Instead report them as successfully completed directly on submission, this
has 2 advantages:

1) This matches the timing of interrupt output packets on real hardware,
with the previous async handling, if an ep has an interval of say 500 ms,
then there would be 500+ ms between the submission and the guest seeing the
completion, as we wont do the write back until the qh gets polled again. And
in the mean time the guest may very well have timed out, as the guest can
reasonable expect a much quicker completion.

2) This fixes interrupt output packets potentially getting send twice
surrounding a migration. As we delay the writeback to guest memory until
the qh gets polled again, there is a window between completion and writeback
where migration can happen, in this case the destination will not know
about the completion, and it will execute the packet *again*

But it does also come with a disadvantage:

1) If the actual interrupt out to the real usb device fails, there is no
way to report this back to the guest.

This patch assumes however that interrupt outs in practice never fail, as
they are only used by specialized drivers, which are unlikely to issue illegal
requests (unlike general class drivers which often issue requests which some
devices don't implement). And that thus the advantages outway the disadvantage.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

No functional changes.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When we've no data to return from the interrupt endpoint, return NAK rather
then a 0 length packet.

CC: Alon Levy <alevy@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

I noticed this while making all devices with interrupt endpoints properly
do wakeup. While at it also add wakeup support.

Note that I've not tested this, but returning STALL for an interrupt ep
which has no data is cleary the wrong thing to do.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

uhci_async_cancel() already does a uhci_async_unlink().
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

It is possible for device disconnect and the guest trying to reset the port
(because of USB xact errors prior to the disconnect getting signaled) to race,
when we hit this race, the guest will write the port-control register with its
pre-disconnect value + the reset bit set, after which we have a disconnected
device with its port-enabled bit set in its port-control register, which
is no good :)
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a completions_only flag, and set this when running process_frame for async
completion handling, this fixes 2 issues in a single patch:

1) It makes sure async completed packets get written to guest mem immediately,
even if all the bandwidth for the frame was consumed from the timer run
process_frame. This is necessary as delaying their writeback to the next frame
can cause the completion to get lost on migration.

2) The calling of process_frame from a bh on async completion causes iso
tds to get server more often they should, messing up usb sound class device
timing. By only processing completed packets, the iso tds get skipped fixing
this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Having a qemu command line argument like "-vnc 127.0.0.1:0,to=99" is broken.
This have been break with commit 879e45c7.
Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Thanks to Alexander Graf for heads up.
Signed-off-by: Nmalc <av1474@comtv.ru>

* kiszka/queues/slirp:
  slirp: Add domain-search option to slirp's DHCP server
  slirp: Don't crash on packets from 0.0.0.0/8.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* bonzini/build-urgent:
  Makefile: Add missing dependency (fix parallel builds)
  tests: link in stubs
  libcacard: link in stubs
  libcacard: make unnesting rules available to Makefile.objs
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kwolf/for-anthony: (26 commits)
  qemu-io: Use bdrv_drain_all instead of qemu_aio_flush
  megasas: Use bdrv_drain_all instead of qemu_aio_flush
  vmdk: Fix data corruption bug in WRITE and READ handling
  fdc: remove last usage of FD_STATE_SEEK
  fdc: fix typo in zero constant
  fdc: remove double affectation of FD_MSR_CMDBUSY flag
  fdc-tests: add tests for VERIFY command
  fdc: implement VERIFY command
  fdc-test: Check READ ID
  fdc: fix false FD_SR0_SEEK
  fdc: fix FD_SR0_SEEK for initial seek on DMA transfers
  fdc: fix FD_SR0_SEEK for non-DMA transfers and multi sectors transfers
  fdc: use status0 field instead of a local variable
  fdc-test: add tests for non-DMA READ command
  fdc-test: insert media before fuzzing registers
  fdc-test: split test_media_change() test, so insert part can be reused
  fdc: Remove status0 parameter from fdctrl_set_fifo()
  aio: rename AIOPool to AIOCBInfo
  aio: use g_slice_alloc() for AIOCB pooling
  aio: switch aiocb_size type int -> size_t
  ...
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kraxel/usb.71:
  usb-host: fix splitted transfers
  usb-host: update tracing
  usb-redir: Set default debug level to warning
  usb-redir: Only add actually in flight packets to the in flight queue
  ehci: handle dma errors
  ehci: keep the frame timer running in case the guest asked for frame list rollover interrupts
  ehci: Don't verify the next pointer for periodic qh-s and qtd-s
  ehci: Better detection for qtd-s linked in circles
  ehci: Fixup q->qtdaddr after cancelling an already completed packet
  ehci: Don't access packet after freeing it
  usb: host-linux: Ignore parsing errors of the device descriptors
  usb-host: scan for usb devices when the vm starts
  usb: Fix (another) bug in usb_packet_map() for IOMMU handling
  fix live migration
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* stefanha/tracing:
  trace: Remove "info trace" from documents
  trace: document '-' syntax for disabling events
  trace: allow disabling events in events file
  Avoid all systemtap reserved words
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* amit/loadvm-irq-inj-fix:
  virtio-serial-bus: post_load send_event when vm is running
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* afaerber/qom-cpu:
  target-i386: Add Haswell CPU model
  target-i386/cpu: Add new Opteron CPU model
  target-i386/cpu: Name new CPUID bits
  qapi-types.h: Don't include qemu-common.h
  osdep: Move qemu_{open,close}() prototypes
  qemu-config.h: Include headers it needs
  vnc-palette.h: Include <stdbool.h>
  qemu-fsdev-dummy.c: Include module.h
  qdev: Split up header so it can be used in cpu.h
  Move qemu_irq typedef out of qemu-common.h
  qemu-common.h: Comment about usage rules
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* qemu-kvm/uq/master:
  kvm: Actually remove software breakpoints from list on cleanup
  acpi_piix4: fix migration of gpe fields
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There is no /dev/random on win32.

Cc: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The executables in i386-softmmu, i386-linux-user, ...
depend on the recently added libqemustub.a.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The operations for INDEX_op_deposit_i32 and INDEX_op_deposit_i64
are now supported and enabled by default.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit 32761257 enabled
qemu_ld/st optimization unconditionally for some hosts.

The TCG interpreter still does not support this kind of
optimization. Therefore builds with TCI fail with an
unresolved symbol tcg_out_tb_finalize. This is fixed here.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

commit 5f7319cd introduced GETPC() usage for MIPS, which is currently
not defined when building with --enable-tcg-interpreter. Add MIPS to
the list of targets we selectively define GETPC() for.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Weak symbols were a nice idea, but they turned out not to be a good one.
Toolchain support is just too sparse, in particular llvm-gcc is totally
broken.

This patch uses a surprisingly low-tech approach: a static library.
Symbols in a static library are always overridden by symbols in an
object file.  Furthermore, if you place each function in a separate
source file, object files for unused functions will not be taken in.
This means that each function can use all the dependencies that it needs
(especially QAPI stuff such as error_setg).

Thus, all stubs are placed in separate object files and put together in
a static library.  The library then is linked to all programs.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Tested-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Debian Wheezy has version 0.1.0 which is not compatible, avoid it.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'vga.1' of git://git.kraxel.org/qemu:
  vga: fix mmio vga register mapping
  vga: fix bochs alignment issue

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This function was only introduced in glib 2.28.0.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>