- 04 3月, 2014 3 次提交
-
-
由 Peter Maydell 提交于
* remotes/bonzini/scsi-next: block/iscsi: fix segfault if writesame fails scsi-disk: Add support for port WWN and index descriptors in VPD page 83h block/iscsi: query for supported VPD pages block/iscsi: fix deadlock on scsi check condition scsi-bus: Fix transfer length for VERIFY with BYTCHK=11b scsi: report thin provisioning errors with werror=report scsi: Change scsi sense buf size to 252 Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* remotes/mcayland/qemu-sparc: sun4m: Add Sun CG3 framebuffer initialisation function sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM sun4m: fix slavio timer RUN/STOP bit sun4m: Set HostID in NVRAM Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Stefan Weil 提交于
Comment from Makefile.objs: The system emulation needs this dependency (which was missing in Makefile), otherwise builds without tools (or massive parallel builds) fail. Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 28 2月, 2014 2 次提交
-
-
由 Fam Zheng 提交于
Compiling util/modules.c with modules enabled fails now. Fix it by including qemu-common.h before #ifdef testing in module.c. Signed-off-by: NFam Zheng <famz@redhat.com> Message-id: 1393453893-12125-1-git-send-email-famz@redhat.com Reviewed-by: NHu Tao <hutao@cn.fujitsu.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* remotes/kvm/uq/master: KVM: Use return value for error print Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 27 2月, 2014 35 次提交
-
-
由 Peter Maydell 提交于
Updates include: - Coverify fixes for vfio & pci-assign (Markus) - VFIO blacklisting support for known brokwn PCI option ROMs (Bandan) # gpg: Signature made Wed 26 Feb 2014 18:15:28 GMT using RSA key ID 3BB08B22 # gpg: Can't check signature: public key not found * remotes/awilliam/tags/vfio-pci-for-qemu-20140226.0: vfio: blacklist loading of unstable roms qdev-monitor: set DeviceState opts before calling realize pci-assign: Fix potential read beyond buffer on -EBUSY vfio: Fix overrun after readlink() fills buffer completely Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Mark Cave-Ayland 提交于
In order to allow the user to choose the framebuffer for sparc-softmmu, add -vga tcx and -vga cg3 options to the QEMU command line. If no option is specified, the default TCX framebuffer is used. Since proprietary FCode ROMs use a resolution of 1152x900, slightly relax the validation rules to allow both displays to be initiated at the higher resolution used by these ROMs upon request (OpenBIOS FCode ROMs default to the normal QEMU sun4m default resolution of 1024x768). Finally move any fprintf(stderr ...) statements in the areas affected by this patch over to the new error_report() function. Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com>
-
由 Mark Cave-Ayland 提交于
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating systems such as early Solaris that do not have drivers for TCX. Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com>
-
由 Mark Cave-Ayland 提交于
The sun4m architecture has one 'system' timer and one timer per CPU. The CPU timers can be configured in two modes: * 22 bits Counter/Timer. Periodic interrupts. * 54 bits User timer. For profiling. In this mode, the Run/Stop bit controls the timer. The run/stop bit controls the timer only when it is in "User" mode, but its state shall be persistent. Signed-off-by: NOlivier Danet <odanet@caramail.com> Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
-
由 Mark Cave-Ayland 提交于
On SparcStations, the HostID field in the NVRAM is equal to the last three bytes of the MAC address (which is also stored in the NVRAM). This constant is used as an identification/serial number on Solaris. Signed-off-by: NOlivier Danet <odanet@caramail.com> Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
-
由 Peter Maydell 提交于
target-arm queue: * fixes for various Coverity-spotted bugs * support new KVM device control API for VGIC * support KVM VGIC save/restore/migration * more AArch64 system mode foundations * support ARMv8 CRC instructions for A32/T32 * PL330 minor fixes and cleanup # gpg: Signature made Wed 26 Feb 2014 17:51:32 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140226: (45 commits) dma/pl330: implement dmaadnh instruction dma/pl330: Fix buffer depth dma/pl330: Add event debugging printfs dma/pl330: Rename parent_obj dma/pl330: printf format type sweep. dma/pl330: Fix misleading type dma/pl330: Delete overly verbose debug printf target-arm: Add support for AArch32 ARMv8 CRC32 instructions include/qemu/crc32c.h: Rename include guards to match filename target-arm: Add utility function for checking AA32/64 state of an EL target-arm: Implement AArch64 view of CPACR target-arm: A64: Implement MSR (immediate) instructions target-arm: Store AIF bits in env->pstate for AArch32 target-arm: A64: Implement WFI target-arm: Get MMU index information correct for A64 code target-arm: Implement AArch64 OSLAR_EL1 sysreg as WI target-arm: Implement AArch64 dummy breakpoint and watchpoint registers target-arm: Implement AArch64 ID and feature registers target-arm: Implement AArch64 generic timers target-arm: Implement AArch64 MPIDR ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
