Currently there are warnings about flex and bison being missing when
building in the centos6 image:

    make[1]: flex: Command not found
             BISON dtc-parser.tab.c
    make[1]: bison: Command not found

Add them.
Reported-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <20170524005206.31916-1-famz@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NFam Zheng <famz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <20170505032340.26467-5-famz@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>

It is used by qemu-iotests.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <20170505032340.26467-3-famz@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>

We've used --add-current-user to create a user in the image, use it to
run tests, because root has too much priviledge, and can surprise test
cases.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <20170505032340.26467-2-famz@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>

Queued s390 patches

# gpg: Signature made Tue 13 Jun 2017 21:22:41 BST
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-s390-20170613:
  s390x/cpumodel: wire up cpu type + id for TCG
  target/s390x: rework PGM interrupt psw.addr handling
  target/s390x: correctly indicate PER nullification
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

migration/next for 20170614

# gpg: Signature made Wed 14 Jun 2017 11:16:21 BST
# gpg:                using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/juanquintela/tags/migration/20170614:
  migration: Don't create decompression threads if not enabled
  migration: Test for disabled features on reception
  migration: Remove unneeded includes
  migration: fix incorrect enable return path
  migration: Fix compilation with older compilers
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>

--

I removed the [HACK] part because previous patch just check that
compression pages are not received.

Right now, if we receive a compressed page while this features are
disabled, Bad Things (TM) can happen.  Just add a test for them.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>

--

I had XBZRLE here also, but it don't need extra resources on
destination, only on source.  Additionally libvirt don't enable it on
destination, so don't put it here.

- initialize invalid_flags at declaration time.
- remove extra space (peter)

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>

0425dc97 is actually v1 of that patch, but it was accidentally
merged (while there was a v2). That will cause problem when we try to
migrate to some old QEMUs when return path is not really there. Let's
fix it, then squashing this patch with 0425dc97 will be exactly patch
content of v2.

Fixes: 0425dc97 ("migration: isolate return path on src")
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

That typedefs are needed on both files.  New compilers (F25 where I
work) don't complain about repeating a typedef.  But older ones
complain.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>

Let's properly expose the CPU type (machine-type number) via "STORE CPU
ID" and "STORE SUBSYSTEM INFORMATION".

As TCG emulates basic mode, the CPU identification number has the format
"Annnnn", whereby A is the CPU address, and n are parts of the CPU serial
number (0 for us for now).

A specification exception will be injected if the address is not aligned
to a double word. Low address protection will not be checked as
we're missing some more general support for that.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170609133426.11447-3-david@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

We can tell from the program interrupt code, whether a program interrupt
has to forward the address in the PGM new PSW
(suppressing/terminated/completed) to point at the next instruction, or
if it is nullifying and the PSW address does not have to be incremented.

So let's not modify the PSW address outside of the injection path and
handle this internally. We just have to handle instruction length
auto detection if no valid instruction length can be provided.

This should fix various program interrupt injection paths, where the
PSW was not properly forwarded.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170609142156.18767-3-david@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170609142156.18767-2-david@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

target-arm queue:
 * vITS: Support save/restore
 * timer/aspeed: Fix timer enablement when reload is not set
 * aspped: add temperature sensor device
 * timer.h: Provide better monotonic time on ARM hosts
 * exynos4210: various cleanups
 * exynos4210: support system poweroff

# gpg: Signature made Tue 13 Jun 2017 15:05:49 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20170613:
  hw/intc/arm_gicv3_its: Allow save/restore
  hw/intc/arm_gicv3_kvm: Implement pending table save
  hw/intc/arm_gicv3_its: Implement state save/restore
  kvm-all: Pass an error object to kvm_device_access
  timer/aspeed: fix timer enablement when a reload is not set
  aspeed: add a temp sensor device on I2C bus 3
  hw/misc: add a TMP42{1, 2, 3} device model
  timer.h: Provide better monotonic time
  hw/misc/exynos4210_pmu: Add support for system poweroff
  hw/intc/exynos4210_gic: Constify array of combiner interrupts
  hw/arm/exynos: Use type define instead of hard-coded a9mpcore_priv string
  hw/arm/exynos: Declare local variables in some order
  hw/arm/exynos: Move DRAM initialization next boards
  hw/timer/exynos4210_mct: Remove unused defines
  hw/timer/exynos4210_mct: Cleanup indentation and empty new lines
  hw/timer/exynos4210_mct: Fix checkpatch style errors
  hw/intc/exynos4210_gic: Use more meaningful name for local variable
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We change the restoration priority of both the GICv3 and ITS. The
GICv3 must be restored before the ITS and the ITS needs to be restored
before PCIe devices since it translates their MSI transactions.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Message-id: 1497023553-18411-5-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch adds the flush of the LPI pending bits into the
redistributor pending tables. This happens on VM stop.

