Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5800 c046a42c-6fe2-441c-8c8c-71466251a162

This switches cpu_break/watchpoint_* to TAILQ wrappers, simplifying the
code and also fixing a use after release issue in
cpu_break/watchpoint_remove_all.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5799 c046a42c-6fe2-441c-8c8c-71466251a162

Add TAILQ iterator that allows to safely remove elements while walking
the list.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5798 c046a42c-6fe2-441c-8c8c-71466251a162

Virtio will want to use the geometry detection code.  It doesn't belong 
in ide.c anyway.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5797 c046a42c-6fe2-441c-8c8c-71466251a162

Changeset r5636 changed the timers to run in the alarm callback.  The 
alarm callback can only be called as frequently as the host alarm timer 
fires.  For older Linux hosts and possibly non-Linux hosts, this can be 
as high as a 1ms granularity.

icount calculates the select timeout based on the next deadline and 
select is usually capable of sleeping for a short period of time than 
alarm timer granularity.  This means that changing the timer callbacks 
to be based on alarm firing caused timers to fire much later than they 
ought to when using icount.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5796 c046a42c-6fe2-441c-8c8c-71466251a162

This patch removes two unused prototypes from i386 target exec.h file.
Signed-off-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5795 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5794 c046a42c-6fe2-441c-8c8c-71466251a162

Hypervisors like KVM perform badly while doing mmio on
a loop, because it'll generate an exit on each access.
This is the case with VGA, which results in very bad
performance.

In this patch, we map the linear frame buffer as RAM,
make sure it has dirty region tracking enabled, and then
just let the region to be written.

Cleanups suggestions by:
  Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5793 c046a42c-6fe2-441c-8c8c-71466251a162

Introduce functions to control logging of memory regions.
We select regions based on its start address, a
guest_physical_addr (target_phys_addr_t, in qemu nomenclature).

The main user of this interface right now is VGA optimization
(a way of reducing the number of mmio exits).
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5792 c046a42c-6fe2-441c-8c8c-71466251a162

It'll be reused later by the vga optimization.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5791 c046a42c-6fe2-441c-8c8c-71466251a162

unsigned long is too bad of a type. Use ram_addr_t instead.

aligurori: fixed a compile warning in this patch
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5790 c046a42c-6fe2-441c-8c8c-71466251a162

Introducing some accessors:

ds_get_linesize
ds_get_bits_per_pixel
ds_get_width
ds_get_height
ds_get_data
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5789 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5788 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5787 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5786 c046a42c-6fe2-441c-8c8c-71466251a162

Write env->access_type before a load/store operation instead of relying
on the name of the dyngen operation.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5785 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5784 c046a42c-6fe2-441c-8c8c-71466251a162

Including a few bug fixes:
- Don't clear high part for instruction with 32-bit destination
- Fix efscmp* and etstcmp* return value
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5783 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5782 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5781 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5780 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5779 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5778 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5777 c046a42c-6fe2-441c-8c8c-71466251a162

- adapt configure to link against -lrt to fix aio linking errors
- adapt configure to link against -lossaudio to fix oss linking errors
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5776 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5775 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5774 c046a42c-6fe2-441c-8c8c-71466251a162

When loading/storing a register pair, the even-numbered register
always maps to the low 32 bits of memory independently of target
endian configuration.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5773 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5772 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5771 c046a42c-6fe2-441c-8c8c-71466251a162

Based on a patch from Vladimir Prus and comments from Shin-ichiro KAWASAKI.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5770 c046a42c-6fe2-441c-8c8c-71466251a162

This patches makes SH serial emulation use qemu_irq in its interface.

        * hw/sh.h (sh_serial_init): Take qemu_irq, not intc_source.
        * hw/sh7750.c (sh7750_init): Adjust.
        * hw/sh_intc.c (sh_intc_set_irq): Don't assert or deassert
        irq more than once.
        * hw/sh_serial.c (sh_serial_state): Use qemu_irq, not intc_source.
        (sh_serial_clear_fifo, sh_serial_ioport_write)
        (sh_serial_receive_byte): Adjust.
        (sh_serial_init): Take qemu_irq, not intc_source.

(Vladimir Prus)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5769 c046a42c-6fe2-441c-8c8c-71466251a162

        * hw/sh.h (tmu012_init): Accept qemu_irq, not intc_source.
        * hw/sh7750.c (sh7750_init): Pass qemu_irq to tmu012_init.
        * hw/sh_intc.c (sh_intc_set_irq): New.
        (sh_intc_init): Allocate irqs.
        * hw/sh_intc.h (struct intc_desc): New field irqs.
        * hw/sh_timer.c (sh_timer_state): Use qemu_irq, not intc_source.
        (sh_timer_update): Use qemu_set_irq, not sh_intc_toggle_source.
        (sh_timer_init, tmu012_init): Adjust.

(Vladimir Prus)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5768 c046a42c-6fe2-441c-8c8c-71466251a162

Remove unused file, reported by Laurent Desnogues.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5767 c046a42c-6fe2-441c-8c8c-71466251a162

We're currently ignoring the e1000 VLAN tagging, stripping and filtering
features in the e1000 emulation.  This patch adds backing for the
relevant registers and provides a software implementation of the
acceleration, such that a guest can make use of VLANs.

This is mostly (only?) useful for a guest on a bridge (not user mode
networking).  The only caveat beyond that is that you need to make sure
the host NIC isn't doing it's own tagging, stripping, or filtering.
This generally means the host NIC on the bridge should not be part of a
VLAN.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5766 c046a42c-6fe2-441c-8c8c-71466251a162

Loading other image types (e.g. IH_TYPE_MULTI, IH_TYPE_FLATDT) is not
implemented.

IH_TYPE_STANDALONE images could be loaded, but would unexpectedly fail if they
tried to use any uboot services.
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5765 c046a42c-6fe2-441c-8c8c-71466251a162

u-boot is a firmware. uImage is an executable file format.
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5764 c046a42c-6fe2-441c-8c8c-71466251a162

Return the base address at which the image was loaded so that callers may keep
track of currently occupied guest memory.

This will be required by the PPC 440 embedded code to avoid hard coding a
device model/initrd location.  Other users of this function could make use of
this parameter to avoid hard coding these locations in the future too.
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5763 c046a42c-6fe2-441c-8c8c-71466251a162

Based on gzip uImage loading code from u-boot.
Signed-off-by: NJerone Young <jyoung5@us.ibm.com>
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5762 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5761 c046a42c-6fe2-441c-8c8c-71466251a162