It was useless even 3 years ago, so it can probably safely go away:
https://lists.nongnu.org/archive/html/qemu-devel/2012-03/msg02427.htmlSigned-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log
to the monitor before it's being initialized), and also nothing else in
qemu logs to the monitor.

This log to monitor feature was the last thing that used the default_mon
variable, so I removed it too (as using it can cause problems).
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

email bounces, with a appearently permanent error:
"av1474@comtv.ru mail receiving disabled, rejecting"
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NGonglei <arei.gonglei@huawei.com>

Since SDL uses a lot of global data, we can't create independent
instances of sdl audio backend.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

qpa_audio_init did not clean up resources properly if the initialization
failed. This hopefully fixes it.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Currently the opaque pointer returned by audio_driver's init is only
exposed to the driver's fini, but not to audio_pcm_ops. This way if
someone wants to share a variable with the driver and the pcm, he must
use global variables. This patch fixes it by adding a third parameter to
audio_pcm_op's init_out and init_in.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

DirectSound should be a superior choice on Windows.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

ESD is no longer developed and replaced by PulseAudio.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

# gpg: Signature made Fri Jun 12 13:57:20 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  qmp/hmp: add rocker device support
  rocker: bring link up/down on PHY enable/disable
  rocker: update tests using hw-derived interface names
  rocker: Add support for phys name
  iohandler: Change return type of qemu_set_fd_handler to "void"
  event-notifier: Always return 0 for posix implementation
  xen_backend: Remove unused error handling of qemu_set_fd_handler
  oss: Remove unused error handling of qemu_set_fd_handler
  alsaaudio: Remove unused error handling of qemu_set_fd_handler
  main-loop: Drop qemu_set_fd_handler2
  Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handler
  tap: Drop tap_can_send
  net/socket: Drop net_socket_can_send
  netmap: Drop netmap_can_send
  l2tpv3: Drop l2tpv3_can_send
  stubs: Add qemu_set_fd_handler
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

sh4 linux-user cpu and hwcap
misc optimizations and cleanup
convert r2d to new MMIO accessor style

# gpg: Signature made Fri Jun 12 11:28:43 2015 BST using RSA key ID 1DDD8C9B
# gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>"
# gpg:                 aka "Aurelien Jarno <aurelien@jarno.fr>"
# gpg:                 aka "Aurelien Jarno <aurel32@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7746 2642 A9EF 94FD 0F77  196D BA9C 7806 1DDD 8C9B

* remotes/aurel/tags/pull-sh4-next-20150612:
  target-sh4: remove dead code
  target-sh4: factorize fmov implementation
  target-sh4: split out Q and M from of SR and optimize div1
  target-sh4: optimize negc using add2 and sub2
  target-sh4: optimize subc using sub2
  target-sh4: optimize addc using add2
  target-sh4: Split out T from SR
  target-sh4: use bit number for SR constants
  sh4/r2d: convert to new MMIO accessor style
  linux-user: Add HWCAP for SH4
  linux-user: Default sh4 to sh7785
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add QMP/HMP support for rocker devices.  This is mostly for debugging purposes
to see inside the device's tables and port configurations.  Some examples:

(qemu) info rocker sw1
name: sw1
id: 0x0000013512005452
ports: 4

(qemu) info rocker-ports sw1
            ena/    speed/ auto
      port  link    duplex neg?
     sw1.1  up     10G  FD  No
     sw1.2  up     10G  FD  No
     sw1.3  !ena   10G  FD  No
     sw1.4  !ena   10G  FD  No

(qemu) info rocker-of-dpa-flows sw1
prio tbl hits key(mask) --> actions
2    60       pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e
2    60       pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58
3    50       vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58
3    50  1    vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00
3    50  2    vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60
2    60  1    pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1
3    50  2    vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60
2    60  1    pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58
3    50       vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58
3    50  1    vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60
1    60  173  pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000
1    60  6    pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000
1    60  174  pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000
1    60  174  pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000
1    60  6    pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000
1    60  181  pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000
1    10  715  pport 2 --> apply new vlan 2 goto tbl 20
1    60  177  pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000
1    60  174  pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000
1    10  717  pport 1 --> apply new vlan 1 goto tbl 20
1    0   1432 pport 0(0xffff) --> goto tbl 10

(qemu) info rocker-of-dpa-groups sw1
id (decode) --> buckets
0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000]
0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1
0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2
0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0
0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0
0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000]

[Added "query-" prefixes to rocker.json commands as suggested by Eric
Blake <eblake@redhat.com>.
--Stefan]
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When the OS driver enables/disables the port, go ahead and set the port's
link status to up/down in response to the change.  This more closely
emulates real hardware when the PHY for the port is brought up/down
and the PHY negotiates carrier (link status) with link partner.  In
the case of qemu, the virtual rocker device can't really do link
negotiation with the link partner as that requires signally over a
physical medium (the wire), so just pretend the negotiation was
successful and bring the link up when the port is enabled.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1433985681-56138-4-git-send-email-sfeldma@gmail.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

With previous patch to support phy name attribute for each port, the OS
can name port interfaces using the hw-derived name.  So update rocker
tests to use the new hw-derived interface names.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1433985681-56138-3-git-send-email-sfeldma@gmail.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Add ROCKER_TLV_CMD_PORT_SETTINGS_PHYS_NAME to port settings. This attribute
exports the port name to the guest OS allowing it to name interfaces with
sensible defaults.

