadly the same setup as they have on travis-ci.org.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Message-Id: <20161011161625.9070-2-alex.bennee@linaro.org>
Signed-off-by: NFam Zheng <famz@redhat.com>

Currently, the MMIO space for accessing PCI on pseries guests begins at
1 TiB in guest address space.  Each PCI host bridge (PHB) has a 64 GiB
chunk of address space in which it places its outbound PIO and 32-bit and
64-bit MMIO windows.

This scheme as several problems:
  - It limits guest RAM to 1 TiB (though we have a limited fix for this
    now)
  - It limits the total MMIO window to 64 GiB.  This is not always enough
    for some of the large nVidia GPGPU cards
  - Putting all the windows into a single 64 GiB area means that naturally
    aligning things within there will waste more address space.
In addition there was a miscalculation in some of the defaults, which meant
that the MMIO windows for each PHB actually slightly overran the 64 GiB
region for that PHB.  We got away without nasty consequences because
the overrun fit within an unused area at the beginning of the next PHB's
region, but it's not pretty.

This patch implements a new scheme which addresses those problems, and is
also closer to what bare metal hardware and pHyp guests generally use.

Because some guest versions (including most current distro kernels) can't
access PCI MMIO above 64 TiB, we put all the PCI windows between 32 TiB and
64 TiB.  This is broken into 1 TiB chunks.  The first 1 TiB contains the
PIO (64 kiB) and 32-bit MMIO (2 GiB) windows for all of the PHBs.  Each
subsequent TiB chunk contains a naturally aligned 64-bit MMIO window for
one PHB each.

This reduces the number of allowed PHBs (without full manual configuration
of all the windows) from 256 to 31, but this should still be plenty in
practice.

We also change some of the default window sizes for manually configured
PHBs to saner values.

Finally we adjust some tests and libqos so that it correctly uses the new
default locations.  Ideally it would parse the device tree given to the
guest, but that's a more complex problem for another time.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

On real hardware, and under pHyp, the PCI host bridges on Power machines
typically advertise two outbound MMIO windows from the guest's physical
memory space to PCI memory space:
  - A 32-bit window which maps onto 2GiB..4GiB in the PCI address space
  - A 64-bit window which maps onto a large region somewhere high in PCI
    address space (traditionally this used an identity mapping from guest
    physical address to PCI address, but that's not always the case)

The qemu implementation in spapr-pci-host-bridge, however, only supports a
single outbound MMIO window, however.  At least some Linux versions expect
the two windows however, so we arranged this window to map onto the PCI
memory space from 2 GiB..~64 GiB, then advertised it as two contiguous
windows, the "32-bit" window from 2G..4G and the "64-bit" window from
4G..~64G.

This approach means, however, that the 64G window is not naturally aligned.
In turn this limits the size of the largest BAR we can map (which does have
to be naturally aligned) to roughly half of the total window.  With some
large nVidia GPGPU cards which have huge memory BARs, this is starting to
be a problem.

This patch adds true support for separate 32-bit and 64-bit outbound MMIO
windows to the spapr-pci-host-bridge implementation, each of which can
be independently configured.  The 32-bit window always maps to 2G.. in PCI
space, but the PCI address of the 64-bit window can be configured (it
defaults to the same as the guest physical address).

So as not to break possible existing configurations, as long as a 64-bit
window is not specified, a large single window can be specified.  This
will appear the same way to the guest as the old approach, although it's
now implemented by two contiguous memory regions rather than a single one.

For now, this only adds the possibility of 64-bit windows.  The default
configuration still uses the legacy mode.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

Currently the default PCI host bridge for the 'pseries' machine type is
constructed with its IO windows in the 1TiB..(1TiB + 64GiB) range in
guest memory space.  This means that if > 1TiB of guest RAM is specified,
the RAM will collide with the PCI IO windows, causing serious problems.

