Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This naming was used in kvm tree, and is easier to remember
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

vmsd alone is not enugh, because we can have several structs saved with the same description (vmsd).
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

ticks_per_sec is a constant.  There's no need to store it as a variable as it
never changes since our time is based on units.

Convert get_ticks_per_sec() to a static inline and move the constant into
qemu-timer.h.  Remove all references to QEMU_TIMER_BASE so that we consistently
use this interface.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

loadvm_state is called from: vl.c during startup, vmstart() is called after finishing loading.  The other caller do_loadvm() does the call after a vm_stop().  At both places where we can be saving state we are stoped a few lines before
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In previosu series I remove v2 support for RAM (that was the version that was
supported when SaveVM v3 appeared).  Now we can't load RAM for any image saved in SaveVM v2, we can as well remove SaveVM v2 entirely.

Note: That SaveVM RAM was at v2 when General SaveVM support went from v2 to v3 makes talking about versions confusing at least
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It don't work.  It fails in this check

        if (qemu_get_be32(f) != last_ram_offset)

With 512MB of ram, values were for me:

	v = 20c00000 last_ram_offset = 20840000

Last time that some code changed that was this one.

    commit 94a6b54f
    Implement dynamic guest ram allocation.
    (I.e. it has been broken since at least April)

Going back to the previous commit, ram load correctly, but vga screen gets
corrupted and ide don't load correctly.  At this point I decide that removing
support is the only viable thing.

The last user of the ram_compress_* were RAM_SAVE_FLAG_FULL flag, but
that flag was never ever been stored in an image. Mark the flag obsolete
and remove the functions.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that monitor stopped using focus we can make it internal
to the mux driver.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

make the mux driver send mux_in and mux_out events when switching
focus while hooking up more handlers.

stop using CharDriverState->focus in monitor.c, track state using
the mux events instead.  This also removes the implicit assumtion
that a muxed monitor allways has mux channel 0.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Lets put -chardev into use now.  With this patch applied chardev:name is
accepted as chardev specification everywhere, i.e. now you can:

	-chardev stdio,id=ttyS0
	-serial chardev:ttyS0

which does the same as '-serial stdio".

Muxing can be done this way:

	-chardev stdio,id=mux,mux=on
	-serial chardev:mux
	-monitor chardev:mux

You can mux more than two streams.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While being at it: create a new inet_dgram_opts() function for udp setup,
so udp can handle IPv6 now.

new cmd line syntax:
    -chardev udp,id=name,host=remotehost,port=remoteport,\
	localaddr=bindaddr,localport=bindport
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

new cmd line syntax:  you can add mux=1 to any chardev to enable muxing,
then attach it multiple times, like this:

	-chardev pty,name=mux,mux=on
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

new cmd line syntax:
    -chardev vc,id=name
    -chardev vc,id=name,width=pixels,height=pixels
    -chardev vc,id=name,cols=chars,rows=chars
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

new cmd line syntax:
    -chardev tty,id=name,path=/dev/tty*
    -chardev parport,id=name,path=/dev/parport*
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

new cmd line syntax:
  unix socket:
    -chardev socket,id=name,path=/path/to/socket
  tcp socket:
    -chardev socket,id=name,host=hostaddr|ipaddr,port=portnr

server and nowait options work as usual.  Alternatively you can use
server=[on|off] + wait=[on|off] syntax.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add inet_listen_opts().  Does the same as inet_listen(), but uses
QemuOpts.  inet_listen() is a compatibility wrapper for
inet_listen_opts() now and should go away some day.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add inet_connect_opts().  Does the same as inet_connect(), but uses
QemuOpts.  inet_connect() is a compatibility wrapper for
inet_connect_opts() now and should go away some day.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add unix_*_opts function dummys for windows.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add unix_listen_opts().  Does the same as unix_listen(), but uses
QemuOpts.  unix_listen() is a compatibility wrapper for
unix_listen_opts() now and should go away some day.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add unix_connect_opts().  Does the same as unix_connect(), but uses
QemuOpts.  unix_connect() is a compatibility wrapper for
unix_connect_opts() now and should go away some day.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

new cmd line syntax:
    -chardev file,id=name,path=/path/to/file
    -chardev pipe,id=name,path=/path/to/pipe
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

start switching chardevs to QemuOpts.  This patch adds the
infrastructure and converts the null device.

The patch brings two new functions:

qemu_chr_open_opts()
	same as qemu_chr_open(), but uses QemuOpts instead of a
	option char string.

qemu_chr_parse_compat()
	accepts a traditional chardev option string, returns the
	corresponding QemuOpts instance, to handle backward
	compatibility.

The patch also adds a new -chardev switch which can be used to create
named+unconnected chardevs, like this:

	-chardev null,id=test

This uses the new qemu_chr_open_opts.  Thus with this patch alone only
the null device works.  The other devices will follow ...
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

qemu-option.h has no protection against including it twice.
This patch adds the usual "#ifndef header" bits.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

looking for id= and creating a new QemuOpts instance is splitted from
the actual option parser code now, so the parser can be called from
other contexts too.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use DO_UPCAST() instead of container_of() to go from PCIDevice to
I6300State.  This ensures that PCIDevice is the first member of struct
I6300State.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Hello,

In some cases bus driver can deassert "bus master" bit in PCI command
register. The driver will no longer be able to update related registers in
the device. Eventually it will cause QEMU to exit in "virtqueue_num_heads"
function.

Attached path that fixes the described issue.

Best regards,
Yan Vugenfirer.

>From 3fdafbdfad676ec8479dc073cff70bf356868bfe Mon Sep 17 00:00:00 2001
From: Yan Vugenfirer <yvugenfi@redhat.com>
Date: Tue, 8 Sep 2009 10:08:14 -0400
Subject: [PATCH] VirtIO: Fix QEMU crash during Windows PNP tests
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>