Mostly done by Scott for phys_id support; adapted to phys_name by David.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Message-id: 1433985681-56138-2-git-send-email-sfeldma@gmail.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-14-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

qemu_set_fd_handler cannot fail, let's always return 0.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-13-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The function cannot fail, so the check is superfluous.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-12-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The function cannot fail, so the check is superfluous.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-11-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The function cannot fail, so the check is superfluous.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-10-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

All users are converted to qemu_set_fd_handler now, drop
qemu_set_fd_handler2 and IOHandlerRecord.fd_read_poll.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-9-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Done with following Coccinelle semantic patch, plus manual cosmetic changes in
net/*.c.

    @@
    expression E1, E2, E3, E4;
    @@
    -   qemu_set_fd_handler2(E1, NULL, E2, E3, E4);
    +   qemu_set_fd_handler(E1, E2, E3, E4);
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-8-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be sent to peer when it arrives. If the device can't
receive, it will be queued to incoming_queue, and when the device status
changes, this queue will be flushed.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-7-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be sent to peer when it arrives. If the device can't
receive, it will be queued to incoming_queue, and when the device status
changes, this queue will be flushed.

If the peer is not ready, disable the read poll until send completes.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-6-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be copied from s->fd to s->iov when it arrives. If the
device can't receive, it will be queued to incoming_queue, and when the
device status changes, this queue will be flushed.

Also remove the qemu_can_send_packet() check in netmap_send. If it's
true, we are good; if it's false, the qemu_sendv_packet_async would
return 0 and read poll will be disabled until netmap_send_completed is
called.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-5-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be copied from s->fd to s->msgvec when it arrives. If the
device can't receive, it will be queued to incoming_queue, and when the
device status changes, this queue will be flushed.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-4-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Some qemu_set_fd_handler2 stub callers will be converted to
call qemu_set_fd_handler, add this stub for them before making the
change.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-2-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

MIPS patches 2015-06-12

Changes:
* improve dp8393x network card and rc4030 chipset emulation
* support misaligned R6 and MSA memory accesses
* support MIPS eXtended and Large Physical Addressing
* add Config5.FRE bit and ERETNC instruction (Config5.LLB)
* support ememsize on MALTA

# gpg: Signature made Fri Jun 12 09:38:11 2015 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4  4FC0 5211 8E3C 0B29 DA6B

* remotes/lalrae/tags/mips-20150612: (29 commits)
  target-mips: enable XPA and LPA features
  target-mips: remove misleading comments in translate_init.c
  target-mips: add MTHC0 and MFHC0 instructions
  target-mips: add CP0.PageGrain.ELPA support
  target-mips: support Page Frame Number Extension field
  target-mips: extend selected CP0 registers to 64-bits in MIPS32
  target-mips: correct MFC0 for CP0.EntryLo in MIPS64
  net/dp8393x: fix hardware reset
  net/dp8393x: correctly reset in_use field
  net/dp8393x: add load/save support
  net/dp8393x: add PROM to store MAC address
  net/dp8393x: QOM'ify
  net/dp8393x: use dp8393x_ prefix for all functions
  net/dp8393x: do not use old_mmio accesses
  net/dp8393x: always calculate proper checksums
  dma/rc4030: convert to QOM
  dma/rc4030: use trace events instead of custom logging
  dma/rc4030: document register at offset 0x210
  dma/rc4030: do not use old_mmio accesses
  dma/rc4030: use AddressSpace and address_space_rw in users
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

migration/next for 20150612

# gpg: Signature made Fri Jun 12 05:56:21 2015 BST using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"

* remotes/juanquintela/tags/migration/20150612: (21 commits)
  Remove unneeded memset
  Rename RDMA structures to make destination clear
  Teach analyze-migration.py about section footers
  Add a protective section footer
  Disable section footers on older machine types
  Merge section header writing
  Move loadvm_handlers into MigrationIncomingState
  Move copy out of qemu_peek_buffer
  Create MigrationIncomingState
  qemu_ram_foreach_block: pass up error value, and down the ramblock name
  Split header writing out of qemu_savevm_state_begin
  Add qemu_get_counted_string to read a string prefixed by a count byte
  migration: Use normal VMStateDescriptions for Subsections
  migration: create savevm_state
  migration: Remove duplicated assignment of SETUP status
  rdma: Fix qemu crash when IPv6 address is used for migration
  arch_init: Clean up the duplicate variable 'len' defining in ram_load()
  migration: reduce include files
  migration: Add myself to the copyright list of both files
  migration: move savevm.c inside migration/
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Splitting Q and M out of SR, it's possible to optimize div1 by using
TCG code instead of an helper.

At the same time removed the now unused gen_copy_bit_i32 function.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>