# By Eiichi Tsukata (2) and Kazuya Saito (2)
# Via Stefan Hajnoczi
* stefanha/tracing:
  trace: document ftrace backend
  trace: Add ftrace tracing backend
  kvm-all: add kvm_run_exit tracepoint
  kvm-all: add kvm_ioctl, kvm_vm_ioctl, kvm_vcpu_ioctl tracepoints

Message-id: 1367582485-15579-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Amos Kong (1) and Jason Wang (1)
# Via Stefan Hajnoczi
* stefanha/net:
  tap: properly initialize vhostfds
  net: make network client name unique

Message-id: 1367582254-15060-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Fam Zheng (8) and others
# Via Stefan Hajnoczi
* stefanha/block:
  qemu-iotests: Filter out 'adapter_type'
  nbd: support large NBD requests
  nbd: use g_slice_new() instead of a freelist
  qemu-iotests: Filter out vmdk creation options
  vmdk: add bdrv_co_write_zeroes
  vmdk: store fields of VmdkMetaData in cpu endian
  vmdk: change magic number to macro
  vmdk: Add option to create zeroed-grain image
  vmdk: add support for “zeroed‐grain” GTE
  vmdk: named return code.
  blockdev: Replace "undefined error" in qmp_block_resize
  block: add read-only support to VHDX image format.
  block: initial VHDX driver support framework - supports open and probe
  block: vhdx header for the QEMU support of VHDX images
  qemu: add castagnoli crc32c checksum algorithm

Add documentation of ftrace backend.
Signed-off-by: NEiichi Tsukata <eiichi.tsukata.xh@hitachi.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch adds a ftrace tracing backend which sends trace event to
ftrace marker file. You can effectively compare qemu trace data and
kernel(especially, kvm.ko when using KVM) trace data.
The ftrace backend is restricted to Linux only.

To try out the ftrace backend:

 $ ./configure --trace-backend=ftrace
 $ make

if you use KVM, enable kvm events in ftrace:

 # sudo echo 1 > /sys/kernel/debug/tracing/events/kvm/enable

After running qemu by root user, you can get the trace:

 # cat /sys/kernel/debug/tracing/trace
Signed-off-by: NEiichi Tsukata <eiichi.tsukata.xh@hitachi.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch enable us to know exit reason of KVM_RUN. It will help us
know where the trouble is caused.
Signed-off-by: NKazuya Saito <saito.kazuya@jp.fujitsu.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch adds tracepoints at ioctl to kvm. Tracing these ioctl is
useful for clarification whether the cause of troubles is qemu or kvm.
Signed-off-by: NKazuya Saito <saito.kazuya@jp.fujitsu.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Only tap->vhostfd were checked net_init_tap_one(), but tap->vhostfds were
forgot, this will lead qemu to ignore all fds passed by management through
vhostfds, and tries to create vhost_net device itself. Fix by adding this check
also.
Reportyed-by: NMichal Privoznik <mprivozn@redhat.com>
Cc: Michal Privoznik <mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

assign_name() creates a name MODEL.NUM, where MODEL is the client's model,
and NUM is the number of MODELs that already exist.

Markus added NIC naming for non-VLAN clients in commit 53e51d85.
commit d33d93b2 incorrectly added a judgement of net-hub. It caused
net clients created with -netdev get same names.

eg:
 # qemu-upstream -device virtio-net-pci,netdev=h1 -netdev tap,id=h1 \
                    -device virtio-net-pci,netdev=h2 -netdev tap,id=h2 ..
 (qemu) info network
 virtio-net-pci.0: index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
  \ h1: index=0,type=tap,ifname=tap0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
 virtio-net-pci.0: index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:57
  \ h2: index=0,type=tap,ifname=tap1,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown

This patch removed the check of nic-hub, and created unique names for
all net clients that have same model.

v2: update commitlog & comments
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Filter out vmdk creation option 'adapter_type' for vmdk. So that tests
with an explicit './check -o adapter_type=XXX' will not fail.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The Linux nbd driver recently increased the maximum supported request
size up to 32 MB:

  commit 078be02b80359a541928c899c2631f39628f56df
  Author: Michal Belczyk <belczyk@bsd.krakow.pl>
  Date:   Tue Apr 30 15:28:28 2013 -0700

      nbd: increase default and max request sizes

      Raise the default max request size for nbd to 128KB (from 127KB) to get it
      4KB aligned.  This patch also allows the max request size to be increased
      (via /sys/block/nbd<x>/queue/max_sectors_kb) to 32MB.