There is no explicit restore as the tables are implicitly sync'ed
on ITS table restore and on LPI enable at redistributor level.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1497023553-18411-4-git-send-email-eric.auger@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We need to handle both registers and ITS tables. While
register handling is standard, ITS table handling is more
challenging since the kernel API is devised so that the
tables are flushed into guest RAM and not in vmstate buffers.

Flushing the ITS tables on device pre_save() is too late
since the guest RAM is already saved at this point.

Table flushing needs to happen when we are sure the vcpus
are stopped and before the last dirty page saving. The
right point is RUN_STATE_FINISH_MIGRATE but sometimes the
VM gets stopped before migration launch so let's simply
flush the tables each time the VM gets stopped.

For regular ITS registers we just can use vmstate pre_save()
and post_load() callbacks.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1497023553-18411-3-git-send-email-eric.auger@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In some circumstances, we don't want to abort if the
kvm_device_access fails. This will be the case during ITS
migration, in case the ITS table save/restore fails because
the guest did not program the vITS correctly. So let's pass an
error object to the function and return the ioctl value. New
callers will be able to make a decision upon this returned
value.

Existing callers pass &error_abort which will cause the
function to abort on failure.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Message-id: 1497023553-18411-2-git-send-email-eric.auger@redhat.com
[PMM: wrapped long line]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When a timer is enabled before a reload value is set, the controller
waits for a reload value to be set before starting decrementing. This
fix tries to cover that case by changing the timer expiry only when
a reload value is valid.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Message-id: 1496739312-32304-1-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Temperatures can be changed from the monitor with :

	(qemu) qom-set /machine/unattached/device[2] temperature0 12000
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 1496739230-32109-3-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

Largely inspired by the TMP105 temperature sensor, here is a model for
the TMP42{1,2,3} temperature sensors.

Specs can be found here :

	http://www.ti.com/lit/gpn/tmp421Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 1496739230-32109-2-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

Tested and confirmed that the stretch i386 debian qcow2 image on a
raspberry pi 2 works.

Fixes: LP#: 893208 <https://bugs.launchpad.net/qemu/+bug/893208/>
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 20170418191817.10430-1-bobby.prani@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

On all Exynos-based boards, the system powers down itself by driving
PS_HOLD signal low - eight bit in PS_HOLD_CONTROL register of PMU.
Handle writing to respective PMU register to fix power off failure:

    reboot: Power down
    Unable to poweroff system
    shutdown: 31 output lines suppressed due to ratelimiting
    Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000

    CPU: 0 PID: 1 Comm: shutdown Not tainted 4.11.0-rc8 #846
    Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
    [<c031050c>] (unwind_backtrace) from [<c030ba6c>] (show_stack+0x10/0x14)
    [<c030ba6c>] (show_stack) from [<c05b2800>] (dump_stack+0x88/0x9c)
    [<c05b2800>] (dump_stack) from [<c03d3140>] (panic+0xdc/0x268)
    [<c03d3140>] (panic) from [<c0343614>] (do_exit+0xa90/0xab4)
    [<c0343614>] (do_exit) from [<c035f2dc>] (SyS_reboot+0x164/0x1d0)
    [<c035f2dc>] (SyS_reboot) from [<c0307c80>] (ret_fast_syscall+0x0/0x3c)

Additionally the initial value of PS_HOLD has to be changed because
recent Linux kernel (v4.12-rc1) uses regmap cache for this access.
When the register is kept at reset value, the kernel will not issue a
write to it.  Usually the bootloader sets the eight bit of PS_HOLD high
so mimic its existence here.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The static array of interrupt combiner mappings is not modified so it
can be made const for code safeness.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use a define for a9mpcore_priv device type name instead of hard-coded
string.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Bring some more readability by declaring local function variables: first
initialized ones and then the rest (with reversed-christmas-tree order).
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Before QOM-ifying the Exynos4 SoC model, move the DRAM initialization
from exynos4210.c to exynos4_boards.c because DRAM is board specific,
not SoC.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Remove defines not used anywhere.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Statements under 'case' were in some places wrongly indented bringing
confusion and making the code less readable.  Remove also few unneeded
blank lines.  No functional changes.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix checkpatch errors:
1. ERROR: spaces required around that '+' (ctx:VxV)
2. ERROR: spaces required around that '&' (ctx:VxV)

