Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

bdrv_read and bdrv_write return negative errno values, not -1.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Allow sending up to 16 requests, and drive the replies to the coroutine
that did the request.  The code is written to be exactly the same as
before this patch when MAX_NBD_REQUESTS == 1 (modulo the extra mutex
and state).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

qemu-nbd has a limit of slightly less than 1M per request.  Work
around this in the nbd block driver.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Outside coroutines, avoid busy waiting on EAGAIN by temporarily
making the socket blocking.

The API of qemu_recvv/qemu_sendv is slightly different from
do_readv/do_writev because they do not handle coroutines.  It
returns the number of bytes written before encountering an
EAGAIN.  The specificity of yielding on EAGAIN is entirely in
qemu-coroutine.c.
Reviewed-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Response format r6 includes a subset of the status bits;
clear the clear-on-read bits which are read by an r6 response.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Fix some bugs in our implementation of the APP_CMD status bit:
 * the response to an ACMD should have APP_CMD set, not cleared
 * if an illegal ACMD is sent then the next command should be
   handled as a normal command

This requires that we split "card is expecting an ACMD" from
the state of the APP_CMD status bit (the latter indicates
both "expecting ACMD" and "that was an ACMD").
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Correct how we handle the type B ("cleared on valid command")
status bits. In particular, the CURRENT_STATE bits in a response
should be the state of the card when it received that command,
not the state when it received the preceding command. (This is
one of the issues noted in LP:597641.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

App commands in an invalid state should set ILLEGAL_COMMAND, not
merely return a zero response.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Handle returning CRC and locked-card errors in the same code path
we use for other responses. This makes no difference in behaviour
but means that these error responses will be printed by the debug
logging code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Add an extra sd_illegal value to the sd_rsp_type_t enum so that
sd_app_command() and sd_normal_command() can tell sd_do_command()
that the command was illegal. This is needed so we can do things
like reset certain status bits only on receipt of a valid command.
For the moment, just use it to pull out the setting of the
ILLEGAL_COMMAND status bit into sd_do_command().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Fix a typo that meant that ADDRESS_ERRORs setting or clearing write
protection would clear every other bit in the status register.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

If we fail to validate the CRC for an SD command we should be setting
COM_CRC_ERROR, not clearing it. (This bug actually has no effect currently
because sd_req_crc_validate() always returns success.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Add a clarifying comment about what the CARD_STATUS_[ABC]
macros are defining.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Fix bugs in the code determining whether to accept a command when the
SD card is locked. Most notably, we had the condition completely
reversed, so we would accept all the commands we should refuse and
refuse all the commands we should accept. Correct this by refactoring
the enormous if () clause into a separate function.
We had also missed ACMD42 off the list of commands which are accepted
in locked state: add it.

This is one of the two problems reported in LP:597641.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Now that all sysbus MMIO regions are MemoryRegions, mmio[n].memory
is never NULL, and we can remove some unnecessary conditionals.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

since commit f9b29ca03 included in release 2.31 (docs below say 2.32 but
that is not correct) and onwards g_thread_init is deprecated and calling
it is not required:

 http://developer.gnome.org/glib/unstable/glib-Deprecated-Thread-APIs.html#g-thread-init

 g_thread_init has been deprecated since version 2.32 and should not be
 used in newly-written code. This function is no longer necessary. The
 GLib threading system is automatically initialized at the start of your
 program.

Fixes bulid failure when warnings are treated as errors on fedora 17.

I only tested the change to vl.c, and copy pasted to the two other
locations (couldn't decide if a wrapper for calling g_thread_init is
uglier).
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

NULL is a valid bus/device, so there is no change in behaviour.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Stored dates are no more 1970-01-01 (+ run time), but have a real meaning.
If someone wants to have comparable timestamps accross boots, it is
possible to start qemu with -rtc to give the startup date.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This prevents data of a previous run to be seen in the new dump file.
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The peripheral[-anon] containers are initialized lazily but since they sit on
sysbus, they can not be created after realize.  This was causing an abort() to
occur during hotplug if no -device option was used.

This was spotted by qemu-test::device-add.sh
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This function is not longer in use so remove it.
Signed-off-by: NBenoît Canet <benoit.canet@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Expose only one container MemoryRegion to sysbus.
(Peter Maydell's idea)
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBenoît Canet <benoit.canet@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The isa region is not exposed as a sysbus region because the iobr
register contains its address and use it to remap dynamically
the region. (Peter Maydell's idea)
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBenoît Canet <benoit.canet@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>