Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>

Coverity (CID 1355236) points out that get_image_offset() doesn't check that
it actually succeeded in writing the updated block bitmap to the file.
Check the error return from bdrv_pwrite_sync() and propagate an error
response back up to the function which calls get_image_offset() for
a write so that it can return the error to its caller.

get_sector_offset() is only used for reads, but we move it to the
same API for consistency.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The function vmdk_read_cid() can fail if the read on the underlying
block device fails, or if there's a format error in the VMDK file.
However its API doesn't provide a mechanism to report these errors,
and in some cases we were returning a CID of 0 and in some cases a
CID of 0xffffffff, either of which might potentially be valid values.

Change the function to return 0 on success or a negative errno, and
return the CID via a uint32_t* argument. Update the callsites to
handle and propagate the error appropriately.

This fixes in passing a Coverity-spotted issue (CID 1350038) where
we weren't checking the return value from sscanf().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

throttle_config() cancels the timers of the calling BlockBackend. This
doesn't make sense because other BlockBackends in the group remain
untouched. There's no need to cancel the timers in the one specific
BlockBackend so let's not do that. Throttled requests will run as
scheduled and future requests will follow the new configuration. This
also allows a throttle group's configuration to be changed even when it
has no members.
Signed-off-by: NManos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Clock type in throttling is currently inferred by the ThrottleTimer's
clock type even though it is a per-ThrottleGroup property; it doesn't
make sense to have different clock types in the same group. Moving this
to a field in ThrottleGroup can simplify some of the throttle functions.
Signed-off-by: NManos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

I can't see how overlay_bs could become NULL with the current code, but
other code in this function already checks it and we can make Coverity
happy with this check, so let's add it.

Cc: qemu-stable@nongnu.org
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

# gpg: Signature made Mon 17 Jul 2017 16:40:18 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  block: fix shadowed variable in bdrv_co_pdiscard
  util/aio-win32: Only select on what we are actually waiting for
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Queued target/mips patches

# gpg: Signature made Mon 17 Jul 2017 15:50:27 BST
# gpg:                using RSA key 0xBA9C78061DDD8C9B
# gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>"
# gpg:                 aka "Aurelien Jarno <aurelien@jarno.fr>"
# gpg:                 aka "Aurelien Jarno <aurel32@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7746 2642 A9EF 94FD 0F77  196D BA9C 7806 1DDD 8C9B

* remotes/aurel/tags/pull-target-mips-20170717:
  target/mips: optimize WSBH, DSBH and DSHD
  mips: set CP0 Debug DExcCode for SDBBP instruction
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * new model of the ARM MPS2/MPS2+ FPGA based development board
 * clean up DISAS_* exit conditions and fix various regressions
   since commits e75449a3 8a6b28c7 (in particular including
   ones which broke OP-TEE guests)
 * make Cortex-M3 and M4 correctly default to 8 PMSA regions

# gpg: Signature made Mon 17 Jul 2017 13:43:45 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20170717:
  MAINTAINERS: Add entries for MPS2 board
  hw/arm/mps2: Add ethernet
  hw/arm/mps2: Add SCC
  hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller
  hw/arm/mps2: Add timers
  hw/char/cmsdk-apb-timer: Implement CMSDK APB timer device
  hw/arm/mps2: Add UARTs
  hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UART
  hw/arm/mps2: Implement skeleton mps2-an385 and mps2-an511 board models
  target/arm: use DISAS_EXIT for eret handling
  target/arm: use gen_goto_tb for ISB handling
  target/arm/translate: ensure gen_goto_tb sets exit flags
  target/arm/translate.h: expand comment on DISAS_EXIT
  target/arm/translate: make DISAS_UPDATE match declared semantics
  include/exec/exec-all: document common exit conditions
  target/arm: Make Cortex-M3 and M4 default to 8 PMSA regions
  qdev: support properties which don't set a default value
  qdev-properties.h: Explicitly set the default value for arraylen properties
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Mon 17 Jul 2017 13:17:17 BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  virtio-net: fix offload ctrl endian
  virtion-net: Prefer is_power_of_2()
  docs/colo-proxy.txt: Update colo-proxy usage of net driver with vnet_header
  net/filter-rewriter.c: Make filter-rewriter support vnet_hdr_len
  net/colo-compare.c: Add vnet packet's tcp/udp/icmp compare
  net/colo.c: Add vnet packet parse feature in colo-proxy
  net/colo-compare.c: Make colo-compare support vnet_hdr_len
  net/colo-compare.c: Introduce parameter for compare_chr_send()
  net/colo.c: Make vnet_hdr_len as packet property
  net/filter-mirror.c: Add new option to enable vnet support for filter-redirector
  net/filter-mirror.c: Make filter mirror support vnet support.
  net/filter-mirror.c: Introduce parameter for filter_send()
  net/net.c: Add vnet_hdr support in SocketReadState
  net: Add vnet_hdr_len arguments in NetClientState
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Mon 17 Jul 2017 13:11:17 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace: update old trace events in docs
  trace: [trivial] Statically enable all guest events
  trace: [tcg, trivial] Re-align generated code
  trace: [tcg] Do not generate TCG code to trace dynamically-disabled events
  exec: [tcg] Use different TBs according to the vCPU's dynamic tracing state
  trace: [tcg] Delay changes to dynamic state when translating
  trace: Allocate cpu->trace_dstate in place
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ehci fix for 2.10