Problems won't be obvious until guest RAM goes a bit beyond 1TiB, because
there's a little unused space at the bottom of the area reserved for PCI,
but essentially this means that > 1TiB of RAM has never worked with the
pseries machine type.

This patch fixes this by altering the placement of PHBs on large-RAM VMs.
Instead of always placing the first PHB at 1TiB, it is placed at the next
1 TiB boundary after the maximum RAM address.

Technically, this changes behaviour in a migration-breaking way for
existing machines with > 1TiB maximum memory, but since having > 1 TiB
memory was broken anyway, this seems like a reasonable trade-off.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

The 'spapr-pci-host-bridge' represents the virtual PCI host bridge (PHB)
for a PAPR guest.  Unlike on x86, it's routine on Power (both bare metal
and PAPR guests) to have numerous independent PHBs, each controlling a
separate PCI domain.

There are two ways of configuring the spapr-pci-host-bridge device: first
it can be done fully manually, specifying the locations and sizes of all
the IO windows.  This gives the most control, but is very awkward with 6
mandatory parameters.  Alternatively just an "index" can be specified
which essentially selects from an array of predefined PHB locations.
The PHB at index 0 is automatically created as the default PHB.

The current set of default locations causes some problems for guests with
large RAM (> 1 TiB) or PCI devices with very large BARs (e.g. big nVidia
GPGPU cards via VFIO).  Obviously, for migration we can only change the
locations on a new machine type, however.

This is awkward, because the placement is currently decided within the
spapr-pci-host-bridge code, so it breaks abstraction to look inside the
machine type version.

So, this patch delegates the "default mode" PHB placement from the
spapr-pci-host-bridge device back to the machine type via a public method
in sPAPRMachineClass.  It's still a bit ugly, but it's about the best we
can do.

For now, this just changes where the calculation is done.  It doesn't
change the actual location of the host bridges, or any other behaviour.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

Currently the functions in pci-spapr.c (like pci-pc.c on which it's based)
don't distinguish between 32-bit and 64-bit PCI MMIO.  At the moment, the
qemu side implementation is a bit weird and has a single MMIO window
straddling 32-bit and 64-bit regions, but we're likely to change that in
future.

In any case, pci-pc.c - and therefore the testcases using PCI - only handle
32-bit MMIOs for now.  For spapr despite whatever changes might happen with
the MMIO windows, the 32-bit window is likely to remain at 2..4 GiB in PCI
space.

So, explicitly limit pci-spapr.c to 32-bit MMIOs for now, we can add 64-bit
MMIO support back in when and if we need it.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

In pci-spapr.c (as in pci-pc.c from which it was derived), the
pci_hole_start/pci_hole_size and pci_iohole_start/pci_iohole_size pairs[1]
essentially define the region of PCI (not CPU) addresses in which MMIO
or PIO BARs respectively will be allocated.

The size value is relative to the start value.  But in pci-spapr.c it is
set to the entire size of the window supported by the (emulated) hardware,
but the start values are *not* at the beginning of the emulated windows.

That means if you tried to map enough PCI BARs, we'd messily overrun the
IO windows, instead of failing in iomap as we should.

This patch corrects this by calculating the hole sizes from the location
of the window in PCI space and the hole start.

[1] Those are bad names, but that's a problem for another time.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

The libqos code for accessing PCI on the spapr machine type uses IOBASE()
and MMIOBASE() macros to determine the address in the CPU memory map of
the windows to PCI address space.

This is a detail of the implementation of PCI in the machine type, it's not
specified by the PAPR standard.  Real guests would get the addresses of the
PCI windows from the device tree.

Finding the device tree in libqos would be awkward, but we can at least
localize this knowledge of the implementation to the init function, saving
it in the QPCIBusSPAPR structure for use by the accessors.