QEMU's 1 MB buffers are too small to handle these requests.

This patch allocates data buffers dynamically and allows up to 32 MB per
request.
Reported-by: NNick Thomas <nick@bytemark.co.uk>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use GLib's efficient slice allocator instead of open-coding the request
freelist.  This patch simplifies the NBDRequest code.

Now we qemu_blockalign() the req->data buffer each time but the next
patch switches from a fixed size buffer to a dynamic size anyway.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Avoid the mini constant pool for armv7, and avoid replicating
the test for pre-v7.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Found by inspection, since the effect of the bug was simply to
send all memory ops through the slow path.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This change corrects and simplifies how discard is calculated for shift
left logical vector instructions. It is used to detect overflow and set bit
22 in the DSPControl register.

The existing tests (shll_ph.c, shll_qb.c) are extended with the corner cases
that expose incorrectness in the previous implementation.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Cover new image creation options for vmdk, so we can use '-o
zeroed_grain=XXX' and '-o subformat=XXX' to run the tests successfully.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use special offset to write zeroes efficiently, when zeroed-grain GTE is
available. If zero-write an allocated cluster, cluster is leaked because
its offset pointer is overwritten by "0x1".
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Previously VmdkMetaData.offset is stored little endian while other
fields are cpu endian. This changes offset to cpu endian and convert
before writing to image.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Two hard coded flag bits are changed to macros.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Add image create option "zeroed-grain" to enable zeroed-grain GTE
feature of vmdk sparse extents. When this option is on, header version
of newly created extent will be 2 and VMDK4_FLAG_ZERO_GRAIN flag bit
will be set.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Introduced support for zeroed-grain GTE, as specified in Virtual Disk
Format 5.0[1].

    Recent VMware hosted platform products support a new “zeroed‐grain”
    grain table entry (GTE). The zeroed‐grain GTE returns all zeros on
    read.  In other words, the zeroed‐grain GTE indicates that a grain
    in the child disk is zero‐filled but does not actually occupy space
    in storage.  A sparse extent with zeroed‐grain GTE has the following
    in its header:

     * SparseExtentHeader.version = 2
     * SparseExtentHeader.flags has bit 2 set

    Other than the new flag and the possibly zeroed‐grain GTE, version 2
    sparse extents are identical to version 1.  Also, a zeroed‐grain GTE
    has value 0x1 in the GT table.

[1] Virtual Disk Format 5.0, http://www.vmware.com/support/developer/vddk/vmdk_50_technote.pdf?src=vmdkSigned-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Internal routines in vmdk.c previously return -1 on error and 0 on
success. More return values are useful for future changes such as
zeroed-grain GTE. Change all the magic `return 0` and `return -1` to
macro names:

 * VMDK_OK      0
 * VMDK_ERROR   (-1)
 * VMDK_UNALLOC (-2)
 * VMDK_ZEROED  (-3)
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We have an errno value that can be displayed, so we should just do that.
An easy way to reproduce this case is to resize a raw image to a size
that is too large for the host file system.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds in read-only support to the VHDX image format.  This supports
reads for fixed-size, and dynamic sized VHDX images.

Differencing files are still unsupported.

The image must be opened without BDRV_O_RDWR set, because we do not
yet update the headers.  I.e., pass 'readonly=on' in the drive image
options from the QEMU commandline.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This is the initial block driver framework for VHDX image support
(i.e. Hyper-V image file formats), that supports opening VHDX files, and
parsing the headers.

This commit does not yet enable:
    - reading
    - writing
    - updating the header
    - differencing files (images with parents)
    - log replay / dirty logs (only clean images)

This is based on Microsoft's VHDX specification:
    "VHDX Format Specification v0.95", published 4/12/2012
    https://www.microsoft.com/en-us/download/details.aspx?id=29681Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This is based on Microsoft's VHDX specification:
    "VHDX Format Specification v0.95", published 4/12/2012
    https://www.microsoft.com/en-us/download/details.aspx?id=29681

These structures define the various header, metadata, and other
block structures defined in the VHDX specification.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds the Castagnoli CRC32C algorithm, using the 0x11EDC6F41
polynomial.

This is extracted from the linux kernel cryptographic crc32.c module.