No functional changes.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

There are to SysBusDevice variables in exynos4210_gic_realize()
function: one for the device itself and second for arm_gic device.  Add
a prefix "gic" to the second one so it will be easier to understand the
code.

While at it, put local uninitialized 'i' variable at the end, next to
other uninitialized ones.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Tue 13 Jun 2017 14:35:25 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  monitor: resurrect handle_qmp_command trace event
  monitor: add handle_hmp_command trace event
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit 104fc302 ("qmp: Drop duplicated
QMP command object checks") removed the call to
trace_handle_qmp_command() while eliminating code duplication.

This patch brings the trace event back so QEMU-internal trace events can
be correlated with the QMP commands that caused them.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20170605104216.22429-3-stefanha@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

It is often useful to correlate QEMU-internal events with monitor
commands that caused them.  Trace the full HMP command being executed.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20170605104216.22429-2-stefanha@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

migration/next for 20170613

# gpg: Signature made Tue 13 Jun 2017 10:01:45 BST
# gpg:                using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/juanquintela/tags/migration/20170613:
  migration: Move migration.h to migration/
  migration: Move remaining exported functions to migration/misc.h
  migration: create global_state.c
  migration: ram_control_* are implemented in qemu_file
  migration: Commands are only used inside migration.c
  migration: Move constants to savevm.h
  migration: Move dump_vmsate_json_to_file() to misc.h
  migration: Split registration functions from vmstate.h
  migration: Move self_announce_delay() to misc.h
  migration: Remove MigrationState from migration_channel_incomming()
  ram: Now POSTCOPY_ACTIVE is the same that STATUS_ACTIVE
  ram: Print block stats also in the complete case
  migration: Don't try to set *errp directly
  migration: isolate return path on src
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Fri 09 Jun 2017 13:41:59 BST
# gpg:                using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98  D624 BDBE 7B27 C0DE 3057

* remotes/cody/tags/block-pull-request:
  block/gluster.c: Handle qdict_array_entries() failure
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue 2017-06-09

This batch contains more patches to rework the pseries machine hotplug
infrastructure, plus an assorted batch of bugfixes.

It contains a start on fixes to restore migration from older machine
types on older versions which was broken by some xics changes.  There
are still a few missing pieces here, though.

# gpg: Signature made Fri 09 Jun 2017 06:26:03 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.10-20170609:
  Revert "spapr: fix memory hot-unplugging"
  xics: drop ICPStateClass::cpu_setup() handler
  xics: setup cpu at realize time
  xics: pass appropriate types to realize() handlers.
  xics: introduce macros for ICP/ICS link properties
  hw/cpu: core.c can be compiled as common object
  hw/ppc/spapr: Adjust firmware name for PCI bridges
  xics: add reset() handler to ICPStateClass
  pnv_core: drop reference on ICPState object during CPU realization
  spapr: Rework DRC name handling
  spapr: Fold spapr_phb_{add,remove}_pci_device() into their only callers
  spapr: Change DRC attach & detach methods to functions
  spapr: Clean up handling of DR-indicator
  spapr: Clean up RTAS set-indicator
  spapr: Don't misuse DR-indicator in spapr_recover_pending_dimm_state()
  spapr: Clean up DR entity sense handling
  pseries: Correct panic behaviour for pseries machine type
  spapr: fix memory leak in spapr_memory_pre_plug()
  target/ppc: fix memory leak in kvmppc_is_mem_backend_page_size_ok()
  target/ppc: pass const string to kvmppc_is_mem_backend_page_size_ok()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pc, pci, vhost: fixes

Some fixes all over the place.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 08 Jun 2017 20:04:24 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  hw/pcie: fix the generic pcie root port to support migration
  nvdimm acpi: fix region format interface code
  vhost-user-bridge: fix iov_restore_front() warning
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Nothing uses it outside of migration.h
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>