Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5590 c046a42c-6fe2-441c-8c8c-71466251a162

Revision 5500 of the qemu repository removed all code using
ppc_load_xer & ppc_store_xer as well as their implementation.

Another patch fixes it's usage in kvm-userspace for powerpc, but I think
that header can now be cleaned up, therefore this patch to qemu-devel.
Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5589 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5588 c046a42c-6fe2-441c-8c8c-71466251a162

The code in hw/cirrus_vga.c has changed a lot between CVE-2007-1320 has
been announced and the patch has been applied. As a consequence it has
wrongly applied and QEMU is still vulnerable to this bug if using VNC.

(noticed by Jan Niehusmann)
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5587 c046a42c-6fe2-441c-8c8c-71466251a162

Fix build with DEBUG_TCGV enabled.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5586 c046a42c-6fe2-441c-8c8c-71466251a162

(fixes regression introduced by r5575)
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5585 c046a42c-6fe2-441c-8c8c-71466251a162

Fix a warning introduced in r5580 when brlapi is enabled.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5584 c046a42c-6fe2-441c-8c8c-71466251a162

It is safe not to set dpy_refresh and that's used to indicate that the display
doesn't need updates.  This saves us two wakeups per second.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5583 c046a42c-6fe2-441c-8c8c-71466251a162

Spotted by Blue Swirl.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5582 c046a42c-6fe2-441c-8c8c-71466251a162

Mostly code motion.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5581 c046a42c-6fe2-441c-8c8c-71466251a162

The motivating goal behind this is to allow other tools to use the CharDriver
code.  This patch is pure code motion except for the Makefile changes and the
copyright/header in qemu-char.c.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5580 c046a42c-6fe2-441c-8c8c-71466251a162

The goal of this series is to move the CharDriverState code out of vl.c and
into its own file, qemu-char.c.  This patch moves around some declarations so
the next patch can be pure code motion.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5579 c046a42c-6fe2-441c-8c8c-71466251a162

With the recent changes to the main loop, we no longer have unconditional
polling.  This means we can now sleep in select() for much longer than we
previously did.  This patch increases our select() sleep time from 10ms to 5s
which is effectively unlimited since we're going to wake up sooner than that
in almost all circumstances.

With this patch, I see the number of wake-ups with an idle dynamic ticks guest
drop from 80 per second to about 15 times per second.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5578 c046a42c-6fe2-441c-8c8c-71466251a162

Tidy up win32 main loop bits, allow timeout >= 1s, and force timeout to 0 if
there is a pending bottom half.



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5577 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5576 c046a42c-6fe2-441c-8c8c-71466251a162

This patch makes qemu keep track of the character devices in use and
implements a "info chardev" monitor command to print a list.

qemu_chr_open() sticks the devices into a linked list now.  It got a new
argument (label), so there is a name for each device.  It also assigns a
filename to each character device.  By default it just copyes the
filename passed in.  Individual drivers can fill in something else
though.  qemu_chr_open_pty() sets the filename to name of the pseudo tty
allocated.

Output looks like this:

  (qemu) info chardev
  monitor: filename=unix:/tmp/run.sh-26827/monitor,server,nowait
  serial0: filename=unix:/tmp/run.sh-26827/console,server
  serial1: filename=pty:/dev/pts/5
  parallel0: filename=vc:640x480
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5575 c046a42c-6fe2-441c-8c8c-71466251a162

I noticed the qemu_aio_flush was doing nothing at all. And a flood of
cmd_writeb commands leading to a noop-invocation of qemu_aio_flush
were executed.

In short all 'memset;goto redo' places must be fixed to use the bh and
not to call the callback in the context of bdrv_aio_read or the
bdrv_aio_read model falls apart. Reading from qcow2 holes is possible
with phyisical readahead (kind of breada in linux buffer cache).

This is needed at least for scsi, ide is lucky (or it has been
band-aided against this API breakage by fixing the symptom and not the
real bug).

Same bug exists in qcow of course, can be fixed later as it's less
urgent.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5574 c046a42c-6fe2-441c-8c8c-71466251a162

The current DMA routines are driven by a call in main_loop_wait() after every
select.

This patch converts the DMA code to be driven by a constantly rescheduled
bottom half.  The advantage of using a scheduled bottom half is that we can
stop scheduling the bottom half when there no DMA channels are runnable.  This
means we can potentially detect this case and sleep longer in the main loop.

The only two architectures implementing DMA_run() are cris and i386.  For cris,
I converted it to a simple repeating bottom half.  I've only compile tested
this as cris does not seem to work on a 64-bit host.  It should be functionally
identical to the previous implementation so I expect it to work.

For x86, I've made sure to only fire the DMA bottom half if there is a DMA
channel that is runnable.  The effect of this is that unless you're using sb16
or a floppy disk, the DMA bottom half never fires.

You probably should test this malc.  My own benchmarks actually show slight
improvement by it's possible the change in timing could affect your demos.

Since v1, I've changed the code to use a BH instead of a timer.  cris at least
seems to depend on faster than 10ms polling.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5573 c046a42c-6fe2-441c-8c8c-71466251a162

Bottom halves are supposed to not complete until the next iteration of the main
loop.  This is very important to ensure that guests can not cause stack
overflows in the block driver code.  Right now, if you attempt to schedule a
bottom half within a bottom half callback, you will enter an infinite loop.

This patch uses the same logic that we use for the IOHandler loop to make the
bottom half processing robust in list manipulation while in a callback.

This patch also introduces idle scheduling for bottom halves.  qemu_bh_poll()
returns an indication of whether any bottom halves were successfully executed.
qemu_aio_wait() uses this to immediately return if a bottom half was executed
instead of waiting for a completion notification.

qemu_bh_schedule_idle() works around this by not reporting the callback has
run in the qemu_bh_poll loop.  qemu_aio_wait() probably needs some refactoring
but that would require a larger code audit.  idle scheduling seems like a good
compromise.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>




git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5572 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5571 c046a42c-6fe2-441c-8c8c-71466251a162

A target_ulong may be 64-bit.  Passing it to a function expecting a 32-bit
pointer is wrong and unfortunately happens to work for x86.  It won't work on
big endian hosts though.  Change the code to work properly on all hosts.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5570 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5569 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5568 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: Avi Kivity <avi@redhat.com> 
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5567 c046a42c-6fe2-441c-8c8c-71466251a162

Clean-up machine definitions.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5566 c046a42c-6fe2-441c-8c8c-71466251a162

The shmat syscall returns an address, so we must use the
print_syscall_ret_addr function.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5565 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5564 c046a42c-6fe2-441c-8c8c-71466251a162

Move up the warp around test because line
'end = TARGET_PAGE_ALIGN(start+len);'
can interfere with it.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5563 c046a42c-6fe2-441c-8c8c-71466251a162

We must call the writev even if an iovec element is invalid. For
example, if the second element is invalid, the linux process the first
one.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5562 c046a42c-6fe2-441c-8c8c-71466251a162

We can't call the libc _exit function because it calls the exit_group
host syscall. We must call directly the exit host syscall.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5561 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5560 c046a42c-6fe2-441c-8c8c-71466251a162

Spotted by Blue Swirl.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5559 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5558 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5557 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5556 c046a42c-6fe2-441c-8c8c-71466251a162

Also fix rlwimi and rldimi for corner cases.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5555 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5554 c046a42c-6fe2-441c-8c8c-71466251a162

For outgoing DMA channels, keep processing descriptors until hitting end
of list.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5553 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5552 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5551 c046a42c-6fe2-441c-8c8c-71466251a162