* Handling of multicast list was missing.
* Multicast all was missing.
* Promiscuous mode for multicast frames was wrong.

This patch is a step to synchronize my maintainer version
of eepro100.c (git://repo.or.cz/qemu/ar7.git) with the
version integrated in QEMU.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Handling of transmit commands is rather complex,
so about 80 lines of code were moved from function
action_command to the new function tx_command.

The two new values "tx" and "cb_address" in the
eepro100 status structure made this possible without
passing too many parameters.

In addition, the moved code was cleaned a little bit:
old comments marked with //~ were removed, C++ style
comments were replaced by C style comments, C++ like
variable declarations after code were reordered.

Simplified mode is still broken. Nor did I fix
endianess issues. Both problems will be fixed in
additional patches (which need this one).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Fixes the boot problem introduced by r665 image in
694b9309.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Common:
 * Remove unnecessary 0x prefix
 * Print %y
 * Fix NZVC flag print order to match CPU bit order

Sparc64 specific:
 * Print registers without line wrapping
 * Print %f40-%f63
 * Pretty print CCR flags
 * Print %fsr and %fprs in full precision
 * More consistent formatting
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

This reverts commit 4839abe7.

The commit was badly broken, Gentoo has sdl as the default driver,
consequently 5 gentoo users have hit the breakage and were kind enough
to report, so thank you:

Claes Gyllenswrd
vekin
Chris

But above all thanks to Toralf Foerster who actually provied enough
information to pinpoint the breakage to sdlaudio.

http://bugs.gentoo.org/show_bug.cgi?id=294269

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't clear interrupts on disabling, because
* Sun4M_SystemArchitecture_edited2.pdf doesn't describe
  that masking or un-masking IRQ shall clear pending ones.

* Field tests also show that SPARCstation-20 doesn't
  clear them.

* The patch makes Solaris 2.5.1/2.6 boot ~1500 times
  faster (~20 seconds instead of ~8 hours)
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

According to pages 9-31 - 9-34 of "SuperSPARC & MultiCache Controller
User's Manual":

1. "A lower priority fault may not overwrite the
    MFSR status of a higher priority fault."
2. The MFAR is overwritten according to the policy defined for the MFSR
3. The overwrite bit is asserted if the fault status register (MFSR)
   has been written more than once by faults of the same class
4. SuperSPARC will never place instruction fault addresses in the MFAR.

Implementation of points 1-3 allows booting Solaris 2.6 and 2.5.1.

v2: CODING_STYLE fixes
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The existing P_REXB internal opcode flag unconditionally emits
the REX prefix.  Technically it's not needed if the register in
question is %al, %bl, %cl, %dl.

Eliding the prefix requires splitting the P_REXB flag into two,
in order to indicate whether the byte register in question is
in the REG or the R/M field.  Within TCG, the byte register is
in the REG field only for stores.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Random reading depends on having the last row/page latched and not beeing
clobbered between read and any following random reads.

Also, s->iolen must be updated when loading the io/data register with
randomly accessed flash data.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

When make is called without a valid configuration,
it should tell the user what to do.

Revision 0e8c9214
was a regression which resulted in a message
which was no longer user friendly
(reported by Aurelien Jarno).

This patch restores the old behaviour.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NAndreas Färber <afaerber@opensolaris.org>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Attached is a patch to fix a typo in 'P' packet processing for M68K.

Without this patch, QEMU fails to honor GDB's P packets from GDB
(writing to registers) for the address registers (A0 - A7).

The problem is because of an obvious typo.  Notice that the second
"if" condition is meant to be n < 16 in:

  if (n < 8) {
    :
  } else if (n < 8) {
Signed-off-by: NKazu Hirata <kazu@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This avoids an unnecessary REX.W prefix when dealing with AND
operands that fit into a 32-bit quantity.  The most common change
actually seen is movz[wb]q -> movz[wb]l.

Similarly, avoid REXW in ext{8,16}u_i64 tcg opcodes.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch adds hardware cursor feature to SM501 graphics chip emulation,
to make the graphic console more useful for QEMU SH4 users.
Signed-off-by: NShin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The stat64/fstat64 syscalls are broken for alpha linux-user.

This is because Alpha, even though it is native 64-bits, has a stat64
syscall that is different than regular stat.  This means that the
"TARGET_LONG_BITS==64" check in syscall.c isn't enough.  Below is
a patch that fixes things for me, although it might not be the cleanest
fix.

This issue keeps sixtrack and fma3d spec2k benchmarks from running.
Signed-off-by: NVince Weaver <vince@csl.cornell.edu>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Raise the zone protection fault in ESR for TLB faults caused by
zone protection bits.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The 40x MMU has 15 zones in the ZPR register.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Bailout on 40x TLB entries with endianess swapping only if the entry
is valid.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The ZSEL was incorrectly beeing decoded from TLBHI. Decode it from
TLBLO instead.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

According to RFC 1350 and RFC 2347, TFTP server should answer RRQ by
either OACK or DATA packet. Qemu's internal TFTP server answers RRQ with
additional options by sending both OACK and DATA packet, thus breaking
the "lock-step" feature of the protocol, and also confuses client.

  Proposed solution would be to, in case of OACK packet, wait for ACK
from client and just then start sending data. Attached patch implements
this.
Signed-off-by: NThomas Horsten <thomas@horsten.com>
Signed-off-by: NMilan Plzik <milan.plzik@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Initialize KVM paravirt cpuid leaf and allow user to control guest
visible PV features through -cpu flag.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As pointed out by clang size is only ever written to, but never actually
used.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that we do not have to flush the backing device anymore implementing
the bdrv_aio_flush method for image formats is trivial.

[hch: forward ported to qemu mainline from a product tree]
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The backing device is only modified from bdrv_commit.  So instead of
flushing it every time bdrv_flush is called for the front-end device
only flush it after we're written data to it in bdrv_commit.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer points out a redundant increment.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer points out a redundant assignment.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer points out a redundant assignment.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer points out a redundant assignment.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer points out value assigned to 'len' is not used.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer pointed out the value of 'sockets' is never reused.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
CC: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 3a03bfa5 added a fallback in case the Linux kernel running qemu is older
than the kernel of the build system. Unfortunately, v1 was committed instead of
v2, so the code has a bug that was revealed in the review (checking for the
wrong error code).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This adds a rebase subcommand to qemu-img which allows to change the backing
file of an image.

In default mode, both the current and the new backing file need to exist, and
after the rebase, the COW image is guaranteed to have the same guest visible
content as before. To achieve this, old and new backing file are compared and,
if necessary, data is copied from the old backing file into the COW image.

With -u an unsafe mode is enabled that doesn't require the backing files to
exist. It merely changes the backing file reference in the COW image. This is
useful for renaming or moving the backing file. The user is responsible to make
sure that the new backing file has no changes compared to the old one, or
corruption may occur.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Introduce the functions needed to change the backing file of an image. The
function is implemented for qcow2.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If an image references a backing file that doesn't exist, qemu-img info fails
to open this image. Exactly in this case the info would be valuable, though:
the user might want to find out which file is missing.

This patch introduces a BDRV_O_NO_BACKING flag to ignore the backing file when
opening the image. qemu-img info is the first user and provides info now even
if the backing file is invalid.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move 200 lines out of vl.c already into common code that only needs to
be compiled once.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>