That leaves only one place to fix if we alter the location of the PCI
windows, as we're planning to do.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

The existing implementation remains same and ics-base is introduced. The
type name "ics" is retained, and all the related functions renamed as
ics_simple_*

This will allow different implementations for the source controllers
such as the MSI support of PHB3 on Power8 which uses in-memory state
tables for example.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
[ clg: added ICS_BASE_GET_CLASS and related fixes, based on :
       http://patchwork.ozlabs.org/patch/646010/ ]
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Instead of an array of fixed sized blocks, use a list, as we will need
to have sources with variable number of interrupts. SPAPR only uses
a single entry. Native will create more. If performance becomes an
issue we can add some hashed lookup but for now this will do fine.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[ move the initialization of list to xics_common_initfn,
  restore xirr_owner after migration and move restoring to
  icp_post_load]
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[ clg: removed the icp_post_load() changes from nikunj patchset v3:
       http://patchwork.ozlabs.org/patch/646008/ ]
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Rather than machine instances having backward-compatible option
defaults that need to be repeatedly re-enabled for every new machine
type we introduce, we set the defaults appropriate for newer machine
types, then add code to explicitly disable instance options as needed
to maintain compatibility with older machine types.

Currently pseries-2.5 does not inherit from pseries-2.6 in this
fashion, which is okay at the moment since we do not have any
instance compatibility options for pseries-2.6+ currently.

We will make use of this in future patches though, so fix it here.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
[dwg: Extended to make 2.7 inherit from 2.8 as well]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Vector Extend Sign Instructions:

vextsb2w: Vector Extend Sign Byte To Word
vextsh2w: Vector Extend Sign Halfword To Word
vextsb2d: Vector Extend Sign Byte To Doubleword
vextsh2d: Vector Extend Sign Halfword To Doubleword
vextsw2d: Vector Extend Sign Word To Doubleword
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Since the PXE tester runs rather slow on ppc64 with tcg, there
is a chance that we hit the 60 seconds timeout on machines that
have a heavy CPU load. So let's increase the timeout to ease
the situation.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The pxe-test is run for three different targets now (x86_64, i386
and ppc64), and the bios-tables-test is run for two targets (x86_64
and i386). But each of the tests is using an invariant name for the
disk image with the boot sector code - so if the tests are running in
parallel, there is a race condition that they destroy the disk image
of a parallel test program. Let's use mkstemp() to create unique
temporary files here instead - and since mkstemp() is returning an
integer file descriptor instead of a FILE pointer, we also switch
the fwrite() and fclose() to write() and close() instead.
Reported-by: NSascha Silbe <x-qemu@se-silbe.de>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The pxe-test is quite slow on ppc64 with tcg. We can speed it up
a little bit by decreasing the size of the file that has to be
loaded via TFTP.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The target endianness is not deduced anymore from
the architecture name but asked directly to the guest,
using a new qtest command: "endianness". As it can't
change (this is the value of TARGET_WORDS_BIGENDIAN),
we store it to not have to ask every time we want to
know if we have to byte-swap a value.
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
CC: Greg Kurz <groug@kaod.org>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Two minor cleanups:
- exit gracefully in case on unsupported target,
- put machine command line in a constant to avoid
  to duplicate it.
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

1. Default cache size is 64MB.
2. Semantics correction.
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Mark the old commands 'migrate_set_speed' and 'migrate_set_downtime' as
deprecated.
Move max-bandwidth and downtime-limit into migrate-set-parameters for
setting maximum migration speed and expected downtime limit parameters
respectively.
Change downtime units to milliseconds (only for new-command) and set
its upper bound limit to 2000 seconds.
Update the query part in both hmp and qmp qemu control interfaces.
Signed-off-by: NAshijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

The command :
   migrate tcp:localhost:

   currently segs; fix it so it now says:

   error parsing address 'localhost:'

and the same for -incoming.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

At the moment postcopy will fail as soon as qemu tries to register
userfault on the RAMBlock pages that are backed by hugepages.
However, the kernel is going to get userfault support for hugepage
at some point, and we've not got the rest of the QEMU code to support
it yet, so fail neatly with an error like:

Postcopy doesn't support hugetlbfs yet (/objects/mem1)
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Store the page size in each RAMBlock, we need it later.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

xbzrle relies on reading pages that have already been sent
to the destination and then applying the modifications; we can't
do that in postcopy because the destination may well have
modified the page already or the page has been discarded.