migration/next for 20140225 # gpg: Signature made Tue 25 Feb 2014 14:04:31 GMT using RSA key ID 5872D723 # gpg: Can't check signature: public key not found * remotes/juanquintela/tags/migration/20140225: rdma: rename 'x-rdma' => 'rdma' Fix two XBZRLE corruption issues Fix vmstate_info_int32_le comparison/assign qemu_file: use fwrite() correctly Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Net patches # gpg: Signature made Tue 25 Feb 2014 13:32:33 GMT using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/net-pull-request: virtio-net: use qemu_get_queue() where possible vhost_net: use offload API instead of bypassing it net: remove implicit peer from offload API net: Disable netmap backend when not supported net: add offloading support to netmap backend net: make tap offloading callbacks static net: virtio-net and vmxnet3 use offloading API net: TAP uses NetClientInfo offloading callbacks net: extend NetClientInfo for offloading net: change vnet-hdr TAP prototypes opencores_eth: flush queue whenever can_receive can go from false to true Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
hda-audio: qom cleanups # gpg: Signature made Mon 24 Feb 2014 12:19:48 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-audio-3: hda-audio: qom cleanups Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Bandan Das 提交于
Certain cards such as the Broadcom BCM57810 have rom quirks that exhibit unstable system behavior duing device assignment. In the particular case of 57810, rom execution hangs and if a FLR follows, the device becomes inoperable until a power cycle. This change blacklists loading of rom for such cards unless the user specifies a romfile or rombar=1 on the cmd line Signed-off-by: NBandan Das <bsd@redhat.com> Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
-
由 Bandan Das 提交于
Setting opts before the realize property is set allows the following patch to make decisions based on whether the user specified "rombar". This also avoids having to create a new tristate property especially for this purpose Reviewed-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NBandan Das <bsd@redhat.com> Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
-
由 Markus Armbruster 提交于
readlink() doesn't write a terminating null byte. assign_failed_examine() passes the unterminated string to strrchr(). Oops. Terminate it. Spotted by Coverity. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
-
由 Markus Armbruster 提交于
readlink() returns the number of bytes written to the buffer, and it doesn't write a terminating null byte. vfio_init() writes it itself. Overruns the buffer when readlink() filled it completely. Fix by treating readlink() filling the buffer completely as error, like we do in pci-assign.c's assign_failed_examine(). Spotted by Coverity. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
-
由 Peter Crosthwaite 提交于
Implement the missing DMAADNH instruction. This is a minor variant of the DMAADDH instruction, so factor out to a common implementation for both (dmaadxh). Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 73ab13532a7cae53441da89b46c279b5f50785e3.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Crosthwaite 提交于
This is the product of the data-width and the depth arguments, I.e the depth of the FIFO is in terms of data entries and not bytes (which is what the original implementation was suggesting). Fix. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: c34de31031511538ccdb3164b48ee8a6a973ebd4.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Crosthwaite 提交于
These are helpful to anyone trying to debug event sequencing. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: e82a0ad804db3de4f46839e55a9d287735ef870d.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Crosthwaite 提交于
As per current QOM conventions. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: abb137347ea1ee9c31487b544f3d5435fb17f6a4.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Crosthwaite 提交于
Use PRI formats as appropriate rather than raw %x and %d. This fixes debug printfery on some host platforms. Fix types of debug only variables as appropriate. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: dbb5f5fd048b2d4a3cb5c6357577d11211a7a585.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Crosthwaite 提交于
This type really should just be a regular int as no usages rely on it's 32 bitness (it's only meaningful as a bit position and not a bit mask). This also fixes a printf which uses the variable with a regular %d. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 2a99d31f377aee371476d9da8fd0d1b7efa30f63.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Crosthwaite 提交于
