Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu
切换分支/标签
  1. 06 9月, 2016 5 次提交
  3. 05 8月, 2016 1 次提交
  5. 27 7月, 2016 1 次提交
  7. 26 7月, 2016 1 次提交
    • D
      block: export LUKS specific data to qemu-img info · c7c4cf49
      由 Daniel P. Berrange 提交于 
      The qemu-img info command has the ability to expose format
specific metadata about volumes. Wire up this facility for
the LUKS driver to report on cipher configuration and key
slot usage.

    $ qemu-img info ~/VirtualMachines/demo.luks
    image: /home/berrange/VirtualMachines/demo.luks
    file format: luks
    virtual size: 98M (102760448 bytes)
    disk size: 100M
    encrypted: yes
    Format specific information:
        ivgen alg: plain64
        hash alg: sha1
        cipher alg: aes-128
        uuid: 6ddee74b-3a22-408c-8909-6789d4fa2594
        cipher mode: xts
        slots:
            [0]:
                active: true
                iters: 572706
                key offset: 4096
                stripes: 4000
            [1]:
                active: false
                key offset: 135168
            [2]:
                active: false
                key offset: 266240
            [3]:
                active: false
                key offset: 397312
            [4]:
                active: false
                key offset: 528384
            [5]:
                active: false
                key offset: 659456
            [6]:
                active: false
                key offset: 790528
            [7]:
                active: false
                key offset: 921600
        payload offset: 2097152
        master key iters: 142375

One somewhat undesirable artifact is that the data fields are
printed out in (apparently) random order. This will be addressed
later by changing the way the block layer pretty-prints the
image specific data.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1469192015-16487-3-git-send-email-berrange@redhat.com
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>
      c7c4cf49
  9. 20 7月, 2016 2 次提交
    • P
      block/gluster: add support for multiple gluster servers · 6c7189bb
      由 Prasanna Kumar Kalever 提交于 
      This patch adds a way to specify multiple volfile servers to the gluster
block backend of QEMU with tcp|rdma transport types and their port numbers.

Problem:

Currently VM Image on gluster volume is specified like this:

file=gluster[+tcp]://host[:port]/testvol/a.img

Say we have three hosts in a trusted pool with replica 3 volume in action.
When the host mentioned in the command above goes down for some reason,
the other two hosts are still available. But there's currently no way
to tell QEMU about them.

Solution:

New way of specifying VM Image on gluster volume with volfile servers:
(We still support old syntax to maintain backward compatibility)

Basic command line syntax looks like:

Pattern I:
 -drive driver=gluster,
        volume=testvol,path=/path/a.raw,[debug=N,]
        server.0.type=tcp,
        server.0.host=1.2.3.4,
        server.0.port=24007,
        server.1.type=unix,
        server.1.socket=/path/socketfile

Pattern II:
 'json:{"driver":"qcow2","file":{"driver":"gluster",
       "volume":"testvol","path":"/path/a.qcow2",["debug":N,]
       "server":[{hostinfo_1}, ...{hostinfo_N}]}}'

   driver      => 'gluster' (protocol name)
   volume      => name of gluster volume where our VM image resides
   path        => absolute path of image in gluster volume
  [debug]      => libgfapi loglevel [(0 - 9) default 4 -> Error]

  {hostinfo}   => {{type:"tcp",host:"1.2.3.4"[,port=24007]},
                   {type:"unix",socket:"/path/sockfile"}}

   type        => transport type used to connect to gluster management daemon,
                  it can be tcp|unix
   host        => host address (hostname/ipv4/ipv6 addresses/socket path)
   port        => port number on which glusterd is listening.
   socket      => path to socket file

Examples:
1.
 -drive driver=qcow2,file.driver=gluster,
        file.volume=testvol,file.path=/path/a.qcow2,file.debug=9,
        file.server.0.type=tcp,
        file.server.0.host=1.2.3.4,
        file.server.0.port=24007,
        file.server.1.type=unix,
        file.server.1.socket=/var/run/glusterd.socket
2.
  'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol",
         "path":"/path/a.qcow2","debug":9,"server":
         [{"type":"tcp","host":"1.2.3.4","port":"24007"},
          {"type":"unix","socket":"/var/run/glusterd.socket"}
         ]}}'

This patch gives a mechanism to provide all the server addresses, which are in
replica set, so in case host1 is down VM can still boot from any of the
active hosts.

This is equivalent to the backup-volfile-servers option supported by
mount.glusterfs (FUSE way of mounting gluster volume)

credits: sincere thanks to all the supporters
Signed-off-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1468947453-5433-6-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: NJeff Cody <jcody@redhat.com>
      6c7189bb
    • P
      block/gluster: using new qapi schema · 7edac2dd
      由 Prasanna Kumar Kalever 提交于 
      this patch adds 'GlusterServer' related schema in qapi/block-core.json

[Jeff: minor fix-ups of comments and formatting, per patch reviews]
Signed-off-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1468947453-5433-5-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: NJeff Cody <jcody@redhat.com>
      7edac2dd
  11. 19 7月, 2016 2 次提交
  13. 13 7月, 2016 7 次提交
  15. 05 7月, 2016 1 次提交
    • E
      blkdebug: Set request_alignment during .bdrv_refresh_limits() · 835db3ee
      由 Eric Blake 提交于 
      We want to eventually stick request_alignment alongside other
BlockLimits, but first, we must ensure it is populated at the
same time as all other limits, rather than being a special case
that is set only when a block is first opened.