The algorithm is based on:

Castagnoli93: Guy Castagnoli and Stefan Braeuer and Martin Herrman
             "Optimization of Cyclic Redundancy-Check Codes with 24
              and 32 Parity Bits", IEEE Transactions on Communication,
              Volume 41, Number 6, June 1993
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

# By Igor Mammedov (21) and others
# Via Andreas Färber
* afaerber/qom-cpu: (29 commits)
  Drop redundant resume_all_vcpus() from main()
  cpus: Fix pausing TCG CPUs while in vCPU thread
  target-i386: Replace cpuid_*features fields with a feature word array
  target-i386: Break CPUID feature definition lines
  target-i386/kvm.c: Code formatting changes
  target-i386: Group together level, xlevel, xlevel2 fields
  pc: Implement QEMUMachine::hot_add_cpu hook
  QMP: Add cpu-add command
  Add hot_add_cpu hook to QEMUMachine
  target-i386: Move APIC to ICC bus
  target-i386: Attach ICC bus to CPU on its creation
  target-i386: Introduce ICC bus/device/bridge
  cpu: Move cpu_write_elfXX_note() functions to CPUState
  kvmvapic: Make dependency on sysbus.h explicit
  target-i386: Replace MSI_SPACE_SIZE with APIC_SPACE_SIZE
  target-i386: Do not allow to set apic-id once CPU is realized
  target-i386: Introduce apic-id CPU property
  target-i386: Introduce feat2prop() for CPU properties
  acpi_piix4: Add infrastructure to send CPU hot-plug GPE to guest
  cpu: Add helper cpu_exists(), to check if CPU with specified id exists
  ...

# By Andreas Färber (1) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  pvscsi: fix compilation on 32 bit hosts
  Trivial grammar and spelling fixes
  configure: Pick up libseccomp include path

VCPUs are either resumed directly via vm_start(), after the incoming
migration is done, or when a continue command is issued. We don't need
the explicit resume before entering main_loop().
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Due to a preceding while loop, no CPU would've been put into stopped
state. Reinitialize the variable.
This fixes commit d798e974 (Allow to use
pause_all_vcpus from VCPU context) for non-KVM case.

While at it, change a 0 to false, amending commit
4fdeee7c (cpu: Move stop field to
CPUState).
Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This replaces the feature-bit fields on both X86CPU and x86_def_t
structs with an array.

With this, we will be able to simplify code that simply does the same
operation on all feature words (e.g. kvm_check_features_against_host(),
filter_features_for_kvm(), add_flagname_to_bitmaps(), CPU feature-bit
property lookup/registration, and the proposed "feature-words" property)

The following field replacements were made on X86CPU and x86_def_t:

  (cpuid_)features         -> features[FEAT_1_EDX]
  (cpuid_)ext_features     -> features[FEAT_1_ECX]
  (cpuid_)ext2_features    -> features[FEAT_8000_0001_EDX]
  (cpuid_)ext3_features    -> features[FEAT_8000_0001_ECX]
  (cpuid_)ext4_features    -> features[FEAT_C000_0001_EDX]
  (cpuid_)kvm_features     -> features[FEAT_KVM]
  (cpuid_)svm_features     -> features[FEAT_SVM]
  (cpuid_)7_0_ebx_features -> features[FEAT_7_0_EBX]
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Break lines on kvm_check_features_against_host(), kvm_cpu_fill_host(),
and builtin_x86_defs, so they don't get too long once the *_features
fields are replaced by an array.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Add appropriate spaces around operators, and break line where it needs
to be broken to allow feature-words array to be introduced without
having too-long lines.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Consolidate level, xlevel, xlevel2 fields in x86_def_t and CPUX86State.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This fixes the following error:
In file included from qemu/include/trace.h:4:0,
                 from trace/generated-events.c:3:
./trace/generated-tracers.h: In function ‘trace_pvscsi_get_sg_list’:
./trace/generated-tracers.h:4271:9: error: format ‘%lu’ expects argument of
type ‘long unsigned int’, but argument 4 has type ‘size_t’ [-Werror=format]
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

similiar -> similar
recieve -> receive
transfered -> transferred
preperation -> preparation

Most changes are in comments, one modifies a parameter name in a function
prototype.

The spelling fixes were made using codespell.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

openSUSE 12.3 has seccomp.h in /usr/include/libseccomp-1.0.1,
so add `pkg-config --cflags libseccomp` output to QEMU_CFLAGS.

Cc: qemu-stable@nongnu.org
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Adds "cpu-add id=xxx" QMP command.

cpu-add's "id" argument is a CPU number in a range [0..max-cpus)

Example QMP command:
 -> { "execute": "cpu-add", "arguments": { "id": 2 } }
 <- { "return": {} }
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>