- use symbolic constant
- use helper function pci_set_xxx()
- removed lines which initializes to 0.
  It is unnecessary because it is already zeroed.
- add some comments on command registers.

Some initial values are suspicious because they seems to
be specific to apb_pci.c which is the only user of pci bridge right now.
For now don't touch those values to avoid breakage.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

use pci_[gs]et_{byte, word, long}() to access pci configuration
space.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

add helper functions to get/set PCIDevice::config
Those will be used later.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

define a constant to represent a unmapped bar instead of -1 and use it.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

use PCI_SLOT() and PCI_FUNC() where appropriate instead of
direct use of bit operation.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

introduce constant PCI_NUM_PINS for the number of interrupt pins, 4.
and use it.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

add missing ## in PCI_DPRINTF() to compile.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch is a followup to 8eca6b1b,
fixing crashes when guests with 2.6.25 virtio drivers have saturated
virtio network connections.

https://bugs.edge.launchpad.net/ubuntu/+source/qemu-kvm/+bug/458521

That patch should have been whitelisting *_HOST_* rather than the the
*_GUEST_* features.

I tested this by running an Ubuntu 8.04 Hardy guest (2.6.24 kernel +
2.6.25-virtio driver).  I saturated both the incoming, and outgoing
network connection with nc, seeing sustained 6MB/s up and 6MB/s down
bitrates for ~20 minutes.  Previously, this crashed immediately.  Now,
the guest does not crash and maintains network connectivity throughout
the test.
Signed-off-by: NDustin Kirkland <kirkland@canonical.com>
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We should only return zero from receive() for a condition which we'll
get notification of when it changes. Currently, we're returning zero
if the guest driver is not ready, but we won't ever flush our queue
when that status changes.

Also, don't check buffer space in can_receive(), but instead just allow
receive() to return zero when this condition occurs and have the caller
handle queueing the packet.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We have code for a quite a few block formats.  While I trust that all
of these formats are useful at least for some people in some
circumstances, some of them are of a kind that friends don't let
friends use in production.

This patch provides an optional block format whitelist, default off.
If a whitelist is configured with --block-drv-whitelist, QEMU proper
can use only whitelisted formats.  Other programs, like qemu-img, are
not affected.

Drivers for formats off the whitelist still participate in format
probing, to ensure all programs probe exactly the same.  Without that,
QEMU proper would be prone to treat images with a format off the
whitelist as raw when the image's format is probed.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These devices are created automatically, and attempting to create
another one with -device fails with "qemu: hardware error:
register_ioport_write: invalid opaque".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Implemented for virtio-blk and for scsi
Signed-off-by: NNaphtali Sprei <nsprei@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Problem: x86 systems could not survive a few system_resets.

Clear most of IDE state when reset. Implement the missing reset handlers.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

There is absolutely no need to call reset functions when initializing
devices. Since we are already registering them, calling qemu_system_reset()
should suffice. Actually, it is what happens when we reboot the machine,
and using the same process instead of a special case semantics will even
allow us to find bugs easier.

Furthermore, the fact that we initialize things like the cpu quite early,
leads to the need to introduce synchronization stuff like qemu_system_cond.
This patch removes it entirely. All we need to do is call qemu_system_reset()
only when we're already sure the system is up and running

I tested it with qemu (with and without io-thread) and qemu-kvm, and it
seems to be doing okay - although qemu-kvm uses a slightly different patch.

[ v2: user mode still needs cpu_reset, so put it in ifdef. ]
[ v3: leave qemu_system_cond for now. ]
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Line counter doesn't wrap.
Signed-off-by: Nmalc <av1474@comtv.ru>

Unbreaks setup screen of Act1/PL
Signed-off-by: Nmalc <av1474@comtv.ru>

This patch adds SHDC support (-sd sd.img, where sd.img is
larger than 1GB) to qemu.
Signed-off-by: NJason S. McMullan <jason.mcmullan@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

The gPXE rom supports BEV properly.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit:

    commit 97b15621
    virtio: use qdev properties for configuration.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

makes a guest using virtio-net see an empty macaddr because we never
copy the macaddr into the location that virtio_net_get_config() uses.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fixes a couple of issues with msix table access:
- With misbehaving guests, misaligned 4 byte access could overflow
  msix table and cause qemu to segfault. Since PCI spec requires
  host to only issue dword-aligned accesses, as a fix,
  it's enough to mask the address low bits.
- Tables use pci format, not native format, and so
  we must use pci_[sg]et_long on read/write.
Reported-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

wmb must be at least a compiler barrier, even without SMP.
Further, we likely need some rmb()/mb() as well:
I have not audited the code but lguest has mb(),
add a comment for now.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Serial frames always start with a start bit.
This bit was missing in frame size calculation.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Hook up usb_msd_init.

Also rework handling of encrypted block devices,
move the code out vl.c.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a auto_attach field to USBDevice, which is enabled by default.
USB drivers can clear this field in case they do *not* want the device
being attached (i.e. plugged into a usb port) automatically after
successfull init().

Use cases (see next patches):
 * attaching encrypted mass storage devices.
 * -usbdevice host:...
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patchs adds infrastructure to handle -usbdevice via qdev callbacks.
USBDeviceInfo gets a name field (for the -usbdevice driver name) and a
callback for -usbdevice parameter parsing.

The new usbdevice_create() function walks the qdev driver list and looks
for a usb driver with a matching name.  When a parameter parsing
callback is present it is called, otherwise the device is created via
usb_create_simple().
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The pc bios shows up in 'info roms' now.

Note that the BIOS is mapped to two places: The complete rom at the top
of the memory, and the first 128k at 0xe0000.  Only the first place is
listed in 'info roms'.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The rom_add_vga() and rom_add_option() macros are transformed into
functions.  They look at the new rom_enable_driver_roms variable
and only do something if it is set to non-zero, making vga+option rom
loading runtime option.  pc_init() sets rom_enable_driver_roms to 1.

With this in place we can move the rom loading calls from pc.c to the
individual drivers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Also add a new net/checksum.h header
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>