Before splitting op_helper.c and helper.c in the next patches,
fix style issues. No functional changes.

Replace also GCC specific __FUNCTION__ with
standard __func__.

Don't init static variable (cpu_s390x_init:inited) with 0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The old arithmetic assumed 32 physical address bits which is no longer
true for ARM since 3cc0cd61.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

fcmp{s,d,q} instructions are supposed to ignore quiet NaN (contrary to
the fcmpe{s,d,q} instructions), but the current code is wrongly setting
the NV exception in that case. Moreover the current code is duplicated:
first the arguments are checked for NaN to generate an exception, and
later in case the comparison is unordered (which can only happens if one
of the argument is a NaN), the same check is done to generate an
exception.

Fix that by calling clear_float_exceptions() followed by
check_ieee_exceptions() as for the other floating point instructions.
Use the _compare_quiet functions for fcmp{s,d,q} and the _compare ones
for fcmpe{s,d,q}. Simplify the flag setting by not clearing a flag that
is set the line just below.

This fix allows the math glibc testsuite to pass.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Put the following errno value mappings under #ifdef:

xtensa-semi.c: In function 'errno_h2g':
xtensa-semi.c:113: error: 'ENOTBLK' undeclared (first use in this function)
xtensa-semi.c:113: error: (Each undeclared identifier is reported only once
xtensa-semi.c:113: error: for each function it appears in.)
xtensa-semi.c:113: error: array index in initializer not of integer type
xtensa-semi.c:113: error: (near initialization for 'guest_errno')
xtensa-semi.c:124: error: 'ETXTBSY' undeclared (first use in this function)
xtensa-semi.c:124: error: array index in initializer not of integer type
xtensa-semi.c:124: error: (near initialization for 'guest_errno')
xtensa-semi.c:134: error: 'ELOOP' undeclared (first use in this function)
xtensa-semi.c:134: error: array index in initializer not of integer type
xtensa-semi.c:134: error: (near initialization for 'guest_errno')
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Report from smatch:

target-cris/translate.c:3464 cpu_dump_state(32) error:
 buffer overflow 'env->sregs' 4 <= 255

sregs is declared 'uint32_t sregs[4][16]', so the first index must be
less than 4 or ARRAY_SIZE(env->sregs).
Signed-off-by: NStefan Weil <sw@weilnetz.de>

 This change updates the CPU reset sequence to use a common piece of code
that figures out CPU state flags, fixing the problem with MIPS_HFLAG_COP1X
not being set where applicable that causes floating-point MADD family
instructions (and other instructions from the MIPS IV FP subset) to trap.

 As compute_hflags is now shared between op_helper.c and translate.c, the
function is now moved to a common header.  There are no changes to this
function.

 The problem was seen with the 24Kf MIPS32r2 processor in user emulation.
The new approach prevents system and user emulation from diverging -- all
the hflags state is initialized in one place now.
Signed-off-by: NMaciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The lan9118 emulation tries to compute the multicast index by calling
directly the crc32() function from zlib, but fails to get the correct
result.

Use the common compute_mcast_idx() function instead, which gives the
correct result. This fixes IPv6 support.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

 Find a hopefully proper patch attached. Take it or leave it.
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NHenning Schild <henning@hennsch.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix the spelling of 'palette' used in various local variables,
structure members and comments.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Guest errno values are taken from the newlib. Convert only those errno
values that can be returned from used system calls.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

For an example:

WARNING: braces {} are necessary even for single statement blocks
+    } else
+        return env->regs[R_EAX];

total: 0 errors, 1 warnings, 41 lines checked
Signed-off-by: NDon Slutz <Don@CloudSwitch.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add debug options to find this issue.  They were not listed
in the help because the are not simple to understand the output of.
Signed-off-by: NDon Slutz <Don@CloudSwitch.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add debug options to find this issue.  They were not listed
in the help because the are not simple to understand the output of.
Signed-off-by: NDon Slutz <Don@CloudSwitch.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add debug options to find this issue.  They were not listed
in the help because the are not simple to understand the output of.
Signed-off-by: NDon Slutz <Don@CloudSwitch.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is XSA-17 / CVE-2012-3515
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QEMU will hang when fed the following command-line

  qemu-system-mips -kernel vmlinux-2.6.32-5-4kc-malta -append "console=ttyS0" -nographic -net none

The -net none is important otherwise it seems some events are generated
causing the things to work. When it doesn't work, the guest hangs when
measuring the CPU frequency, after the following line:

  [    0.000000] NR_IRQS:256

Pressing a key on the serial port unblocks it, hinting that the problem
is due to the recent elimination of the 1 second timeout in the main
loop.

The problem is that because init_timer_alarm sets the timer's pending
flag to true, the alarm timer is never armed until after the first time
through the main loop.  Thus the bug started when QEMU started testing
the pending flag in qemu_mod_timer (commit 1828be31, more alarm timer
cleanup, 2010-03-10).