# gpg: Signature made Mon 17 Jul 2017 10:40:00 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20170717-pull-request:
  ehci: add sanity check for maxframes
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio-gpu migration fix for 2.10

# gpg: Signature made Mon 17 Jul 2017 10:41:49 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20170717-pull-request:
  virtio-gpu: skip update cursor in post_load if we don't have one
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ui: vnc and keymap updates for 2.10

# gpg: Signature made Mon 17 Jul 2017 10:38:11 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20170717-pull-request:
  keymaps: fr-ca: add missing keys
  hmp: Update info vnc
  vnc: Set default kbd delay to 10ms
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We've had a shadowed 'ret' variable, which risks returning the wrong
value, introduced in commit b9c64947.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 20170710150559.30163-1-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 9307b70e9876c4e9e3c4478524a32a23a3d5dd05.1499368180.git.alistair.francis@xilinx.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use the same mask to avoid having to load two different constants.
Suggested-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch fixes setting DExcCode field of CP0 Debug register
when SDBBP instruction is executed. According to EJTAG specification,
this field must be set to the value 9 (Bp).
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170502120350.3368.92338.stgit@PASHA-ISP
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

audio: fixes for 2.10

# gpg: Signature made Mon 17 Jul 2017 10:29:08 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20170717-pull-request:
  audio/adlib: remove limitation of one adlib card
  audio/fmopl: modify timer callback to give opaque and channel parameters in two arguments
  audio: st_rate_flow exist a infinite loop
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Pull request

# gpg: Signature made Mon 17 Jul 2017 10:04:11 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ipxe-pull-request:
  ipxe: update to commit 0600d3ae94
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Quite a while has passed since we last updated U-Boot for e500. This patch
bumps it to the last released version 2017.07 to make sure users don't feel
like they're using out of date software.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Tested-by: NThomas Huth <thuth@redhat.com>
Message-id: 1499862868-102130-1-git-send-email-agraf@suse.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add entries to the MAINTAINERS file for the new MPS2
board and devices.

Since the CMSDK devices are not specific to the MPS2 board,
extend the existing 'PrimeCell' section to cover CMSDK
devices as well; in both cases these are devices implemented
by ARM and provided as RTL that may be used in multiple
SoCs and boards.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-10-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>

The MPS2 FPGA images support ethernet via a LAN9220. We use
QEMU's LAN9118 model, which is software compatible except
that it is missing the checksum-offload feature.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-9-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>

Add the SCC to the MPS2 board models.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-8-git-send-email-peter.maydell@linaro.org

Implement a model of the Serial Communication Controller (SCC) found
in MPS2 FPGA images.

The primary purpose of this device is to communicate with the
Motherboard Configuration Controller (MCC) which is located on
the MPS board itself, outside the FPGA image. This is used
for programming the MPS clock generators. The SCC also has
some basic ID registers and an output for the board LEDs.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org

Add the CMSDK APB timers to the MPS2 board.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-6-git-send-email-peter.maydell@linaro.org

Implement a model of the simple timer device found in the CMSDK.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-5-git-send-email-peter.maydell@linaro.org

Add the UARTs to the MPS2 board models.

Unfortunately the details of the wiring of the interrupts through
various OR gates differ between AN511 and AN385 so this can't
be purely a data-driven difference.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1500029487-14822-4-git-send-email-peter.maydell@linaro.org

Implement a model of the simple "APB UART" provided in
the Cortex-M System Design Kit (CMSDK).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Model the ARM MPS2/MPS2+ FPGA based development board.

The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger
FPGA but is otherwise the same as the 2). Since the CPU itself
and most of the devices are in the FPGA, the details of the board
as seen by the guest depend significantly on the FPGA image.

