QOM backends can refer to chardevs, but not vice versa.  So
process -chardev and -fsdev options before -object

This fixes the rng-egd backend to virtio-rng.
Reported-by: NAmos Kong <akong@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Most QEMU typedefs are camelcase, starting with one uppercase letter
and containing at least one lowercase letter.  There are a few
all-uppercase types, add the most common too.

This fixes recognition of types in lines such as

    static __attribute__((unused)) inline void tcg_out8(TCGContext *s, uint8_t v)

(Example provided by Peter Maydell).
Reported-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The SDM specifies (June 2014 Vol3 11.11.5):

    On a hardware reset, the P6 and more recent processors clear the
    valid flags in variable-range MTRRs and clear the E flag in the
    IA32_MTRR_DEF_TYPE MSR to disable all MTRRs. All other bits in the
    MTRRs are undefined.

We currently do none of that, so whatever MTRR settings you had prior
to reset is what you have after reset.  Usually this doesn't matter
because KVM often ignores the guest mappings and uses write-back
anyway.  However, if you have an assigned device and an IOMMU that
allows NoSnoop for that device, KVM defers to the guest memory
mappings which are now stale after reset.  The result is that OVMF
rebooting on such a configuration takes a full minute to LZMA
decompress the firmware volume, a process that is nearly instant on
the initial boot.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The MTRR state in KVM currently runs completely independent of the
QEMU state in CPUX86State.mtrr_*.  This means that on migration, the
target loses MTRR state from the source.  Generally that's ok though
because KVM ignores it and maps everything as write-back anyway.  The
exception to this rule is when we have an assigned device and an IOMMU
that doesn't promote NoSnoop transactions from that device to be cache
coherent.  In that case KVM trusts the guest mapping of memory as
configured in the MTRR.

This patch updates kvm_get|put_msrs() so that we retrieve the actual
vCPU MTRR settings and therefore keep CPUX86State synchronized for
migration.  kvm_put_msrs() is also used on vCPU reset and therefore
allows future modificaitons of MTRR state at reset to be realized.

Note that the entries array used by both functions was already
slightly undersized for holding every possible MSR, so this patch
increases it beyond the 28 new entries necessary for MTRR state.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We currently define the number of variable range MTRR registers as 8
in the CPUX86State structure and vmstate, but use MSR_MTRRcap_VCNT
(also 8) to report to guests the number available.  Change this to
use MSR_MTRRcap_VCNT consistently.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit e8f6d00c ("target-i386: raise
page fault for reserved physical address bits") added a check that the
NX bit is not set on PAE PDPEs, but it also added it to rsvd_mask for
the rest of the function. This caused any PDEs or PTEs with NX set to be
erroneously rejected, making PAE guests with NX support unusable.
Signed-off-by: NWilliam Grant <wgrant@ubuntu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This implements an NMI interface POWERPC SPAPR machine.
This enables an "nmi" HMP/QMP command supported on SPAPR.

This calls POWERPC_EXCP_RESET (vector 0x100) in the guest to deliver NMI
to every CPU. The expected result is XMON (in-kernel debugger) invocation.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This implements an NMI interface for s390 and s390-ccw machines.

This removes #ifdef s390 branch in qmp_inject_nmi so new s390's
nmi_monitor_handler() callback is going to be used for NMI.

Since nmi_monitor_handler()-calling code is platform independent,
CPUState::cpu_index is used instead of S390CPU::env.cpu_num.
There should not be any change in behaviour as both @cpu_index and
@cpu_num are global CPU numbers.

Note that s390_cpu_restart() already takes care of the specified cpu,
so we don't need to schedule via async_run_on_cpu().

Since the only error s390_cpu_restart() can return is ENOSYS, convert
it to QERR_UNSUPPORTED.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This converts s390-virtio and s390-ccw-virtio machines to QOM MachineClass.
This brings ability to add interfaces to the machine classes. The first
interface for addition will be NMI.

The patch is mechanical so no change in behavior is expected.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This introduces an NMI (Non Maskable Interrupt) interface with
a single nmi_monitor_handler() method. A machine or a device can
implement it. This searches for an QOM object with this interface
and if it is implemented, calls it. The callback implements an action
required to cause debug crash dump on in-kernel debugger invocation.
The callback returns Error**.

This adds a nmi_monitor_handle() helper which walks through
all objects to find the interface. The interface method is called
for all found instances.

This adds support for it in qmp_inject_nmi(). Since no architecture
supports it at the moment, there is no change in behaviour.

This changes inject-nmi command description for HMP and QMP.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

As already done for kvm_cpu_synchronize_state(), let's trigger
kvm_arch_put_registers() via run_on_cpu() for kvm_cpu_synchronize_post_reset()
and kvm_cpu_synchronize_post_init().

