- 05 12月, 2013 5 次提交
-
-
由 Peter Lieven 提交于
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Lieven 提交于
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Lieven 提交于
this patch aims to set bdi->cluster_size to the internal page size of the iscsi target so that enabled callers can align requests properly. Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Lieven 提交于
Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Lieven 提交于
we currently do not check if a sector is allocated during convert. This means if a sector is unallocated that we allocate a bounce buffer of zeroes, find out its zero later and do not write it in the best case. In the worst case this can lead to reading blocks from a raw device (like iSCSI) altough we could easily know via get_block_status that they are zero and simply skip them. This patch also fixes the progress output not being at 100% after a successful conversion. Signed-off-by: NPeter Lieven <pl@kamp.de> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 04 12月, 2013 14 次提交
-
-
由 Wenchao Xia 提交于
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Wenchao Xia 提交于
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Wenchao Xia 提交于
Now qemu-img convert have similar options as qemu-nbd for internal snapshot. Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Wenchao Xia 提交于
This case can't run when IMGPROTO=nbd, since it needs to create some internal snapshot which would fail for EOF write request, even when TEST_IMG is exported with "-f raw" in common.rc, so set _supported_proto to file. _require_command() is changed to tip what util is missing, instead of printing a blank. Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Wenchao Xia 提交于
Now it is possible to directly export an internal snapshot, which can be used to probe the snapshot's contents without qemu-img convert. Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Wenchao Xia 提交于
Since later this function will be used so improve it. The only caller of it now is qemu-img, and it is not impacted by introduce function bdrv_snapshot_load_tmp_by_id_or_name() that call bdrv_snapshot_load_tmp() twice to keep old search logic. bdrv_snapshot_load_tmp_by_id_or_name() return int to let caller know the errno, and errno will be used later. Also fix a typo in comments of bdrv_snapshot_delete(). Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
Format "raw" doesn't always work on certain file systems (e.g. tmpfs). Use qcow2 to make the allocation status explicit and split into a new case. [Resolved merge conflict due to "qemu-io> " prompt filter, added 074 to group file, and fixed up s/048/074/ copy-paste mistake. --Stefan] Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
Whitespace changes to align columns. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NBenoit Canet <benoit@irqsave.net> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
So that the tests can run faster. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
This replaces _unsupported_qemu_io_options and check for support of current cache mode, and allow to provide a default if user didn't specify. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
This will allow overriding cache mode from the "-c mode" option. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
The option sets cache mode used in the tests. "-nocache" is changed to an alias to "-c none", and internally passes "-t none" to qemu-io. Python scripts will make use of option this in the next commit. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
Strictly speaking, this is only required for has_zero_init() == false, but it's easy enough to just do a cluster-aligned write that is padded with zeros after the header. This fixes that after 'qemu-img create' header extensions are attempted to be parsed that are really just random leftover data. Cc: qemu-stable@nongnu.org Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Max Reitz 提交于
Leaving the backing file open although it is not needed anymore can cause problems if it is opened through a block driver which allows exclusive access only and if the create function of the block driver used for the top image (the one being created) tries to close and reopen the image file (which will include opening the backing file a second time). In particular, this will happen with a backing file opened through qemu-nbd and using qcow2 as the top image file format (which reopens the image to flush it to disk). In addition, the BlockDriverState in bdrv_img_create() is used for the backing file only; it should therefore be made local to the respective block. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 03 12月, 2013 21 次提交
-
-
由 Paolo Bonzini 提交于
Fetch the data to be written from the input buffer. If it is all zeroes, we can use the write_zeroes call (possibly with the new MAY_UNMAP flag). Otherwise, do as many write cycles as needed, writing 512k at a time. Strictly speaking, this is still incorrect because a zero cluster should only be written if the MAY_UNMAP flag is set. But this is a bug in qcow2 and the other formats, not in the SCSI code. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Since we report ANC_SUP==0 in VPD page B2h, we need to return an error (ILLEGAL REQUEST/INVALID FIELD IN CDB) for all WRITE SAME requests with ANCHOR==1. Inspired by a similar patch to the LIO in-kernel target. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
This is the same that is already done for WRITE SAME. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
The code is similar to the implementation of discard and write_zeroes with UNMAP. However, failure must be propagated up to block.c. The stale page cache problem can be reproduced as follows: # modprobe scsi-debug lbpws=1 lbprz=1 # ./qemu-io /dev/sdXX qemu-io> write -P 0xcc 0 2M qemu-io> write -z 0 1M qemu-io> read -P 0x00 0 512 Pattern verification failed at offset 0, 512 bytes qemu-io> read -v 0 512 00000000: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ ... # ./qemu-io --cache=none /dev/sdXX qemu-io> write -P 0xcc 0 2M qemu-io> write -z 0 1M qemu-io> read -P 0x00 0 512 qemu-io> read -v 0 512 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ... And similarly with discard instead of "write -z". Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
See the next commit for the description of the Linux kernel problem that is worked around in raw_open_common. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Writing zeroes to a file can be done by punching a hole if MAY_UNMAP is set. Note that in this case ENOTSUP is not ignored, but makes the block layer fall back to the generic implementation. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
The current check is right for MAY_UNMAP=1. For MAY_UNMAP=0, just try and fall back to regular writes as soon as a WRITE SAME command fails. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Lieven 提交于
added myself to reflect recent work on the iscsi block driver. Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Lieven 提交于
since commit 3ac21627 the default value changed to 0. Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
This will let misaligned but large requests use zero clusters. This is important because the cluster size is not guest visible. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Right now, bdrv_co_do_write_zeroes will only try to align the beginning of the request. However, it is simpler for many formats to expect the block layer to separate both the head *and* the tail. This makes sure that the format's bdrv_co_write_zeroes function will be called with aligned sector_num and nb_sectors for the bulk of the request. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Similar to write_zeroes, let the generic code receive a ENOTSUP for discard operations. Since bdrv_discard has advisory semantics, we can just swallow the error. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
This will be used by the SCSI layer. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
This lets bdrv_co_do_rw receive flags, so that it can be used for zero writes. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
bdrv_co_discard is only covering drivers which have a .bdrv_co_discard() implementation, but not those with .bdrv_aio_discard(). Not very nice, and easy to avoid. Suggested-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
The buffer for description file was 4096 which only covers a few hundred of extents. This changes the buffer to dynamic allocated with g_strdup_printf in order to support bigger cases. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Marc-André Lureau 提交于
The AioContext ctx field is apparently unused in qemu codebase since 02ffb504. Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-