Open mouse channel.  Now you can move the guests mouse pointer.
No tablet / absolute positioning (yet) though.

Open keyboard channel.  Now you can type into the spice client and the
keyboard events are sent to your guest.  You'll need some other display
like vnc to actually see the guest responding to them though.

Add -spice command line switch.  Has support setting passwd and port for
now.  With this patch applied the spice client can successfully connect
to qemu.  You can't do anything useful yet though.

Write compile commands and messages to config.log.
Useful for debugging configure.

This patch drops DT_VNC.  The display types are only used to select
select the local display (i.e. curses, sdl, coca, ...).  Remote
displays (for now only vnc, spice will follow) can be enabled
independently.

The OpenIndiana (Solaris) e1000g driver drops frames that are too long
or too short.  It expects to receive frames of at least the Ethernet
minimum size.  ARP requests in particular are small and will be dropped
if they are not padded appropriately, preventing a Solaris VM from
becoming visible on the network.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

If the linker supports the flags --dynamicbase, --no-seh,
or --nxcompat, use them.

Tested on Windows Vista: Process Explorer reports that ASLR and DEP
are in use. No effect seen on Wine or Windows XP.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

If the compiler supports the warning flag -Wnested-externs, use it.

Avoid the only warning by moving the declaration of xml_builtin to a
more proper place.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If the compiler supports the warning flag -Wempty-body, use it.

Adjust the code to avoid the warnings.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If the compiler supports the following warning flags, use them:

-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers
-Wmissing-include-dirs

Currently, these flags don't produce any warnings.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If the compiler supports the warning flag -Wtype-limits, use it.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix SSSR TFN logic: TX FIFO is never filled, so it is always in
underrun condition if SSP is enabled.

This also avoids a gcc warning with -Wtype-limits.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The parameter for yield should be handled as a signed integer
for the comparisons to have any effect.

This also avoids a gcc warning with -Wtype-limits.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The hack added by c5b76b38 was not
enough to avoid warnings with gcc flag -Wtype-limits. Add a new macro
to fix both problems.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The signedness of enum types depend on the compiler implementation.
Therefore the check for negative values may or may not be meaningful.

Fix by explicitly casting to a signed integer.

Since the values are also checked earlier against event_names
table, this is an internal error. Change the 'if' to 'assert'.

This also avoids a warning with GCC flag -Wtype-limits.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Remove checks which were made useless by r5849,
8da3ff18.

This also avoids a warning with GCC flag -Wtype-limits.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use range_covers_byte() instead of comparisons.

This avoids some warnings with GCC flag -Wtype-limits.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Extract range functions from pci.h. These will be used by later patches
by non-PCI devices. Adjust current users.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Because of the use of unsigned type, possible errors during
load were ignored.

Fix by using a signed type.

This also avoids a warning with GCC flag -Wtype-limits.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

-1ul is unsigned long, which does not necessarily match abi_ulong
type.

Fix by using abi_long instead.

This also avoids a warning with GCC flag -Wtype-limits.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

On many systems, socklen_t is defined as unsigned. This means that
checks for negative values are not meaningful.

Fix by explicitly casting to a signed integer.

This also avoids some warnings with GCC flag -Wtype-limits.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Because of the use of unsigned types, possible errors during
BIOS or kernel load were ignored.

Fix by using a signed type.

This also avoids some warnings with GCC flag -Wtype-limits.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

IEEE 802.3 standard requires Ethernet frames to be at least 64 bytes long.
If it is not the case, they will be considered as runt frames, and may be ignored by netcard and/or OS
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Packets with TTL=1 may be directed to local network (DHCP/DNS servers for example), so don't discard them
This is required by old versions of NetBSD which send DHCP DISCOVER packets with TTL=1
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

According to the Book3S spec, the interrupt context starts with an MSR
value that is rather simple. If we leave out the HV case, it's almost
always 0.

To reflect this, let's redesign the way that MSR value gets calculated.
Using this, we also squash the bug where MSR_POW can slip through into
the interrupt handler MSR.
Reported-by: NThomas Monjalon <thomas.monjalon@openwide.fr>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The lwarx and ldarx instructions have a bit to give some hint to the
CPU which is safe to ignore. We currently refuse to accept any instruction
with that bit set, as it used to be declared MBZ.

Let's remove the reserved bit and make the instruction work as expected.
This fixes Linux boot for ppc64.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This is the patch to update serial port parameters after guest is
already loaded.
Signed-off-by: NMichal Novotny <minovotn@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

file.index is unsigned, hence 'while (--file.index >= 0)'
will loop > forever. Change to while (file.index-- > 0).
Reported-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Macros normally should not end with a semicolon,
otherwise their usage results in two statements
where only one statement was expected.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NMichal Novotny <minovotn@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Sending ESP a command caused it to trigger DMA immediately
even if DMA was not enabled at the DMA controller.

Add a signal from DMA controller to ESP to tell ESP about changes in
DMA enable bit. Also use the correct function for setting up GPIO outputs.

This fixes NetBSD 1.6.1 through 3.0 boot.

Thanks to Artyom Tarasenko for extensive debugging of the problem.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Invalid TLB entries are normal and should not spam the log.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The /bin/sh in Milax has problems with the regex:
Error: invalid trace backend
Please choose a supported trace backend.

Fix it by escaping ')' like the regexes with '('.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>