This way, we make sure that the register synchronizing ioctls are
called from the proper vcpu thread; this avoids calls to
synchronize_rcu() in the kernel.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

target-arm:
 * fix preferred return address for A64 BRK insn
 * implement AArch64 single-stepping
 * support loading gzip compressed AArch64 kernels
 * use correct PSCI function IDs in the DT when KVM uses PSCI 0.2
 * minor cleanups

# gpg: Signature made Tue 19 Aug 2014 19:04:09 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140819:
  arm: stellaris: Remove misleading address_space_mem var
  arm: armv7m: Rename address_space_mem -> system_memory
  aarch64: Allow -kernel option to take a gzip-compressed kernel.
  loader: Add load_image_gzipped function.
  arm: cortex-a9: Fix cache-line size and associativity
  arm/virt: Use PSCI v0.2 function IDs in the DT when KVM uses PSCI v0.2
  target-arm: Rename QEMU PSCI v0.1 definitions
  target-arm: Implement MDSCR_EL1 as having state
  target-arm: Implement ARMv8 single-stepping for AArch32 code
  target-arm: Implement ARMv8 single-step handling for A64 code
  target-arm: A64: Avoid duplicate exit_tb(0) in non-linked goto_tb
  target-arm: Set PSTATE.SS correctly on exception return from AArch64
  target-arm: Correctly handle PSTATE.SS when taking exception to AArch32
  target-arm: Don't allow AArch32 to access RES0 CPSR bits
  target-arm: Adjust debug ID registers per-CPU
  target-arm: Provide both 32 and 64 bit versions of debug registers
  target-arm: Allow STATE_BOTH reginfo descriptions for more than cp14
  target-arm: Collect up the debug cp register definitions
  target-arm: Fix return address for A64 BRK instructions
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This reverts commit b0225c2c
(which breaks building with Xen enabled and also leaks memory).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It's a MemoryRegion and not an AddressSpace. But since it's single use,
just inline the get_system_memory() call to the only usage to remove it.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d6914047e10b956514cfaa5f391ef56c7d851b34.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This argument is a MemoryRegion and not an AddressSpace.

"Address space" means something quite different to "memory region"
in QEMU parlance so rename the variable to reduce confusion.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f666cf7f2318d9b461b1e320a45bf0d82da9b7dd.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

On aarch64 it is the bootloader's job to uncompress the kernel.  UEFI
and u-boot bootloaders do this automatically when the kernel is
gzip-compressed.

However the qemu -kernel option does not do this.  The following
command does not work:

  qemu-system-aarch64 [...] -kernel /boot/vmlinuz

because it tries to execute the gzip-compressed data.

This commit lets gzip-compressed kernels be uncompressed
transparently.

Currently this is only done when emulating aarch64.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-3-git-send-email-rjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As the name suggests this lets you load a ROM/disk image that is
gzipped.  It is uncompressed before storing it in guest memory.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-2-git-send-email-rjones@redhat.com
[PMM: removed stray space before ')']
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For A9, The cache associativity is 4 and the lines size is 32B.
Self identify in CCSIDR accordingly. Cache size remains at 16k.

QEMU doesn't emulate caches, but we should still report the correct
cache-line size to the guest. Some guests (like u-boot) complain if
the cache-line size mismatches a requested flush or invalidate
operation.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1de6bd40155a1d2f2e93e24b1b1d1d677a432641.1408346233.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The current code supplies the PSCI v0.1 function IDs in the DT even when
KVM uses PSCI v0.2.

This will break guest kernels that only support PSCI v0.1 as they will
use the IDs provided in the DT.  Guest kernels with PSCI v0.2 support
are not affected by this patch, because they ignore the function IDs in
the device tree and rely on the architecture definition.

Define QEMU versions of the constants and check that they correspond to
the Linux defines on Linux build hosts.  After this patch, both guest
kernels with PSCI v0.1 support and guest kernels with PSCI v0.2 should
work.

Tested on TC2 for 32-bit and APM Mustang for 64-bit (aarch64 guest
only).  Both cases tested with 3.14 and linus/master and verified I
could bring up 2 cpus with both guest kernels.  Also tested 32-bit with
a 3.14 host kernel with only PSCI v0.1 and both guests booted here as
well.

Cc: qemu-stable@nongnu.org
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The function IDs for PSCI v0.1 are exported by KVM and defined as
KVM_PSCI_FN_<something>.  To build using these defines in non-KVM code,
QEMU defines these IDs locally and check their correctness against the
KVM headers when those are available.

However, the naming scheme used for QEMU (almost) clashes with the PSCI
v0.2 definitions from Linux so to avoid unfortunate naming when we
introduce local PSCI v0.2 defines, rename the current local defines with
QEMU_ prependend and clearly identify the PSCI version as v0.1 in the
defines.

Cc: qemu-stable@nongnu.org
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Now that all the new code to support single-stepping is in
place, wire up the guest-visible MDSCR_EL1, so the guest
can enable single-stepping.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

ARMv8 single-stepping requires the exception level that controls
the single-stepping to be in AArch64 execution state, but the
code being stepped may be in AArch64 or AArch32. Implement the
necessary support code for single-stepping AArch32 code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Implement ARMv8 software single-step handling for A64 code:
correctly update the single-step state machine and generate
debug exceptions when stepping A64 code.

