- 11 3月, 2013 1 次提交
-
-
由 Blue Swirl 提交于
08744c98 removed hw/baum.h but did not adjust hw/baum.c, breaking build. Fix. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com> Message-id: c50406bda98f8b277e8b9004a0012fa5e5c124d0.1362822910.git.blauwirbel@gmail.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 3月, 2013 20 次提交
-
-
由 Amit Shah 提交于
virtio-console.c used to return a value less than the number of bytes asked to be written out to a chardev backend in case the backend is not writable. virtio-serial-bus.c then implicitly enabled flow control for that port. Make this explicit instead. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: f5ec50b068c25422256e499cf4adc06d353bf394.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
The virtio-serial-bus already has the logic to make flow control work properly. Hook into the char layer's new ability to signal a backend is writable again. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: abffa02235d55ca6e2489068c58971c8897e976c.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 2976f10d4e66ed4a34011f6f0d6937026d22be5f.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 17cefde0a8d7807294bab95e93c3328a20d3f2ed.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: b47d1153b0d7669743c9a6bb98ce30f4cf7f876b.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 1b24baa1ec3a174d5cad31e079d829904b53077b.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 49a8d12eeb117e5530b2fab02af7681b54f9245c.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 0ff4f5f2b8b7afdb85a0c241403ad73f472f0b81.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
qemu-char is now independent of the QEMU main loop. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 3cda0bbcfb94912df8a767983a52bb71a4a3231d.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 05a883ce5a98275b976bf0124610599859c2b7da.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: b50e668c4f4146a654c5d4412440eb9e589f2c02.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This lets ptys support adding front end watchs. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 23380f37b22d407ba0b9e080f6ea0d66b279f2d2.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This allows a front-end to request for a callback when the backend is writable again. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 96f93c0f741064604bbb6389ce962191120af8b7.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
I didn't bother switching to g_io_channel_read/write because we need to use sendmsg on Unix. No problem though since we're using an unbuffered channel. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 002f726576dfb51bca4854aa257b74d77c1cd4e8.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 775a2bd666a3d1fa008656bf97191b7573c6ffb5.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 339eebf3c59a450b0354056e9ac4b41f67230831.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This uses the newly introduced IOWatchPoll source. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 0cb5d14510ee835a0ebc23676d10a2cce9280da5.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This is a special GSource that supports CharDriverState style poll callbacks. For reviewability and bisectability, this code is #if 0'd out in this patch to avoid unused warnings since all of the functions are static. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 9b59ac17b9d0bb3972a73fed04d415f07b391936.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This code is very old dating back to 2007. What is puzzling is that STDIO_MAX_CLIENTS was always #define to 1 meaning that all of the code to deal with more than one client was unreachable. Just remove the whole mess of it. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: d276bccdbf4e7463020c5f539f61ae3bfbc88d1d.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Right now the inet connect code tries all available addresses but until one doesn't fail. It passes local_err each time without clearing it from the previous failure. This can trigger an assert since the inet connect code tries to set an error on an object != NULL. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-id: 16c806d60aa5e9660ed7751bb4e37dcd278f97f0.1362505276.git.amit.shah@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 07 3月, 2013 1 次提交
-
-
由 Kuo-Jung Su 提交于
The BIT6 of Status Register(SR): SR[6] behaves the same as R/B# pin SR[6] = 0 indicates the device is busy; SR[6] = 1 means the device is ready Some NAND flash controller (i.e. ftnandc021) relies on the SR[6] to determine if the NAND flash erase/program is success or error timeout. P.S: The exmaple NAND flash datasheet could be found at following link: http://www.mxic.com.tw/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/8FEA549237D2F7674825795800104C26/$File/MX30LF1G08AA,%203V,%201Gb,%20v1.1.pdfSigned-off-by: NKuo-Jung Su <dantesu@gmail.com> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
- 05 3月, 2013 18 次提交
-
-
git://git.linaro.org/people/pmaydell/qemu-arm由 Aurelien Jarno 提交于
* 'target-arm.next' of git://git.linaro.org/people/pmaydell/qemu-arm: MAINTAINERS: add entry for ARM KVM guest cores configure: Enable KVM on ARM hw/kvm/arm_gic: Implement support for KVM in-kernel ARM GIC target-arm: Use MemoryListener to identify GIC base address for KVM hw/arm_gic: Convert ARM GIC classes to use init/realize hw/arm_gic: Add presave/postload hooks ARM KVM: save and load VFP registers from kernel ARM: KVM: Add support for KVM on ARM architecture target-arm: Drop CPUARMState* argument from bank_number() linux-headers: resync from mainline to add ARM KVM headers oslib-posix: Align to permit transparent hugepages on ARM Linux target-arm: Don't decode RFE or SRS on M profile cores target-arm: Factor out handling of SRS instruction
-
由 Richard Henderson 提交于
N32 is a 64-bit cpu with a 32-bit address space. We have existing cpp defines for this situation, but weren't using them. This does mean that the linux-user/mipsn32 directory must be merged with the linux-user/mips64 directory, and differences must be resolved via ifdefs. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
At this point we can enable compilation, though things still don't work. Signed-off-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Deleting these first makes the next patch much easier to read. This doesn't cause any sort of compilation failure because we have not yet enabled n32/n64 compilation. This is dead code. Signed-off-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Add an entry indicating maintainer status for the ARM KVM code. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Enable KVM on ARM hosts, now that all the necessary components for it exist. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Maydell 提交于
Implement support for using the KVM in-kernel GIC for ARM. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAndreas Färber <afaerber@suse.de>
-
由 Peter Maydell 提交于
When using an in-kernel GIC with KVM, we need to tell the kernel where the GIC's memory mapped registers live. Do this by registering a MemoryListener which tracks where the board model maps the A15's private peripherals, so we can finish the GIC initialisation when the GIC is actually mapped. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Maydell 提交于
Convert the ARM GIC classes to use init/realize rather than SysBusDevice::init. (We have to do them all in one patch to avoid unconverted subclasses calling a nonexistent SysBusDevice init function in the base class and crashing.) Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAndreas Färber <afaerber@suse.de>
-
由 Peter Maydell 提交于
Add presave/postload hooks to the ARM GIC common base class. These will be used by the KVM in-kernel GIC subclass to sync state between kernel and userspace when migrating. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAndreas Färber <afaerber@suse.de> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Maydell 提交于
Add support for saving and restoring VFP register state from the kernel. This includes a check that the KVM-created CPU has full VFP support (as the TCG Cortex-A15 model always does), since for the moment ARM QEMU doesn't have any way to tweak optional features on created CPUs. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Christoffer Dall 提交于
Add basic support for KVM on ARM architecture. Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu> [PMM: Minor tweaks and code cleanup, switch to ONE_REG] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Maydell 提交于
Drop the CPUARMState* argument from bank_number(), since we only use it for passing to cpu_abort(). Use hw_error() instead. This avoids propagating further interfaces using env pointers. In the long term this function's callers need auditing to fix problems where badly behaved guests can pass invalid bank numbers. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAndreas Färber <afaerber@suse.de>
-
由 Peter Maydell 提交于
Resync QEMU's copy of the Linux kernel headers from git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master commit 2ef14f4. This adds the ARM KVM headers, since ARM KVM support has just hit mainline via Russell's ARM tree. This is not a pure sync -- I have removed by hand some changes that would have reverted updates for s390x and ppc which have not yet hit mainline. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-