We model the following FPGA images:
 "mps2_an385" -- Cortex-M3 as documented in ARM Application Note AN385
 "mps2_an511" -- Cortex-M3 'DesignStart' as documented in AN511

They are fairly similar but differ in the details for some
peripherals.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>

Previously DISAS_JUMP did ensure this but with the optimisation of
8a6b28c7 (optimize indirect branches) we might not leave the loop.
This means if any pending interrupts are cleared by changing IRQ flags
we might never get around to servicing them. You usually notice this
by seeing the lookup_tb_ptr() helper gainfully chaining TBs together
while cpu->interrupt_request remains high and the exit_request has not
been set.

This breaks amongst other things the OPTEE test suite which executes
an eret from the secure world after a non-secure world IRQ has gone
pending which then never gets serviced.

Instead of using the previously implied semantics of DISAS_JUMP we use
DISAS_EXIT which will always exit the run-loop.

CC: Etienne Carriere <etienne.carriere@linaro.org>
CC: Joakim Bech <joakim.bech@linaro.org>
CC: Jaroslaw Pelczar <j.pelczar@samsung.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Emilio G. Cota <cota@braap.org>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-7-alex.bennee@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

While an ISB will ensure any raised IRQs happen on the next
instruction it doesn't cause any to get raised by itself. We can
therefore use a simple tb exit for ISB instructions and rely on the
exit_request check at the top of each TB to deal with exiting if
needed.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-6-alex.bennee@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As the gen_goto_tb function can do both static and dynamic jumps it
should also set the is_jmp field. This matches the behaviour of the
a64 code.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-5-alex.bennee@linaro.org
[tweak to multiline comment formatting]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We already have an exit condition, DISAS_UPDATE which will exit the
run-loop. Expand on the difference with DISAS_EXIT in the comments.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-4-alex.bennee@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

DISAS_UPDATE should be used when the wider CPU state other than just
the PC has been updated and we should therefore exit the TCG runtime
and return to the main execution loop rather assuming DISAS_JUMP would
do that.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-3-alex.bennee@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As a precursor to later patches attempt to come up with a more
concrete wording for what each of the common exit cases would be.

CC: Emilio G. Cota <cota@braap.org>
CC: Richard Henderson <rth@twiddle.net>
CC: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-2-alex.bennee@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Cortex-M3 and M4 CPUs always have 8 PMSA MPU regions (this isn't
a configurable option for the hardware).  Make the default value of
the pmsav7-dregion property be set per-cpu, so we don't need to have
every user of these CPUs set it manually.  (The existing default of
16 is correct for the other PMSAv7 core, the Cortex-R5.)

This fixes a bug where we were creating the M3 and M4 with
too many regions; most guest software would not notice or
care, though, since it would just not use the registers
associated with the unexpected extra regions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1499788408-10096-4-git-send-email-peter.maydell@linaro.org

In some situations it's useful to have a qdev property which doesn't
automatically set its default value when qdev_property_add_static is
called (for instance when the default value is not constant).

Support this by adding a flag to the Property struct indicating
whether to set the default value.  This replaces the existing test
for whether the PropertyInfo set_default_value function pointer is
NULL, and we set the .set_default field to true for all those cases
of struct Property which use a PropertyInfo with a non-NULL
set_default_value, so behaviour remains the same as before.

This gives us the semantics of:
 * if .set_default is true, then .info->set_default_value must
   be not NULL, and .defval is used as the the default value of
   the property
 * otherwise, the property system does not set any default, and
   the field will retain whatever initial value it was given by
   the device's .instance_init method

We define two new macros DEFINE_PROP_SIGNED_NODEFAULT and
DEFINE_PROP_UNSIGNED_NODEFAULT, to cover the most plausible use cases
of wanting to set an integer property with no default value.
Suggested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1499788408-10096-3-git-send-email-peter.maydell@linaro.org

In DEFINE_PROP_ARRAY, because we use a PropertyInfo (qdev_prop_arraylen)
which has a .set_default_value member we will set the field to a default
value. That default value will be zero, by the C rule that struct
initialization sets unmentioned members to zero if at least one member
is initialized. However it's clearer to state it explicitly.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1499788408-10096-2-git-send-email-peter.maydell@linaro.org

Spec said offloads should be le64, so use virtio_ldq_p() to guarantee
valid endian.

Fixes: 644c9858 ("virtio-net: dynamic network offloads configuration")
Cc: qemu-stable@nongnu.org
Cc: Dmitry Fleytman <dfleytma@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>