This patch has no behavioural change since MDSCR_EL1.SS can't
be set by the guest yet.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

If gen_goto_tb() decides not to link the two TBs, then the
fallback path generates unnecessary code:
 * if singlestep is enabled then we generate unreachable code
   after the gen_exception_internal(EXCP_DEBUG)
 * if singlestep is disabled then we will generate exit_tb(0)
   twice, once in gen_goto_tb() and once coming out of the
   main loop with is_jmp set to DISAS_JUMP

Correct these deficiencies by only emitting exit_tb() in the
non-singlestep case, in which case we can use DISAS_TB_JUMP
to suppress the main-loop exit_tb().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Set the PSTATE.SS bit correctly on exception returns from AArch64,
as required by the debug single-step functionality.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

When an exception is taken to AArch32, we must clear the PSTATE.SS
bit for the exception handler, and must also ensure that the SS bit
is not set in the value saved to SPSR_<mode>. Achieve both of these
aims by clearing the bit in uncached_cpsr before saving it to the SPSR.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

The CPSR has a new-in-v8 execution state bit (IL), and
also some state which has effects in AArch32 but appears
only in the SPSR format (SS) but is RES0 in the CPSR.

Add the IL bit to CPSR_EXEC, and enforce that guest direct
reads and writes to CPSR can't read or write the RES0
bits, so the guest can't get at the SS bit which we store
in uncached_cpsr. This includes not permitting exception
returns to copy reserved bits from an SPSR into CPSR.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Allow each CPU type to specify the value for the debug ID
registers, by putting them in the ARMCPU struct, and use
the resulting information to only expose the correct number
of watchpoint and breakpoint registers for the CPU.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Bring the 32 bit and 64 bit views of the debug registers into
line by providing the same set of registers in both cases.
(This still isn't a complete set, but it is consistent.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Currently the STATE_BOTH shorthand for allowing a single reginfo struct
to define handling for both AArch32 and AArch64 views of a register
only permits this where the AArch32 view is in cp15. It turns out that
the debug registers in cp14 also have neatly lined up encodings;
allow these also to share reginfo structs by permitting a STATE_BOTH
reginfo to specify the .cp field (and continue to default to 15 if
it is not specified).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

At the moment we have a mixed set of mostly dummy register
definitions for various debug related registers which have
been added piecemeal in order to get Linux kernels to boot.
In preparation for actually implementing debug support,
bring them all together into one place.

This commit doesn't change behaviour: we still expose
exactly the same registers and behaviour to the guest
in all configurations.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

When we take an exception resulting from a BRK instruction,
the architecture requires that the "preferred return address"
reported to the exception handler is the address of the BRK
itself, not the following instruction (like undefined
insns, and in contrast with SVC, HVC and SMC). Follow this,
rather than incorrectly reporting the address of the following
insn.

(We do get this correct for the A32/T32 BKPT insns.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org

SCSI changes that enable sending vendor-specific commands via virtio-scsi.

Memory changes for QOMification and automatic tracking of MR lifetime.

# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream:
  mtree: remove write-only field
  memory: Use canonical path component as the name
  memory: Use memory_region_name for name access
  memory: constify memory_region_name
  exec: Abstract away ref to memory region names
  loader: Abstract away ref to memory region names
  tpm_tis: remove instance_finalize callback
  memory: remove memory_region_destroy
  memory: convert memory_region_destroy to object_unparent
  ioport: split deletion and destruction
  nic: do not destroy memory regions in cleanup functions
  vga: do not dynamically allocate chain4_alias
  sysbus: remove unused function sysbus_del_io
  qom: object: move unparenting to the child property's release callback
  qom: object: delete properties before calling instance_finalize
  virtio-scsi: implement parse_cdb
  scsi-block, scsi-generic: implement parse_cdb
  scsi-block: extract scsi_block_is_passthrough
  scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
  scsi-bus: prepare scsi_req_new for introduction of parse_cdb
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/qmp-unstable/queue/qmp:
  monitor: fix use after free
  dump.c: Fix memory leak issue in cleanup processing for dump_init()
  monitor: Remove hardcoded watchdog event names
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The function monitor_fdset_dup_fd_find_remove() references member of
'mon_fdset' which - when remove flag is set - may be freed in function
monitor_fdset_cleanup().
remove is set by monitor_fdset_dup_fd_remove which in practice
does not need the returned value, so make it void,
and return -1 from monitor_fdset_dup_fd_find_remove.
Reported-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

In dump_init(), when failure occurs, need notice about 'fd' and memory
mapping. So call dump_cleanup() for it (need let all initializations at
front).

Also simplify dump_cleanup(): remove redundant 'ret' and redundant 'fd'
checking.
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NHani Benhabiles <hani@linux.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

* remotes/amit/for-2.2:
  virtio-serial: search for duplicate port names before adding new ports
  virtio-serial: create a linked list of all active devices
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Before adding new ports to VirtIOSerial devices, check if there's a
conflict in the 'name' parameter.  This ensures two virtserialports with
identical names are not initialized.

Reported-by: <mazhang@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

To ensure two virtserialports don't get added to the system with the
same 'name' parameter, we need to access all the ports on all the
devices added, and compare the names.

We currently don't have a list of all VirtIOSerial devices added to the
system.  This commit adds a simple linked list in which devices are put
when they're initialized, and removed when they go away.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>