Fix "warning: array subscript has type 'char'" on NetBSD.
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

It was introduced with commit 54936004
as host_page_bits but never used.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Makes it easier to catch the bug in gdb as there is no need to set an
explicit breakpoint.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

If pkg-config doesn't exist then make configure fail immediately
with a useful error message. Now that glib is a required dependency,
proceeding despite the missing pkg-config will just cause us to
fail later with a misleading message about glib not being present.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Remove also two assert statements which were the last remaining users.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This reverts commit 46f08792.

This was not supposed to be applied to mainline.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

replace alloc/free with struct members.
todo: smash with initial implementation after
testing.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

QEMUFile * is only intended for migration nowadays.  Using it for
anything else just adds pain and a layer of buffers for no good
reason.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
CC:  malc <av1474@comtv.ru>
Signed-off-by: Nmalc <av1474@comtv.ru>

QEMUFile * is only intended for migration nowadays.  Using it for
anything else just adds pain and a layer of buffers for no good
reason.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
CC: malc <av1474@comtv.ru>
Signed-off-by: Nmalc <av1474@comtv.ru>

The config string is variously delimited by =, @, and /, depending on the
field.  Allow these characters to be escaped by preceeding them with \.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Now that iothread is always compiled sending a signal seems only an
additional step. This patch also avoid writing to two pipe (one from signal
and one in qemu_service_io).

Work with kvm enabled or disabled. strace output is more readable (less syscalls).

[ kwolf: Merged build fix by Paolo Bonzini ]
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When assigning a 32-bit value to cmd->xfer (which is 64-bits)
it can be erroneously sign extended because the intermediate
32-bit computation is signed.  Fix this by standardizing on
the ld*_be_p functions.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

librbd recently added async writeback and flush support.  If the new
rbd_flush() call is available, call it.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Properly document the configuration string syntax and semantics.  Remove
(out of date) details about the librbd implementation.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If we are reading from the default config location, ignore any failures.
It is perfectly legal for the user to specify exactly the options they need
and to not rely on any config file.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

I've found that FreeBSD AHCI driver doesn't work with AHCI hardware
emulation of QEMU 0.15.0. I believe the problem is on QEMU's side. As I
see, it clears port's Interrupt Enable register each time when reset of
any level happens. Is is reasonable for the global controller reset. It
is probably not good, but acceptable for FreeBSD driver for the port
hard reset. But it is IMO wrong for the device soft reset. None of real
hardware I know behaves that way.
Signed-off-by: NAlexander Motin <mav@FreeBSD.org>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Release extent_file on error in vmdk_parse_extents. Added closing files
in freeing extents.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It will not be needed for reads and writes if the HBA provides a sglist.
In addition, this lets scsi-disk refuse commands with an excessive
allocation length, as well as limit memory on usual well-behaved guests.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Also, consistently use qiov.size instead of iov.iov_len.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This fixes various problems with completion/cancellation:

* if the io_func fails to get an AIOCB, the callback wasn't called

* If DMA encounters a bounce buffer conflict, and the DMA operation is
canceled before the bottom half fires, bad things happen.

* memory is not unmapped after cancellation, again causing problems
when doing DMA to I/O areas

* cancellation could leak the iovec

* the callback was missed if the I/O operation failed without returning
an AIOCB

and probably more that I've missed.  The patch fixes them by sharing
the cleanup code between completion and cancellation.  The dma_bdrv_cb
now returns a boolean completed/not completed flag, and the wrapper
dma_continue takes care of tasks to do upon completion.

Most of these are basically impossible in practice, but it is better
to be tidy...
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Target-independent code cannot construct sglists, but it can take
them from the outside as a black box.  Allow this.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Support bridge filtering on top of the memory
API as suggested by Avi Kivity:

Create a memory region for the bridge's address space.  This region is
not directly added to system_memory or its descendants.  Devices under
the bridge see this region as its pci_address_space().  The region is
as large as the entire address space - it does not take into account
any windows.

For each of the three windows (pref, non-pref, vga), create an alias
with the appropriate start and size.  Map the alias into the bridge's
parent's pci_address_space(), as subregions.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The switch to the new memory API caused the following problem:

The pci device may call pci_register_bar() to use PCI bus's address
space.  But we don't init PCI bus's address space if it is not bus
0.  A crash was reported:
http://lists.gnu.org/archive/html/qemu-devel/2011-08/msg02243.html

More work will be needed to make bridge filtering work correctly
with the memory API.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Obsoleted by f64e02b6.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Fix up some erroneous comments in code:
interrupt pins are named A-D, the
interrupt pin register is always readonly
and isn't zeroed out on reset.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

eepro100 was the last user. Now pci_add_capability is powerful enough.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

I found no rationale for this in the logs, and it is quite bad because
it will make scsi-generic unsafe WRT power failures.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_flush is supposed to use 0/-errno return values
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The nbd kernel module cannot enable DISCARD requests unless it is
informed about it.  The flags field in the header is used for this,
and this patch adds support for it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>