- 22 6月, 2009 25 次提交
-
-
由 Mark McLoughlin 提交于
virtio-net needs this - for the same purpose that it currently uses the return value from qemu_sendv_packet(). Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
2.6.30 adds a new TUNSETSNDBUF ioctl() which allows a send buffer limit for the tap device to be specified. When this limit is reached, a tap write() will return EAGAIN and poll() will indicate the fd isn't writable. This allows people to tune their setups so as to avoid e.g. UDP packet loss when the sending application in the guest out-runs the NIC in the host. There is no obviously sensible default setting - a suitable value depends mostly on the capabilities of the physical NIC through which the packets are being sent. Also, note that when using a bridge with netfilter enabled, we currently never get EAGAIN because netfilter causes the packet to be immediately orphaned. Set /proc/sys/net/bridge/bridge nf-call-iptables to zero to disable this behaviour. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
net_tap_fd_init() already returns TAPState, so this is a sensible cleanup in its own right. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
If a write() on tapfd returns EAGAIN, return zero so that the packet gets queued (in the case of async send) and enable polling tapfd for writing. When tapfd becomes writable, disable write polling and flush any queued packets. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
Add a helper to enable/disable the read polling on tapfd. We need this, because we want to start write polling on the tapfd too and enable/disable both types of polling independently. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
If tap has any packets queued at host_net_remove time, it needs to purge them in order to prevent a sent callback being invoked for it. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
If net client sends packets asynchronously, it needs to purge its queued packets in cleanup() so as to prevent sent callbacks being invoked with a freed client. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gleb Natapov 提交于
APIC reset handler already resets cpu, no need to reset it twice. Also register cpu_reset handler directly to make it impossible to add additional code to main_cpu_reset() by mistake. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Make drive_init() accept addr=, put the value into struct DriveInfo. Use it in all the places that create virtio-blk-pci devices: pc_init1(), bamboo_init(), mpc8544ds_init(). Don't support addr= in third argument of monitor command pci_add and second argument of drive_add, because that clashes with their first arguments. Admittedly unelegant. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Simply pass the PCI address through qemu_pci_hot_add_nic() to pci_nic_init() and through qemu_pci_hot_add_storage() to pci_create(). Before, pci_device_hot_add() passed along the PCI bus to use, and ignored any user-specified slot. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
use NULL instead of 0 for pci_register_device() argument for consistency. Any other caller uses NULL. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
add qemu-monitor.texi to .gitignore. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
When virtio-net was merged in from qemu-kvm.git, the VNET_HDR related features were dropped from the code. However, VIRTIO_NET_F_MRG_RXBUF appears to have accidentally been dropped too. Re-instate that now. Reported-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
introruce piix4_device_hot_add() for piix4 specific code and make qemu_system_device_hot_add() generic. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Otherwise, after migration, we end up with a much larger RSS size then we ought to have. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gleb Natapov 提交于
This should fix compilation problem in case of CONFIG_USER_ONLY. Currently INIT/SIPI is handled in the context of CPU that sends IPI. This patch changes this to handle them like all other events in a main cpu exec loop. When KVM will gain thread per vcpu capability it will be much more clear to handle those event by cpu thread itself and not modify one cpu's state from the context of the other. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gleb Natapov 提交于
To reset internal irq handling data structures. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NYaniv Kamay <ykamay@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
Support a new feature flag for indirect ring entries. These are ring entries which point to a table of buffer descriptors. The idea here is to increase the ring capacity by allowing a larger effective ring size whereby the ring size dictates the number of requests that may be outstanding, rather than the size of those requests. This should be most effective in the case of block I/O where we can potentially benefit by concurrently dispatching a large number of large requests. Even in the simple case of single segment block requests, this results in a threefold increase in ring capacity. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
Change the vring descriptor helpers to take the physical address of the descriptor table rather than a virtqueue. This is needed in order to allow these helpers to be used with an indirect descriptor table. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Filip Navara 提交于
Fix the pcap dumps on Win32 and other systems where O_BINARY is required. Signed-off-by: NFilip Navara <filip.navara@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Glauber Costa 提交于
The code how it is today, is totally painful to read and keep. To begin with, the code is duplicated with the option rom loading code that linux_boot and vga are already using. This patch introduces a "bootable" state in NICInfo structure, that we can use to keep track of whether or not a given nic should be bootable, avoiding the introduction of yet another global state. With that in hands, we move the code in vl.c to hw/pc.c, and use the already existing infra structure to load those option roms. Error checking code suggested by Mark McLoughlin Signed-off-by: NGlauber Costa <glommer@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This eliminates the results unused warnings. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 20 6月, 2009 2 次提交
- 19 6月, 2009 3 次提交
-
-
由 Riku Voipio 提交于
On Tue, Jun 16, 2009 at 08:19:23PM -0500, Anthony Liguori wrote: > malc wrote: >> >> On my system the above line causes gcc to emit: >> >> In file included from /home/malc/x/rcs/git/qemu/linux-user/strace.c:12: >> /usr/include/linux/futex.h:48: error: field `__user' has incomplete type >> /usr/include/linux/futex.h:48: error: syntax error before '*' token >> /usr/include/linux/futex.h:63: error: field `list' has incomplete type >> /usr/include/linux/futex.h:83: error: field `__user' has incomplete type >> /usr/include/linux/futex.h:83: error: syntax error before '*' token >> make[1]: *** [strace.o] Error 1 > We had the same problem with usb-linux.c. It's broken system headers, > the __user stuff is supposed to get removed as part of the headers > installation. > It builds fine on my system (Fedora 10). Howabout something like this: commit eb8387cb0eda32a18880664eb5f0ca5c8bf05b45 Author: Riku Voipio <riku.voipio@iki.fi> Date: Thu Jun 18 22:44:31 2009 +0300 Subject: linux-user: include futex defines directly Since some common distributions have broken linux/futex.h, stop including it. Instead add the defines directly. Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
-
由 Jean-Christophe Dubois 提交于
Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 18 6月, 2009 7 次提交
-
-
由 Edgar E. Iglesias 提交于
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Also zero pci_irq_levels on reset to avoid stuck irq after reset. Based on 15a1956a by Gleb Natapov. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Gleb Natapov 提交于
Also zero pci_irq_levels on reset to avoid stuck irq after reset. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NYaniv Kamay <ykamay@redhat.com>
-
由 Gleb Natapov 提交于
The device is not reset on system reset currently. Without this patch RHEL4.8 hangs after reboot if -usbdevice table is in use. Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Blue Swirl 提交于
This reverts commit 3dcd219f. It is incorrect to call qemu_irq functions (or any other functions that access other device state) during savevm/loadvm. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 17 6月, 2009 3 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-