This also requires little more than adding the new argument to
scsi_device_find, and the qdev property.  All devices by default
end up on channel 0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This only requires changes in two places: in SCSIBus, we need to look
for a free LUN if somebody creates a device with a pre-existing scsi-id
but the default LUN (-1, meaning "search for a free spot"); in vSCSI,
we need to actually parse the LUN according to the SCSI spec.

For vSCSI, max_target/max_lun are set according to the logical unit
addressing format in SAM.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Change the devs array into a linked list, and add a scsi_device_find
function to navigate the children list instead.  This lets the SCSI
bus use more complex addressing, and HBAs can talk to the correct device
when there are multiple LUNs per target.

scsi_device_find may return another LUN on the same target if none is
found that matches exactly.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Building on the previous patch, this one adds a media change callback
to scsi-disk.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Reporting media change events via unit attention sense codes requires
a small state machine: first report "NO MEDIUM", then report "MEDIUM MAY
HAVE CHANGED".  Unfortunately there is no good hooking point for the
device to notice that its pending unit attention condition has been
reported.  This patch reworks the generic machinery to add one.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The definitions in ide/internal.h are duplicates, since ATAPI commands
actually come from SCSI.  Use the ones in scsi-defs.h and move the
missing ones there.  Two exceptions:

- MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry"
page in scsi-disk.c.  It is unused, so pick the latter.

- GPCMD_* is left in ide/internal.h, at least for now.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When assigning a 32-bit value to cmd->xfer (which is 64-bits)
it can be erroneously sign extended because the intermediate
32-bit computation is signed.  Fix this by standardizing on
the ld*_be_p functions.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Don't fail when tray is already open.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Remove duplicate entries from SCSI command table, spotted by
clang analyzer:
/src/qemu/hw/scsi-bus.c:979:40: warning: initializer overrides prior initialization of this subobject
        [ ERASE_16                 ] = "ERASE_16",
/src/qemu/hw/scsi-bus.c:978:40: note: previous initialization is here
        [ WRITE_SAME_16            ] = "WRITE_SAME_16",
/src/qemu/hw/scsi-bus.c:984:40: warning: initializer overrides prior initialization of this subobject
        [ MAINTENANCE_IN           ] = "MAINTENANCE_IN",
/src/qemu/hw/scsi-bus.c:917:40: note: previous initialization is here
        [ MAINTENANCE_IN           ] = "MAINTENANCE_IN",
/src/qemu/hw/scsi-bus.c:985:40: warning: initializer overrides prior initialization of this subobject
        [ MAINTENANCE_OUT          ] = "MAINTENANCE_OUT",
/src/qemu/hw/scsi-bus.c:918:40: note: previous initialization is here
        [ MAINTENANCE_OUT          ] = "MAINTENANCE_OUT",
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Even though we do not use them, we should include the last three
bytes of sense data in the additional sense length.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 to distinguish
from the 12-byte CDB variant, and add a constant for the subcommand.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qemu_malloc/qemu_free no longer exist after this commit.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Other scsi_target_reqops commands were careful about not using r->cmd.xfer
directly, and instead always cap it to a fixed length.  This was not done
for REQUEST SENSE, and this patch fixes it.
Reported-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't use req before it has been initialised in scsi_req_new().
This fixes a compile failure due to gcc complaining about this.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Can be useful when debugging the device scan phase.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Unit attention conditions override any sense data the device already
has.  Their signaling and clearing is handled entirely by the SCSIBus
code, and they are completely transparent to the SCSIDevices.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Also introduce the first occurrence of "independent" SCSIReqOps,
to handle invalid commands in common code.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This will let SCSIBus detect requests sent to an invalid LUN, and
handle them itself.  However, there will be still support for only one
LUN per target
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This struct is currently unnamed.  Give it a name and use it
explicitly to decouple (some parts of) CDB parsing from
SCSIRequest.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Right now the CDB is not passed to the SCSIBus until scsi_req_enqueue.
Passing it to scsi_req_new will let scsi_req_new dispatch common requests
through different reqops.

Moving the memcpy to scsi_req_new is a hack that will go away as
soon as scsi_req_new will also take care of the parsing.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This will let allow requests to be dispatched through different callbacks,
either common or per-device.

This patch adjusts the API, the next one will move members to SCSIReqOps.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

With this patch, sense data is stored in the generic data structures
for SCSI devices and requests.  The SCSI layer takes care of storing
sense data in the SCSIDevice for the subsequent REQUEST SENSE command.

At the same time, get_sense is removed and scsi_req_get_sense can use
an entirely generic implementation.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A small improvement in the SCSI request API.  Pass the status
at the time the request is completed, so that we can assert that
no request is completed twice.  This would have detected the
problem fixed in the previous patch.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Sanitize SCSI command definitions.
Add _10 suffix to READ_CAPACITY, WRITE_VERIFY, VERIFY, READ_LONG,
WRITE_LONG, and WRITE_SAME.
Add new command definitions for LOCATE_10, UNMAP, VARLENGTH_CDB,
WRITE_FILEMARKS_16, EXTENDED_COPY, ATA_PASSTHROUGH, ACCESS_CONTROL_IN,
ACCESS_CONTROL_OUT, COMPARE_AND_WRITE, VERIFY_16, SYNCHRONIZE_CACHE_16,
LOCATE_16, ERASE_16, WRITE_LONG_16, LOAD_UNLOAD, VERIFY_12.
Remove invalid definition of WRITE_LONG_2.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

REZERO_UNIT command is obsolete. Remove support for it.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

SET_WINDOW command is vendor-specific only.
So we shouldn't try to emulate it.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

'tag' is just an abstraction to identify the command
from the driver. So we should make that explicit by
replacing 'tag' with a driver-defined pointer 'hba_private'.
This saves the lookup for driver handling several commands
in parallel.
'tag' is still being kept for tracing purposes.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The simple backend only supports a maximum of 6 arguments.  Split the
scsi_req_parsed event in two parts to cope with the limit.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>

The get_sense callback copies existing sense information into
the provided buffer. This is required if sense information
should be transferred together with the command response.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

... and remove some SCSIDevice variables or fields that now become unused.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>