Note that when the user does not provide "align", then we were
defaulting to bs->request_alignment - but at this stage in the
initialization, that was always 512.  We were also rejecting an
explicit "align":0 from the user; this patch now allows that,
as an explicit request for the default alignment (which may not
always be 512 in the future).

qemu-iotests 77 is particularly sensitive to the fact that we
can specify an artificial alignment override in blkdebug, and
that override must continue to work even when limits are
refreshed on an already open device.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
      835db3ee
  17. 12 5月, 2016 1 次提交
  19. 30 3月, 2016 2 次提交
    • D
      block: add generic full disk encryption driver · 78368575
      由 Daniel P. Berrange 提交于 
      Add a block driver that is capable of supporting any full disk
encryption format. This utilizes the previously added block
encryption code, and at this time supports the LUKS format.

The driver code is capable of supporting any format supported
by the QCryptoBlock module, so it registers one block driver
for each format. This patch only registers the "luks" driver
since the "qcow" driver is there only for back-compatibility
with existing qcow built-in encryption.

New LUKS compatible volumes can be formatted using qemu-img
with defaults for all settings.

$ qemu-img create --object secret,data=123456,id=sec0 \
      -f luks -o key-secret=sec0 demo.luks 10G

Alternatively the cryptographic settings can be explicitly
set

$ qemu-img create --object secret,data=123456,id=sec0 \
      -f luks -o key-secret=sec0,cipher-alg=aes-256,\
                 cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \
      demo.luks 10G

And query its size

$ qemu-img info demo.img
image: demo.img
file format: luks
virtual size: 10G (10737418240 bytes)
disk size: 132K
encrypted: yes

Note that it was not necessary to provide the password
when querying info for the volume. The password is only
required when performing I/O on the volume

All volumes created by this new 'luks' driver should be
capable of being opened by the kernel dm-crypt driver.

The only algorithms listed in the LUKS spec that are
not currently supported by this impl are sha512 and
ripemd160 hashes and cast6 cipher.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
[ kwolf - Added #include to resolve conflict with da34e65c ]
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
      78368575
    • K
      block: Remove cache.writeback from blockdev-add · aaa436f9
      由 Kevin Wolf 提交于 
      The WCE bit is a frontend property and should not be part of the backend
configuration. This is especially important because the same BDS can be
used by different users with different WCE requirements.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
      aaa436f9
  21. 18 3月, 2016 1 次提交
    • E
      qapi: Use anonymous bases in QMP flat unions · 3666a97f
      由 Eric Blake 提交于 
      Now that the generator supports it, we might as well use an
anonymous base rather than breaking out a single-use Base
structure, for all three of our current QMP flat unions.

Oddly enough, this change does not affect the resulting
introspection output (because we already inline the members of
a base type into an object, and had no independent use of the
base type reachable from a command).

The case_whitelist now has to list the name of an implicit
type; which is not too bad (consider it a feature if it makes
it harder for developers to make the whitelist grow :)
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-16-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      3666a97f
  23. 22 2月, 2016 3 次提交
  25. 03 2月, 2016 3 次提交
  27. 08 1月, 2016 1 次提交
  29. 17 12月, 2015 2 次提交
    • E
      blkdebug: Avoid '.' in enum values · 5be5b776
      由 Eric Blake 提交于 
      Our qapi conventions document that '.' should only be used in
the prefix of downstream names.  BlkdebugEvent was a lone
exception to this.  Changing this is not backwards compatible
to the 'blockdev-add' QMP command; however, that command is
not yet fully stable.  It can also be argued that the testsuite
is the biggest user of blkdebug, and that any other user can
be taught to deal with the change by paying attention to
introspection results.

Done with:

$ for str in \
     l1_grow.{alloc,write,activate}_table \
     l2_alloc.{cow_read,write} \
     refblock_alloc.{hookup,write,write_blocks,write_table,switch_table} \
     pwritev_rmw.{head,after_head,tail,after_tail}; do
   str1=$(echo "$str" | sed 's/\./\\./')
   str2=$(echo "$str" | sed 's/\./_/')
   git grep -l "$str1" | xargs -r sed -i "s/$str1/$str2/g"
 done

followed by a manual touchup to test 77 to keep the test working.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-21-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      5be5b776
    • E
      blkdebug: Merge hand-rolled and qapi BlkdebugEvent enum · a31939e6
      由 Eric Blake 提交于 
      No need to keep two separate enums, where editing one is likely
to forget the other.  Now that we can specify a qapi enum prefix,
we don't even have to change the bulk of the uses.

get_event_by_name() could perhaps be replaced by qapi_enum_parse(),
but I left that for another day.

CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-20-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
      a31939e6
  31. 11 12月, 2015 1 次提交
  33. 17 11月, 2015 1 次提交
  35. 12 11月, 2015 5 次提交