I already didn't allow reception of xbzrle pages, but I
forgot to add the test to stop them being sent.

Enabling both xbzrle and postcopy can make some sense;
if you think that your migration might finish if you
have xbzrle, then when it doesn't complete you flick
over to postcopy and stop xbzrle'ing.

This corresponds to RH bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1368422

Symptom is:

Unknown combination of migration flags: 0x60 (postcopy mode)
(either 0x60 or 0x40)
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This patch fixes the out-of-bounds check of migration parameters in
qmp_migrate_set_parameters() for cpu-throttle-initial and
cpu-throttle-increment by adding a return statement for both as they
were broken since their introduction in 2.5 via commit 1626fee3.
Due to the missing return statements, parameters were getting set to
out-of-bounds values despite the error.
Signed-off-by: NAshijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Now that QAPI makes it easy to pass a struct around, we don't
have to declare as many parameters or local variables.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

It is rather verbose, and slightly error-prone, to repeat
the same set of parameters for input (migrate-set-parameters)
as for output (query-migrate-parameters), where the only
difference is whether the members are optional.  We can just
document that the optional members will always be present
on output, and then share a common struct between both
commands.  The next patch can then reduce the amount of
code needed on input.

Also, we made a mistake in qemu 2.7 of returning an empty
string during 'query-migrate-parameters' when there is no
TLS, rather than omitting TLS details entirely.  Technically,
this change risks breaking any 2.7 client that is hard-coded
to expect the parameter's existence; on the other hand, clients
that are portable to 2.6 already must be prepared for those
members to not be present.

And this gets rid of yet one more place where the QMP output
visitor is silently converting a NULL string into "" (which
is a hack I ultimately want to kill off).
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Commit 69ef1f36 accidentally broke migrate_set_parameter's ability
to set the cpu-throttle-increment to anything other than the
default, because it forgot to parse the user's string into an
integer.

CC: qemu-stable@nongnu.org
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

If the other side tells us there's been an error and we fail
the migration, we don't need to signal that failure to the other
side because it already knew.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NMichael R. Hines <michael@hinespot.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

If an error occurs in a section load, set the file error flag
so that the transport can get notified to do a cleanup.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NMichael R. Hines <michael@hinespot.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

If we fail for some reason (e.g. a mismatched RAMBlock)
and it's set the qemu_file error flag, pass that error back to the
peer so it can clean up rather than waiting for some higher level
progress.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NMichael R. Hines <michael@hinespot.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Report the values when a comparison fails; together with
the previous patch that prints the device and field names
this should give a good idea of why loading the migration failed.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

When a field fails to load (typically due to a limit
check, or a call to a get/put) report the device and field
to give an indication of the cause.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

ui: vnc cleanups, input-linux kbd fix.

# gpg: Signature made Thu 13 Oct 2016 09:47:43 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-ui-20161013-1:
  input-linux: initialize key state
  ui: rename vnc_init_state to vnc_start_protocol
  ui: move some initialization out of vnc_init_state
  ui: remove bogus call to reset_keys() in vnc_init_state
  ui: remove bogus call to graphic_hw_update() in vnc_listen_io
  ui: refactor method for setting up VncDisplay auth types
  ui: rename misleading 'VncDisplay' variables
  ui: remove 'ws_tls' field from VncState
  ui: remove 'enabled' and 'ws_enabled' fields from VncState
  ui: remove misleading comment from vnc_init_state
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

That commit mis-used mux char: the frontend are multiplexed, not the
backend. Fix the regression preventing "c-a c" to switch the focus. The
following patches will fix the crash (when leaving or removing frontend)
by tracking frontends with handler tags.

This reverts commit 949055a2.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>