But actually, it isn't true at all that a timer is pending when the
alarm timer is created, and the real bug has been latent forever: the
fix is to remove the bogus setting of pending flag.
Reported-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com>
Tested-by: NAurelien Jarno <aurelien@aurel32.net>
Tested-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This prevents guest from proceeding with uninitialised garbage returned
from unimplemented simcalls.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

ccc-analyzer reports this warning:

console.c:1090:29: warning: Dereference of null pointer
        if (active_console->cursor_timer) {
                            ^

Function console_select allows active_console to be NULL,
but would crash when accessing cursor_timer. Fix this.
Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kraxel/usb.61:
  uas: move transfer kickoff
  ehci: Fix interrupt endpoints no longer working
  ehci: handle TD deactivation of inflight packets
  ehci: add ehci_cancel_queue()
  ehci: simplify ehci_state_executing
  ehci: Remove unnecessary ehci_flush_qh call
  ehci: Schedule async-bh when IAAD bit gets set
  ehci: Fix NULL ptr deref when unplugging an USB dev with an iso stream active
  usb: unique packet ids
  usb: Halt ep queue en cancel pending packets on a packet error
  fix info qtree indention

* kwolf/for-anthony:
  qemu-iotests: add backing file smaller than image test case
  stream: complete early if end of backing file is reached
  qed: refuse unaligned zero writes with a backing file

Kick next scsi transfer from request release callback instead of command
completion callback, otherwise we might get stuck in case scsi_req_unref()
doesn't release the request instantly due to someone else holding a
reference too.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

One of the recent changes (likely the addition of queuing support) has broken
interrupt endpoints, this patch fixes this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>

Check the TDs of inflight packets, cancel
packets in case the guest clears the active bit.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Factor out function to cancel all packets of a queue.
No behavior change.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

ehci_state_executing does not need to check for p->usb_status == USB_RET_ASYNC
or USB_RET_PROCERR, since ehci_execute_complete already does a similar check
and will trigger an assert if either value is encountered.

USB_RET_ASYNC should never be the packet status when execute_complete runs
for obvious reasons, and USB_RET_PROCERR is only used by ehci_state_execute /
ehci_execute not by ehci_state_executing / ehci_execute_complete.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

ehci_qh_do_overlay() already calls ehci_flush_qh() before it returns, calling
it twice is useless.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

After the "ehci: Print a warning when a queue unexpectedly contains packets
on cancel" commit. Under certain reproducable conditions I was getting the
following message: "EHCI: Warning queue not empty on queue reset".

After aprox. 8 hours of debugging I've finally found the cause. The Linux EHCI
driver has an IAAD watchdog, to work around certain EHCI hardware sometimes
not acknowledging the doorbell at all. This watchdog has a timeout of 10 ms,
which is less then the time between 2 runs through the async schedule when
async_stepdown is at its highest value.

Thus the watchdog can trigger, after which Linux clears the IAAD bit and
re-uses the QH. IOW we were not properly detecting the unlink of the qh, due
to us missing (ignoring for more then 10 ms) the IAAD command, which triggered
the warning.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>

This patch adds IDs to usb packets.  Those IDs are (a) supposed to be
unique for the lifecycle of a packet (from packet setup until the packet
is either completed or canceled) and (b) stable across migration.

uhci, ohci, ehci and xhci use the guest physical address of the transfer
descriptor for this.

musb needs a different approach because there is no transfer descriptor.
But musb also doesn't support pipelining, so we have never more than one
packet per endpoint in flight.  So we go create an ID based on endpoint
and device address.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

For controllers which queue up more then 1 packet at a time, we must halt the
ep queue, and inside the controller code cancel all pending packets on an
error.

There are multiple reasons for this:
1) Guests expect the controllers to halt ep queues on error, so that they
get the opportunity to cancel transfers which the scheduled after the failing
one, before processing continues

2) Not cancelling queued up packets after a failed transfer also messes up
the controller state machine, in the case of EHCI causing the following
assert to trigger: "assert(p->qtdaddr == q->qtdaddr)" at hcd-ehci.c:2075

3) For bulk endpoints with pipelining enabled (redirection to a real USB
device), we must cancel all the transfers after this a failed one so that:
a) If they've completed already, they are not processed further causing more
   stalls to be reported, originating from the same failed transfer
b) If still in flight, they are cancelled before the guest does
   a clear stall, otherwise the guest and device can loose sync!

Note this patch only touches the ehci and uhci controller changes, since AFAIK
no other controllers actually queue up multiple transfer. If I'm wrong on this
other controllers need to be updated too!

Also note that this patch was heavily tested with the ehci code, where I had
a reproducer for a device causing a transfer to fail. The uhci code is not
tested with actually failing transfers and could do with a thorough review!
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Without the patch bus properties are are not in line with the other
properties:

[ ... ]
  dev: fw_cfg, id ""
    ctl_iobase = 0x510
    data_iobase = 0x511
      irq 0
      mmio ffffffffffffffff/0000000000000002
      mmio ffffffffffffffff/0000000000000001
[ ... ]

With the patch applied everything is lined up properly:

[ ... ]
  dev: fw_cfg, id ""
    ctl_iobase = 0x510
    data_iobase = 0x511
    irq 0
    mmio ffffffffffffffff/0000000000000002
    mmio ffffffffffffffff/0000000000000001
[ ... ]

Needed to make the autotest qtree parser happy.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Commit ef8621b1 added an include
file which is not available for MinGW compilations.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The facility to use/unuse vectors dynamically is helpful
for virtio but little else: everyone just seems to use
vectors in their init function.

Avoid clearing msix vector use info on reset and load.
For virtio, clear it explicitly.
This should fix regressions reported with ivshmem - though
I didn't test this, I verified that virtio keeps
working like it did.
Tested-by: NCam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Support get/set of new PV EOI MSR, for migration.
Add an optional section for MSR value - send it
out in case MSR was changed from the default value (0).
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>