When using event synchronisation, this particular debug printf floods. Just delete it. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: dd94d19493f97c47497b9d8caf74ca43e70d58fd.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Will Newton 提交于
Add support for AArch32 CRC32 and CRC32C instructions added in ARMv8 and add a CPU feature flag to enable these instructions. The CRC32-C implementation used is the built-in qemu implementation and The CRC-32 implementation is from zlib. This requires adding zlib to LIBS to ensure it is linked for the linux-user binary. Signed-off-by: NWill Newton <will.newton@linaro.org> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1393411566-24104-3-git-send-email-will.newton@linaro.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Will Newton 提交于
Signed-off-by: NWill Newton <will.newton@linaro.org> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1393411566-24104-2-git-send-email-will.newton@linaro.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
There are various situations where we need to behave differently depending on whether a given exception level is in AArch64 or AArch32 state. The state of the current exception level is stored in env->aarch64, but there's no equivalent guest-visible architected state bits for the status of the exception levels "above" the current one which may still affect execution. At the moment we only support EL1 (ie no EL2 or EL3) and insist that AArch64 capable CPUs run with EL1 in AArch64 state, but these may change in the future, so abstract out the "what state is this?" check into a utility function which can be enhanced later if necessary. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
Implement the AArch64 view of the CPACR. The AArch64 CPACR is defined to have a lot of RES0 bits, but since the architecture defines that RES0 bits may be implemented as reads-as-written and we know that a v8 CPU will have no registered coprocessors for cp0..cp13 we can safely implement the whole register this way. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
Implement the MSR (immediate) instructions, which can update the PSTATE SP and DAIF fields. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
To avoid complication in code that otherwise would not need to care about whether EL1 is AArch32 or AArch64, we should store the interrupt mask bits (CPSR.AIF in AArch32 and PSTATE.DAIF in AArch64) in one place consistently regardless of EL1's mode. Since AArch64 has an extra enable bit (D for debug exceptions) which isn't visible in AArch32, this means we need to keep the enables in env->pstate. (This is also consistent with the general approach we're taking that we handle 32 bit CPUs as being like AArch64/ARMv8 CPUs but which only run in 32 bit mode.) Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
Implement the WFI instruction for A64; this just involves wiring up the instruction, and adding a gen_a64_set_pc_im() which was accidentally omitted from the A64 decoder top loop. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
Emit the correct MMU index information for loads and stores from A64 code, rather than hardwiring it to "always kernel mode", by storing the exception level in the TB flags, and make cpu_mmu_index() return the right answer when the CPU is in AArch64 mode. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
Define a dummy version of the AArch64 OSLAR_EL1 system register which just ignores writes. Linux will always write to this (it is the OS lock used for debugging), but we don't support debug. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
In AArch64 the breakpoint and watchpoint registers are mandatory, so the kernel always accesses them on bootup. Implement dummy versions, which read as written but have no actual effect. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
Implement the AArch64-specific ID and feature registers. Although many of these are currently not used by the architecture (and so always zero for all implementations), we define the full set of fields in the ARMCPU struct for symmetry. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
Implement the AArch64 view of the generic timer system registers. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Implement the AArch64 MPIDR system register. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
Implement the AArch64 TTBR* registers. For v7 these were already 64 bits to handle LPAE, but implemented as two separate uint32_t fields. Combine them into a single uint64_t which can be used for all purposes. Since this requires touching every use, take the opportunity to rename the field to the architectural name. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Peter Maydell 提交于
Implement the A64 view of the VBAR system register. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-